Update common peer configurations and apps
The peer update process described in this topic ensures that all peer nodes share a common set of key configuration files. You must manually invoke this process to distribute and update common files, including apps, to the peer nodes. The process also runs automatically when a peer joins the cluster.
For information on peer configuration files, see Manage common configurations across all peers. That topic details exactly which files must be identical across all peers. In brief, the configuration files that must be identical in most circumstances are
transforms.conf. Other configuration files can also be identical, depending on the needs of your system. Since apps usually include versions of those key files, you should also maintain a common set of apps across all peers.
The set of configuration files and apps common to all peers, which is managed from the master and distributed to the peers in a single operation, is called the configuration bundle. The process used to distribute the configuration bundle is known as the configuration bundle method.
To distribute new or edited configuration files or apps across all the peers, you add the files to the configuration bundle on the master and tell the master to distribute the files to the peers.
Structure of the configuration bundle
The configuration bundle consists of the set of files and apps common to all peer nodes.
On the master
On the master, the configuration bundle resides under the
$SPLUNK_HOME/etc/master-apps directory. The set of files under that directory constitute the configuration bundle. They are always distributed as a group to all the peers. The directory has this structure:
$SPLUNK_HOME/etc/master-apps/ _cluster/ default/ local/ <app-name>/ <app-name>/ ...
Note the following:
/_clusterdirectory is a special location for configuration files that need to be distributed across all peers:
/_cluster/defaultsubdirectory contains a default version of
indexes.conf. Do not add any files to this directory and do not change any files in it. This peer-specific default
indexes.confhas a higher precedence than the standard default
indexes.conf, located under
/_cluster/localsubdirectory is where you can put new or edited configuration files that you want to distribute to the peers.
- For 5.0/5.0.1 upgrades: In Splunk versions 5.0 and 5.0.1, the
/_clusterdirectory was named
/cluster(no underscore). When you upgrade a 5.0/5.0.1 master node to 5.0.2 or later, its
/clusterdirectory is automatically renamed to
/_cluster. When you then restart the master following completion of the upgrade, it performs a rolling restart on its peer nodes and pushes the new bundle, with the renamed
/_clusterdirectory, to the peers. The
slave-appsdirectory on all the peer nodes (including any 5.0/5.0.1 peers) will then contain the renamed directory.
/<app-name>subdirectories are optional. They provide a way to distribute any app to the peer nodes. Create and populate them as needed. For example, to distribute "appBestEver" to the peer nodes, place a copy of that app in its own subdirectory:
- To delete an app that you previously distributed to the peers, remove its directory from the configuration bundle. When you next push the bundle, the app will be deleted from each peer.
- The master only pushes the contents of subdirectories under
master-apps. It will not push any standalone files directly under
master-apps. For example, it will not push the standalone file
/master-apps/file1. Therefore, be sure to place any standalone configuration files in the
You explicitly tell the master when you want it to distribute the latest configuration bundle to the peers. In addition, when a peer registers with the master (for example, when the peer joins the cluster), the master distributes the current configuration bundle to it.
Caution: When the master distributes the bundle to the peers, it distributes the entire bundle, overwriting the entire contents of any configuration bundle previously distributed to the peers.
master-apps location is only for peer node files. The master does not use the files in that directory for its own configuration needs.
On the peers
On the peers, the distributed configuration bundle resides under
$SPLUNK_HOME/etc/slave-apps. This directory is created soon after a peer is enabled, when the peer initially gets the latest bundle from the master.
Except for the different name for the top-level directory, the structure and contents of the configuration bundle are the same as on the master:
$SPLUNK_HOME/etc/slave-apps/ _cluster/ default/ local/ <app-name>/ <app-name>/ ...
Important: Leave the downloaded files in this location and do not edit them. If you later distribute an updated version of a configuration file or app to the peers, it will overwrite any earlier version in
$SPLUNK_HOME/etc/slave-apps. You want this to occur, because all peers in the cluster must be using the same versions of the files in that directory.
For the same reason, do not add any files or subdirectories directly to
$SPLUNK_HOME/etc/slave-apps. The directory gets overwritten each time the master redistributes the configuration bundle.
When Splunk evaluates configuration files, the files in the
$SPLUNK_HOME/etc/slave-apps/[_cluster|<app-name>]/local subdirectories have the highest precedence. For information on configuration file precedence, see Configuration file precedence in the Admin Manual.
Distribute the configuration bundle
To distribute new or changed files and apps across all peers, do the following:
1. Prepare the files and apps and test them.
2. Move the files and apps into the configuration bundle on the master node.
3. (Optional.) Validate the bundle.
4. Tell the master to apply the bundle to the peers.
The master pushes the entire bundle to the peers. This overwrites the contents of the peers' current bundle.
1. Prepare the files and apps for the configuration bundle
Make the necessary edits to the files you want to distribute to the peers. It is advisable that you then test the files, along with any apps, on a standalone test indexer to confirm that they are working correctly, before distributing them to the set of peers. Try to combine all updates in a single bundle, to reduce the impact on the work of the peer nodes.
Important: If the configuration bundle subdirectories contain any
indexes.conf files that define new indexes, you must explicitly set each index's
repFactor attribute to
auto. This is necessary for
indexes.conf files that reside in app subdirectories, as well as any
indexes.conf file in the
_cluster subdirectory. See The indexes.conf repFactor attribute for details.
2. Move the files to the master node
When you are ready to distribute the files and apps, copy them to
$SPLUNK_HOME/etc/master-apps/ on the master:
- Put apps directly under that directory. For example,
- Put standalone files in the
3. Validate the bundle
This step is optional.
As part of the next step, Apply the bundles to the peers, the peers individually validate the bundle. Specifically, each peer validates the settings for all
indexes.conf files in the bundle. If all peers successfully validate the bundle, the cluster completes the process of applying the bundle.
In the current step, you can optionally validate the bundle without applying it. Once you confirm that the bundle is valid across all peer nodes, you can then apply it as a separate step.
Validation can be useful, for example, if you want to ensure that the bundle will apply across all peer nodes without problem. The validation process provides information useful for debugging invalid bundles.
To validate the bundle, run
splunk validate cluster-bundle:
splunk validate cluster-bundle
This command returns a message confirming that bundle validation has started. In certain failure conditions, it also indicates the cause of failure. Finally, it suggests that you run the
splunk show cluster-bundle-status command for the status of bundle validation:
splunk show cluster-bundle-status
This command indicates validation success. In the case of validation failure, it provides insight into the cause of failure.
Here is an example of the return from
splunk show cluster-bundle-status after a successful validation:
master active_bundle checksum=C249B794C8E0D2F685944C05079767BB timestamp=1468607719 (in localtime=Fri Jul 15 11:35:19 2016) latest_bundle checksum=C249B794C8E0D2F685944C05079767BB timestamp=1468607719 (in localtime=Fri Jul 15 11:35:19 2016) last_validated_bundle checksum=A334B794C8E0D2F685944C05079767BB last_validation_succeeded=1 timestamp=1468607719 (in localtime=Fri Jul 15 11:35:19 2016) cluster_status=None peer1 4F6107BB-C655-453F-A7A8-2C7651608881 default active_bundle=C249B794C8E0D2F685944C05079767BB latest_bundle=C249B794C8E0D2F685944C05079767BB last_validated_bundle=A334B794C8E0D2F685944C05079767BB last_validation_succeeded=1 restart_required_apply_bundle=0 status=Up ...
last_validated_bundle field identifies the newly validated bundle. Notice that it differs from the
active_bundle, which identifies the bundle that was most recently applied and is currently active across the peer nodes.
last_validation_succeeded=1 field indicates that validation succeeded.
You can determine whether the validation is still in progress, by examining the
cluster_status field and looking for a status of "Validation".
Here is an example of the return from
splunk show cluster-bundle-status after a validation failure on the master:
master active_bundle checksum=7CFA6F2EF165481D0F80FCB3BC579885 timestamp=1468466253 (in localtime=Thu Jul 14 11:17:33 2016) latest_bundle checksum=7CFA6F2EF165481D0F80FCB3BC579885 timestamp=1468466253 (in localtime=Thu Jul 14 11:17:33 2016) last_validated_bundle checksum=CF79637E151B1FDE5D39F3217F31868C last_validation_succeeded=0 timestamp=1468466253 (in localtime=Thu Jul 14 11:17:33 2016) invalid_bundle bundle_path : /usr/local/eserv/splunk/var/run/splunk/cluster/remote-bundle/20f747a0007828a6638fd10bc0d17c44-1468893441.bundle bundle_validation_errors_on_master: checksum : CF79637E151B1FDE5D39F3217F31868C timestamp : 1468893441 cluster_status=None bundle_validation_errors: Cannot create index 'main2': path of homePath must be absolute ('$SPLUK_DB/main2/db') invalid_bundle_id : CF79637E151B1FDE5D39F3217F31868C peer1 10B02E41-5EDB-487F-9528-5FF1A4FD7311 default active_bundle=7CFA6F2EF165481D0F80FCB3BC579885 latest_bundle=7CFA6F2EF165481D0F80FCB3BC579885 last_validated_bundle=CF79637E151B1FDE5D39F3217F31868C last_validation_succeeded=0 restart_required_apply_bundle=0 status=Up ...
last_validation_succeeded=0 field indicates that validation failed. Information in the master entry indicates that the failure occurred on the master.
Caution: If you validate the bundle without applying it, the contents of the
$SPLUNK_HOME/etc/master-apps directory on the master will differ from the contents of the
$SPLUNK_HOME/etc/slave-apps directory on the peer nodes until you do apply the bundle. This has no effect on the operation of the cluster, but it is important to remain aware that the difference exists.
4. Apply the bundle to the peers
To apply the configuration bundle to the peers, you can use Splunk Web or the CLI.
Use Splunk Web to apply the bundle
To apply the configuration bundle to the peers, go to the master node dashboard:
1. Click Settings on the upper right side of Splunk Web.
2. In the Distributed Environment group, click Indexer clustering.
3. Click the Edit button on the upper right corner of the dashboard and then select the Distribute Configuration Bundle option.
A dashboard appears with information on the last successful push. It also contains a button, Distribute Configuration Bundle.
4. Click the Distribute Configuration Bundle button.
A pop-up window warns you that the distribution might, under certain circumstances, initiate a restart of all the peer nodes. For information on which configuration changes cause a peer restart, see Restart or reload after configuration bundle changes?.
5. Click Push Changes to continue.
The screen provides information on the distribution progress. Once the distribution completes or aborts, the screen indicates the result. In the case of an aborted distribution, it indicates which peers could not receive the distribution. Each peer must successfully receive and apply the distribution. If any peer is unsuccessful, none of the peers will apply the bundle.
Once the process completes successfully, the peers will be using the new set of configurations, now located in their local
Important: Leave the files in
For more details on the internals of the distribution process, read the next section on applying the bundle through the CLI.
Use the CLI to apply the bundle
1. To apply the configuration bundle to the peers, run this CLI command on the master:
splunk apply cluster-bundle
It responds with this warning message:
Warning: Under some circumstances, this command will initiate a rolling restart of all peers. This depends on the contents of the configuration bundle. For details, refer to the documentation. Do you wish to continue? [y/n]:
For information on which configuration changes cause a rolling restart, see Restart or reload after configuration bundle changes?.
2. To proceed, you need to respond to the message with
y. You can avoid this message entirely by appending the flag
--answer-yes to the command:
splunk apply cluster-bundle --answer-yes
splunk apply cluster-bundle command causes the master to distribute the new configuration bundle to the peers, which then individually validate the bundle. During this process, each peer validates the settings for all
indexes.conf files in the bundle. After all peers successfully validate the bundle, the master coordinates a rolling restart of all the peer nodes, if necessary.
The download and validation process usually takes just a few seconds to complete. If any peer is unable to validate the bundle, it sends a message to the master, and the master displays the error on its dashboard in Splunk Web. The process will not continue to the next phase - reloading or restarting the peers - unless all peers successfully validate the bundle.
If validation is not successful, you must fix any problems noted by the master and rerun
splunk apply cluster-bundle.
Once validation is complete, the master tells the peers to reload or, if necessary, it initiates a rolling restart of all the peers. For details on how a rolling restart works, see Use rolling restart.
When the process is complete, the peers will be using the new set of configurations, which will be located in their local
Important: Leave the files in
Once an app has been distributed to the set of peers, you launch and manage it on each peer in the usual manner, with Splunk Web. See Managing app configurations and properties in the Admin Manual.
apply cluster-bundle command takes an optional flag,
--skip-validation, for use in cases where a problem exists in the validation process. You should only use this flag under the direction of Splunk Support and after ascertaining that the bundle is valid. Do not use this flag to circumvent the validation process unless you know what you are doing.
You can also validate the bundle without applying it. This is useful if you are debugging some validation issues. See Validate the configuration bundle.
Use the CLI to view the status of the bundle update process
To see how the cluster bundle update is proceeding, run this command from the master:
splunk show cluster-bundle-status
This command tells you whether bundle validation succeeded or failed. It also indicates the restart status of each peer.
Settings that you should not distribute through the configuration bundle
$SPLUNK_HOME/etc/slave-apps directory on the peers is read-only. This is necessary and beneficial behavior, because each time you distribute a new bundle, the directory gets overwritten in its entirety. You would thus otherwise lose any changes made to settings in that directory. Also, the cluster relies on the settings in that directory being identical across all peers.
Therefore, if you distribute a setting through the configuration bundle method that the peer needs to update automatically in some way, the peer will do so by creating a new version of the app under
$SPLUNK_HOME/etc/apps. Since you cannot have two apps with the same name, this generates "unexpected duplicate app" errors in
A common cause of this behavior is distributing SSL passwords through the configuration bundle. Splunk Enterprise overwrites the password with an encrypted version upon restart. But if you distribute the setting through the configuration bundle, the peers cannot overwrite the unencrypted password in its bundle location under
$SPLUNK_HOME/etc/slave-apps. Therefore, upon restart after bundle push, they instead write the encrypted version to
$SPLUNK_HOME/etc/apps, in an app directory with the same name as its name under
For example, do not push the following setting in
[SSL] password = <your_password>
If the setting is in an app directory called "newapp" in the configuration bundle, upon restart the peer will create a "newapp" directory under
$SPLUNK_HOME/etc/apps and put the setting there. This results in duplicate "newapp" apps.
Distribution of the bundle when a peer starts up
After you initially configure a Splunk instance as a peer node, you need to restart it manually in order for it to join the cluster, as described in Enable the peer nodes. During this restart, the peer connects with the master, downloads the current configuration bundle, validates the bundle locally, and then restarts again. The peer will only join the cluster if bundle validation succeeds. This same process also occurs when an offline peer comes back online.
If validation fails, the user needs to fix the errors and run
splunk apply cluster-bundle from the master.
Restart or reload after configuration bundle changes?
Some changes to files in the configuration bundle require that the peers restart. In other cases, the peers can just reload, avoiding any interruption to indexing or searching. The bundle reload phase on the peers determines whether a restart is required and directs the master to initiate a rolling restart of the peers only if necessary.
Reload occurs when:
- If you are using load-balanced forwarders to send data to the peer nodes and you make any changes to
- If you are not using load-balanced forwarders and
- you add a new sourcetype in
- you add or update any
- you add any new stanzas in
- you add a new sourcetype in
- You make any of these changes in
- Adding new index stanzas
- Enabling or disabling an index with no data
- Changing any attributes not listed as requiring restart in Determine which indexes.conf changes require restart.
Restart occurs when:
- The configuration bundle contains changes to any configuration files besides
- You make any changes to
transforms.conf, other than those specified in the reload list, above.
- You make any of the
indexes.confchanges described in Determine which indexes.conf changes require restart.
- You delete an existing app from the configuration bundle.
Use deployment server to distribute the apps to the master
Although you cannot use deployment server to directly distribute apps to the peers, you can use it to distribute apps to the master node's configuration bundle location. Once the apps are in that location, the master can distribute them to the peer nodes, using the configuration bundle method described in this topic.
In addition to the deployment server, you can also use third party distributed configuration management software, such as Puppet or Chef, to distribute apps to the master.
To use the deployment server to distribute files to the configuration bundle on the master:
1. Configure the master as a client of the deployment server, as described in Configure deployment clients in Updating Splunk Enterprise Instances.
2. On the master, edit deploymentclient.conf and set the
repositoryLocation attribute to the
[deployment-client] serverRepositoryLocationPolicy = rejectAlways repositoryLocation = $SPLUNK_HOME/etc/master-apps
3. On the deployment server, create and populate one or more deployment apps for download to the master's configuration bundle. Make sure that the apps follow the structural requirements for the configuration bundle, as outlined earlier in the current topic. See Create deployment apps in Updating Splunk Enterprise Instances for information on creating deployment apps.
4. Create one or more server classes that map the master to the deployment apps in the usual way.
5. Each server class must include the
stateOnClient = noop setting:
[serverClass:<serverClassName>] stateOnClient = noop
Note: Do not override this setting at the app stanza level.
6. Download the apps to the master node.
Once the master receives the new or updated deployment apps in the configuration bundle, you can distribute the bundle to the peers, using the method described in the current topic.
Important: Take steps to ensure that the master does not restart automatically after receiving the deployment apps. Specifically, when defining deployment app behavior, do not change the value of the
restartSplunkd setting from its default of
serverclass.conf. If you are using forwarder management to define your server classes, make sure that the field Restart splunkd on the Edit App screen is not checked.
For detailed information on the deployment server and how to perform the various operations necessary, read the Updating Splunk Enterprise Instances manual.
Configure the peer indexes in an indexer cluster
Manage configurations on a peer-by-peer basis
This documentation applies to the following versions of Splunk® Enterprise: 6.5.0, 6.5.1, 6.5.2, 6.5.3, 6.5.4, 6.5.5, 6.5.6, 6.5.7, 6.5.8, 6.5.9