health.conf

The following are the spec and example files for health.conf.

health.conf.spec

#   Version 7.2.0
#
# This file sets the default thresholds for Splunk Enterprise's built
# in Health Report.
#
# Feature stanzas contain indicators, and each indicator has two thresholds:
# * Yellow: Indicates something is wrong and should be investigated.
# * Red: Means that the indicator is effectively not working.
#
# There is a health.conf in the $SPLUNK_HOME/etc/system/default/ directory.
# Never change or copy the configuration files in the default directory.
# The files in the default directory must remain intact and in their original
# location.
#
# To set custom configurations, create a new file with the name health.conf in
# the $SPLUNK_HOME/etc/system/local/ directory. Then add the specific settings
# that you want to customize to the local configuration file.
#
# To learn more about configuration files (including precedence), see the
# documentation located at
# http://docs.splunk.com/Documentation/Splunk/latest/Admin/Aboutconfigurationfiles

[health_reporter]

full_health_log_interval = <number>
* The amount of time, in seconds, that elapses between each ‘PeriodicHealthReporter=INFO’ log entry.
* Default: 30.

suppress_status_update_ms = <number>
* The minimum amount of time, in milliseconds, that must elapse between an
  indicator's health status changes.
* Changes that occur earlier will be suppressed.
* Default: 300.

alert.disabled = [0|1]
* A value of 1 disables the alerting feature for health reporter.
* If the value is set to 1, alerting for all features is disabled.
* Default: 0 (enabled)

alert.actions = <string>
* The alert actions that will run when an alert is fired.

alert.min_duration_sec = <integer>
* The minimum amount of time, in seconds, that the health status color must 
  persist within threshold_color before triggering an alert.
* Default: 60.

alert.threshold_color = [yellow|red]
* The health status color that will trigger an alert.
* Default: red.

alert.suppress_period = <integer>[m|s|h|d]
* The minimum amount of time, in [minutes|seconds|hours|days], that must
  elapse between each fired alert.
* Alerts that occur earlier will be sent as a batch after this time period
  elapses.
* Default: 10 minutes.

[clustering]

health_report_period = <number>
* The amount of time, in seconds, that elapses between each Clustering
  health report run.
* Default: 20.
disabled = [0|1]
* A value of 1 disables the clustering feature health check.
* Default: 0 (enabled)

[feature:*]

suppress_status_update_ms = <number>
* The minimum amount of time, in milliseconds, that must elapse between an indicator's
  health status changes.
* Changes that occur earlier will be suppressed.
* Default: 300.

display_name = <string>
* A human readable name for the feature.

alert.disabled = [0|1]
* A value of 1 disables alerting for this feature.
* If alerting is disabled in the [health_reporter] stanza, alerting for this feature is disabled,
  regardless of the value set here.
* Otherwise, if the value is set to 1, alerting for all indicators is disabled.
* Default: 0 (enabled)

alert.min_duration_sec = <integer>
* The minimum amount of time, in seconds, that the health status color must 
  persist within threshold_color before triggering an alert.

alert.threshold_color = [yellow|red]
* The health status color to trigger an alert.
* Default: red.

indicator:<indicator name>:description = <string>
* Description of this indicator to help users to make basic decisions such as:
  Turning indicators on or off
  Adjusting the threshold of an indicator
  Turning on alerting for an indicator

indicator:<indicator name>:<indicator color> = <number>
* There are various indicator names. See your health.conf for the complete list.
* There are two valid colors: yellow and red.
* These settings should not be adjusted lightly. If the numbers are set too
  high, you might inadvertently mask serious errors that the Health Report is
  trying to bring to your attention.

alert:<indicator name>.disabled = [0|1]
* A value of 1 disables alerting for this indicator.
* Default: 0 (enabled)

alert:<indicator name>.min_duration_sec = <integer>
* The minimum amount of time, in seconds, that the health status color must 
  persist within threshold_color before triggering an alert.

alert:<indicator name>.threshold_color = [yellow|red]
* The health status color to trigger an alert.

[alert_action:*]

disabled = [0|1]
* A value of 1 disables this alert action.
* Default: 0 (enabled)

action.<action parameter> = <string>
* There are various parameters for different alert actions.
* Each value defines one parameter for the alert action.

health.conf.example

#   Version 7.2.0
#
# This file contains an example health.conf.  Use this file to configure thresholds
# for Splunk Enterprise's built in Health Report.
#
# To use one or more of these configurations, copy the configuration block
# into health.conf in $SPLUNK_HOME/etc/system/local/. You must restart
# Splunk to enable configurations.

[health_reporter]
# Every 30 seconds a new ‘PeriodicHealthReporter=INFO’ log entry will be created.
full_health_log_interval = 30
# If an indicator’s health status changes before 600 milliseconds elapses,
# the status change will be suppressed.
suppress_status_update_ms = 600
# Alerting for all features is enabled.
# You can disable alerting for each feature by setting 'alert.disabled' to 1.
alert.disabled = 0

# If you don't want to send alerts too frequently, you can define a minimum
# time period that must elapse before another alert is fired. Alerts triggered
# during the suppression period are sent after the period expires as a batch.
# The suppress_period value can be in seconds, minutes, hours, and days, and
# uses the format: 60s, 60m, 60h and 60d.
# Default is 10 minutes.
alert.suppress_period = 30m


[alert_action:email]
# Enable email alerts for the health report.
# Before you can send an email alert, you must configure the email notification
# settings on the email settings page.
# In the 'Search and Reporting' app home page, click Settings > Server settings
# > Email settings, and specify values for the settings.
# After you configure email settings, click Settings > Alert actions.
# Make sure that the 'Send email' option is enabled.
disabled = 0

# Define recipients when an email alert is triggered.
# You can define 'to', 'cc', and 'bcc' recipients.
# For multiple recipients in a list, separate email addresses with commas.
# If there is no recipient for a certain recipient type (e.g. bcc), leave the value blank.
action.to = admin_1@testcorp.example, admin_2@testcorp.example
action.cc = admin_3@testcorp.example, admin_4@testcorp.example
action.bcc =

[alert_action:pagerduty]
# Enable Pager Duty alerts for the health report.
# Before you can send an alert to PagerDuty, you must configure some settings
# on both the PagerDuty side and the Splunk Enterprise side.
# In PagerDuty, you must add a service to save your new integration.
# From the Integrations tab of the created service, copy the Integration Key
# string to the 'action.integration_url_override' below.
# On the Splunk side, you must install the PagerDuty Incidents app from
# Splunkbase.
# After you install the app, in Splunk Web, click Settings > Alert actions.
# Make sure that the PagerDuty app is enabled.
disabled = 0
action.integration_url_override = 123456789012345678901234567890ab

[clustering]
# Clustering health report will run in every 20 seconds.
health_report_period = 20
# Enable the clustering feature health check.
disabled = 0

[feature:s2s_autolb]
# If more than 20% of forwarding destinations have failed, health status changes to yellow.
indicator:s2s_connections:yellow = 20
# If more than 70% of forwarding destinations have failed, health status changes to red.
indicator:s2s_connections:red = 70
# Alerting for all indicators is disabled.
alert.disabled = 1

[feature:batchreader]
# Enable alerts for feature:batchreader. If there is no 'alert.disabled' value
# specified in a feature stanza, then the alert is enabled for the feature by
# default.
# You can also enable/disable alerts at the indicator level, using the setting:
# 'alert:<indicator name>.disabled'.
alert.disabled = 0

# You can define which color triggers an alert.
# If the value is yellow, both yellow and red trigger an alert.
# If the value is red, only red triggers an alert.
# Default value is red.
# You can also define the threshold_color for each indicator using the setting:
# 'alert:<indicator name>.threshold_color'.
# Indicator level setting overrides the feature level threshold_color setting.
alert.threshold_color = red

# You can define the duration that an unhealthy status persists before the alert fires.
# Default value is 60 seconds.
# You can also define the min_duration_sec for each indicator using the setting:
# 'alert:<indicator name>.min_duration_sec'.
# Indicator level setting overrides feature level min_duration_sec setting.
alert.min_duration_sec = 30