Splunk Enterprise version 7.2 is no longer supported as of April 30, 2021. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk® Enterprise.
For documentation on the most recent version, go to the latest release.
limits.conf
The following are the spec and example files for limits.conf.
limits.conf.spec
# Version 7.2.3 #
OVERVIEW
# This file contains descriptions of the settings that you can use to # configure limitations for the search commands. # # Each stanza controls different search commands settings. # # There is a limits.conf file in the $SPLUNK_HOME/etc/system/default/ directory. # Never change or copy the configuration files in the default directory. # The files in the default directory must remain intact and in their original # location. # # To set custom configurations, create a new file with the name limits.conf in # the $SPLUNK_HOME/etc/system/local/ directory. Then add the specific settings # that you want to customize to the local configuration file. # For examples, see limits.conf.example. You must restart the Splunk instance # to enable configuration changes. # # To learn more about configuration files (including file precedence) see the # documentation located at # http://docs.splunk.com/Documentation/Splunk/latest/Admin/Aboutconfigurationfiles # # About Distributed Search # Unlike most settings which affect searches, limits.conf settings are not # provided by the search head to be used by the search peers. This means # that if you need to alter search-affecting limits in a distributed # environment, typically you will need to modify these settings on the # relevant peers and search head for consistent results. #
GLOBAL SETTINGS
# Use the [default] stanza to define any global settings. # * You can also define global settings outside of any stanza, at the top of # the file. # * Each .conf file should have at most one default stanza. If there are # multiple default stanzas, settings are combined. In the case of # multiple definitions of the same setting, the last definition in the # file takes precedence. # * If a setting is defined at both the global level and in a specific # stanza, the value in the specific stanza takes precedence. # # CAUTION: Do not alter the settings in the limits.conf file unless you know # what you are doing. Improperly configured limits might result in # splunkd crashes, memory overuse, or both.
[default]
DelayArchiveProcessorShutdown = <bool>
* Specifies whether during splunk shutdown archive processor should finish
processing archive file under process.
* When set to “false”: The archive processor abandons further processing of
the archive file and will process again from start again.
* When set to “true”: The archive processor will complete processing of
the archive file. Shutdown will be delayed.
* Default: false
max_mem_usage_mb = <non-negative integer>
* Provides a limitation to the amount of RAM, in megabytes (MB), a batch of
events or results will use in the memory of a search process.
* Operates on an estimation of memory use which is not exact. The estimation can
deviate by an order of magnitude or so to both the smaller and larger sides.
* The limitation is applied in an unusual way; if the number of results or
events exceeds maxresults, AND the estimated memory exceeds this limit, the
data is spilled to disk.
* This means, as a general rule, lower limits will cause a search to use more
disk I/O and less RAM, and be somewhat slower, but should cause the same
results to typically come out of the search in the end.
* This limit is applied currently to a number, but not all search processors.
However, more will likely be added as it proves necessary.
* The number is thus effectively a ceiling on batch size for many components of
search for all searches run on this system.
* When set to “0”: Specifies that the size is unbounded. Searches might be
allowed to grow to arbitrary sizes.
* NOTE:
* The mvexpand command uses the ‘max_mem_usage_mb’ value in a different way.
* The mvexpand command has no combined logic with ‘maxresults’.
* If the memory limit is exceeded, output is truncated, not spilled to disk.
* The stats command processor uses the ‘max_mem_usage_mb’ value in the following way.
* If the estimated memory usage exceeds the specified limit, the results are
spilled to disk.
* If 0 is specified, the results are spilled to the disk when the number of
results exceed the ‘maxresultrows’ setting.
* The eventstats command processor uses the ‘max_mem_usage_mb’ value in the
following way.
* Both the ‘max_mem_usage_mb’ and the ‘maxresultrows’ settings are used to determine
the maximum number of results to return. If the limit for one setting is reached,
the eventstats processor continues to return results until the limit for the
other setting is reached. When both limits are reached, the eventstats command
processor stops adding the requested fields to the search results.
* If you set ‘max_mem_usage_mb’ to 0, the eventstats command processor uses
only the ‘maxresultsrows’ setting as the threshold. When the number of
results exceeds the ‘maxresultsrows’ setting, the eventstats command processor
stops adding the requested fields to the search results.
* Default: 200
min_batch_size_bytes = <integer>
* Specifies the size, in bytes, of the file/tar after which the
file is handled by the batch reader instead of the trailing processor.
* Global parameter, cannot be configured per input.
* NOTE: Configuring this to a very small value could lead to backing up of jobs
at the tailing processor.
* Default: 20,971,520 bytes
regex_cpu_profiling = <bool>
* Enable CPU time metrics for RegexProcessor. Output will be in the
metrics.log file.
Entries in metrics.log will appear per_host_regex_cpu, per_source_regex_cpu,
per_sourcetype_regex_cpu, per_index_regex_cpu.
* Default: false
[searchresults]
* This stanza controls search results for a variety of Splunk search commands. compression_level = <integer> * Compression level to use when writing search results to .csv.gz files. * Default: 1 maxresultrows = <integer> * Configures the maximum number of events are generated by search commands which grow the size of your result set (such as multikv) or that create events. Other search commands are explicitly controlled in specific stanzas below. * This limit should not exceed 50000. * Default: 50000 tocsv_maxretry = <integer> * Maximum number of times to retry the atomic write operation. * When set to “1”: Specifies that there will be no retries. * Default: 5 tocsv_retryperiod_ms = <integer> * Period of time to wait before each retry. * Default: 500 * These setting control logging of error messages to the info.csv file. All messages will be logged to the search.log file regardless of these settings.
[search_info]
* This stanza controls logging of messages to the info.csv file. * Messages logged to the info.csv file are available to REST API clients and Splunk Web. Limiting the messages added to info.csv will mean that these messages will not be available in the UI and/or the REST API. filteredindexes_log_level = [DEBUG|INFO|WARN|ERROR] * Log level of messages when search returns no results because user has no permissions to search on queried indexes. infocsv_log_level = [DEBUG|INFO|WARN|ERROR] * Limits the messages which are added to the info.csv file to the stated level and above. * For example, if “infocsv_log_level” is WARN, messages of type WARN and higher will be added to the info.csv file. max_infocsv_messages = <positive integer> * If more than max_infocsv_messages log entries are generated, additional entries will not be logged in the info.csv file. All entries will still be logged in the search.log file. show_warn_on_filtered_indexes = <boolean> * Log warnings if search returns no results because user has no permissions to search on queried indexes.
[subsearch]
* This stanza controls subsearch results. * NOTE: This stanza DOES NOT control subsearch results when a subsearch is called by commands such as join, append, or appendcols. * Read more about subsearches in the online documentation: http://docs.splunk.com/Documentation/Splunk/latest/Search/Aboutsubsearches maxout = <integer> * Maximum number of results to return from a subsearch. * This value cannot be greater than or equal to 10500. * Default: 10000 maxtime = <integer> * Maximum number of seconds to run a subsearch before finalizing * Default: 60 ttl = <integer> * The time to live (ttl), in seconds, of the cache for the results of a given subsearch. * Do not set this below 120 seconds. * See the definition in the [search] stanza under the “TTL” section for more details on how the ttl is computed. * Default: 300 (5 minutes)
SEARCH COMMAND
# This section contains the limitation settings for the search command. # The settings are organized by type of setting.
[search]
# The settings under the [search] stanza are organized by type of setting.
############################################################################
# Batch search
############################################################################
# This section contains settings for batch search.
allow_batch_mode = <bool>
* Specifies whether or not to allow the use of batch mode which searches
in disk based batches in a time insensitive manner.
* In distributed search environments, this setting is used on the search head.
* Default: true
batch_search_max_index_values = <int>
* When using batch mode, this limits the number of event entries read from the
index file. These entries are small, approximately 72 bytes. However batch
mode is more efficient when it can read more entries at one time.
* Setting this value to a smaller number can lead to slower search performance.
* A balance needs to be struck between more efficient searching in batch mode
* and running out of memory on the system with concurrently running searches.
* Default: 10000000
batch_search_max_pipeline = <int>
* Controls the number of search pipelines that are
launched at the indexer during batch search.
* Increasing the number of search pipelines should help improve search
performance, however there will be an increase in thread and memory usage.
* This setting applies only to searches that run on remote indexers.
* Default: 1
batch_search_max_results_aggregator_queue_size = <int>
* Controls the size, in MB, of the search results queue to which all
the search pipelines dump the processed search results.
* Increasing the size can lead to search performance gains.
Decreasing the size can reduce search performance.
* Do not specify zero for this setting.
* Default: 100
batch_search_max_serialized_results_queue_size = <int>
* Controls the size, in MB, of the serialized results queue from which
the serialized search results are transmitted.
* Increasing the size can lead to search performance gains.
Decreasing the size can reduce search performance.
* Do not specify zero for this setting.
* Default: 100
NOTE: The following batch search settings control the periodicity of retries
to search peers in the event of failure (Connection errors, and others).
The interval exists between failure and first retry, as well as
successive retries in the event of further failures.
batch_retry_min_interval = <int>
* When batch mode attempts to retry the search on a peer that failed,
specifies the minimum time, in seconds, to wait to retry the search.
* Default: 5
batch_retry_max_interval = <int>
* When batch mode attempts to retry the search on a peer that failed,
specifies the maximum time, in seconds, to wait to retry the search.
* Default: 300 (5 minutes)
batch_retry_scaling = <double>
* After a batch retry attempt fails, uses this scaling factor to increase
the time to wait before trying the search again.
* The value should be > 1.0.
* Default: 1.5
############################################################################
# Bundles
############################################################################
# This section contains settings for bundles and bundle replication.
load_remote_bundles = <bool>
* On a search peer, allow remote (search head) bundles to be loaded in splunkd.
* Default: false.
replication_file_ttl = <int>
* The time to live (ttl), in seconds, of bundle replication tarballs,
for example: *.bundle files.
* Default: 600 (10 minutes)
replication_period_sec = <int>
* The minimum amount of time, in seconds, between two successive bundle
replications.
* Default: 60
sync_bundle_replication = [0|1|auto]
* A flag that indicates whether configuration file replication blocks
searches or is run asynchronously.
* When set to “auto”: The Splunk software uses asynchronous
replication only if all of the peers support asynchronous bundle
replication.
Otherwise synchronous replication is used.
* Default: auto
############################################################################
# Concurrency
############################################################################
# This section contains settings for search concurrency limits.
base_max_searches = <int>
* A constant to add to the maximum number of searches, computed as a
multiplier of the CPUs.
* Default: 6
max_rt_search_multiplier = <decimal number>
* A number by which the maximum number of historical searches is multiplied
to determine the maximum number of concurrent real-time searches.
* Note: The maximum number of real-time searches is computed as:
max_rt_searches = max_rt_search_multiplier x max_hist_searches
* Default: 1
max_searches_per_cpu = <int>
* The maximum number of concurrent historical searches for each CPU.
The system-wide limit of historical searches is computed as:
max_hist_searches = max_searches_per_cpu x number_of_cpus + base_max_searches
* NOTE: The maximum number of real-time searches is computed as:
max_rt_searches = max_rt_search_multiplier x max_hist_searches
* Default: 1
############################################################################
# Distributed search
############################################################################
# This section contains settings for distributed search connection
# information.
addpeer_skew_limit = <positive integer>
* Absolute value of the largest time skew, in seconds, that is allowed when
configuring a search peer from a search head, independent of time.
* If the difference in time (skew) between the search head and the peer is
greater than “addpeer_skew_limit”, the search peer is not added.
* This is only relevant to manually added peers. This setting has no effect
on index cluster search peers.
* Default: 600 (10 minutes)
fetch_remote_search_log = [enabled|disabledSavedSearches|disabled]
* When set to “enabled”: All remote search logs are downloaded barring
the oneshot search.
* When set to “disabledSavedSearches”: Downloads all remote logs other
than saved search logs and oneshot search logs.
* When set to “disabled”: Irrespective of the search type, all remote
search log download functionality is disabled.
* NOTE:
* The previous values:[true|false] are still supported but not recommended.
* The previous value of “true” maps to the current value of “enabled”.
* The previous value of “false” maps to the current value of “disabled”.
* Default: disabledSavedSearches
max_chunk_queue_size = <int>
* The maximum size of the chunk queue.
* default: 10000000
max_combiner_memevents = <int>
* Maximum size of the in-memory buffer for the search results combiner.
The <int> is the number of events.
* Default: 50000
max_tolerable_skew = <positive integer>
* Absolute value of the largest timeskew, in seconds, that we will tolerate
between the native clock on the search head and the native clock on the peer
(independent of time-zone).
* If this time skew is exceeded, a warning is logged. This estimate is
approximate and tries to account for network delays.
* Default: 60
max_workers_searchparser = <int>
* The number of worker threads in processing search result when using round
robin policy.
* default: 5
results_queue_min_size = <integer>
* The minimum size, of search result chunks, that will be kept from peers
for processing on the search head before throttling the rate that data
is accepted.
* The minimum queue size in chunks is the “results_queue_min_size” value
and the number of peers providing results, which ever is greater.
* Default: 10
result_queue_max_size = <integer>
* The maximum size, in MB, that will be kept from peers for processing on
the search head before throttling the rate that data is accepted.
* The “results_queue_min_size” value takes precedence. The number of search
results chunks specified by “results_queue_min_size” will always be
retained in the queue even if the combined size in MB exceeds the
“result_queue_max_size” value.
* Default: 100
results_queue_read_timeout_sec = <integer>
* The amount of time, in seconds, to wait when the search executing on the
search head has not received new results from any of the peers.
* Cannot be less than the 'receiveTimeout' setting in the distsearch.conf
file.
* Default: 900
batch_wait_after_end = <int>
* DEPRECATED: Use the 'results_queue_read_timeout_sec' setting instead.
############################################################################
# Field stats
############################################################################
# This section contains settings for field statistics.
fieldstats_update_freq = <number>
* How often to update the field summary statistics, as a ratio to the elapsed
run time so far.
* Smaller values means update more frequently.
* When set to “0”: Specifies to update as frequently as possible.
* Default: 0
fieldstats_update_maxperiod = <number>
* The maximum period, in seconds, for updating field summary statistics.
* When set to “0”: Specifies that there is not maximum period. The period
is dictated by the calculation:
current_run_time x fieldstats_update_freq
* Fractional seconds are allowed.
* Default: 60
min_freq = <number>
* Minimum frequency of a field that is required for the field to be included
in the /summary endpoint.
* The frequency must be a fraction >=0 and <=1.
* Default: 0.01 (1%)
############################################################################
# History
############################################################################
# This section contains settings for search history.
enable_history = <bool>
* Specifies whether to keep a history of the searches that are run.
* Default: true
max_history_length = <int>
* Maximum number of searches to store in history for each user and application.
* Default: 1000
############################################################################
# Memory tracker
############################################################################
# This section contains settings for the memory tracker.
enable_memory_tracker = <bool>
* Specifies if the memory tracker is enabled.
* When set to “false” (disabled): The search is not terminated even if
the search exceeds the memory limit.
* When set to “true”: Enables the memory tracker.
* Must be set to “true” to enable the “search_process_memory_usage_threshold”
setting or the “search_process_memory_usage_percentage_threshold” setting.
* Default: false
search_process_memory_usage_threshold = <double>
* To use this setting, the “enable_memory_tracker” setting must be set
to “true”.
* Specifies the maximum memory, in MB, that the search process can consume
in RAM.
* Search processes that violate the threshold are terminated.
* If the value is set to 0, then search processes are allowed to grow
unbounded in terms of in memory usage.
* Default: 4000 (4GB)
search_process_memory_usage_percentage_threshold = <float>
* To use this setting, the “enable_memory_tracker” setting must be set
to “true”.
* Specifies the percent of the total memory that the search process is
entitled to consume.
* Search processes that violate the threshold percentage are terminated.
* If the value is set to zero, then splunk search processes are allowed to
grow unbounded in terms of percentage memory usage.
* Any setting larger than 100 or less than 0 is discarded and the default
value is used.
* Default: 25%
############################################################################
# Meta search
############################################################################
# This section contains settings for meta search.
allow_inexact_metasearch = <bool>
* Specifies if a metasearch that is inexact be allowed.
* When set to “true”: An INFO message is added to the inexact metasearches.
* When set to “false”: A fatal exception occurs at search parsing time.
* Default: false
indexed_as_exact_metasearch = <bool>
* Specifies if a metasearch can process <field>=<value> the same as
<field>::<value>, if <field> is an indexed field.
* When set to “true”: Allows a larger set of metasearches when the
“allow_inexact_metasearch” setting is “false”. However, some of the
metasearches might be inconsistent with the results of doing a normal
search.
* Default: false
############################################################################
# Misc
############################################################################
# This section contains miscellaneous search settings.
disk_usage_update_period = <number>
* Specifies how frequently, in seconds, should the search process estimate the
artifact disk usage.
* The quota for the amount of disk space that a search job can use is
controlled by the 'srchDiskQuota' setting in the authorize.conf file.
* Exceeding this quota causes the search to be auto-finalized immediately,
even if there are results that have not yet been returned.
* Fractional seconds are allowed.
* Default: 10
dispatch_dir_warning_size = <int>
* Specifies the number of jobs in the dispatch directory that triggers when
to issue a bulletin message. The message warns that performance might
be impacted.
* Default: 5000
do_not_use_summaries = <bool>
* Do not use this setting without working in tandem with Splunk support.
* This setting is a very narrow subset of “summary_mode=none”.
* When set to “true”: Disables some functionality that is necessary for
report acceleration.
* In particular, when set to “true”, search processes will no longer query
the main splunkd's /admin/summarization endpoint for report acceleration
summary IDs.
* In certain narrow use-cases this might improve performance if report
acceleration (savedsearches.conf:auto_summarize) is not in use, by lowering
the main splunkd's process overhead.
* Default: false
enable_datamodel_meval = <bool>
* Enable concatenation of successively occurring evals into a single
comma-separated eval during the generation of datamodel searches.
* default: true
force_saved_search_dispatch_as_user = <bool>
* Specifies whether to overwrite the “dispatchAs” value.
* When set to “true”: The “dispatchAs” value is overwritten by “user”
regardless of the [user|owner] value in the savedsearches.conf file.
* When set to “false”: The value in the savedsearches.conf file is used.
* You might want to set this to “true” to effectively disable
“dispatchAs = owner” for the entire install, if that more closely aligns
with security goals.
* Default: false
max_id_length = <integer>
* Maximum length of the custom search job ID when spawned by using
REST API argument “id”.
search_keepalive_frequency = <int>
* Specifies how often, in milliseconds, a keepalive is sent while a search is running.
* Default: 30000 (30 seconds)
search_keepalive_max = <int>
* The maximum number of uninterupted keepalives before the connection is closed.
* This counter is reset if the search returns results.
* Default: 100
search_retry = <bool>
* Specifies whether the Splunk software retries parts of a search within a
currently-running search processs when there are indexer failures in the
indexer clustering environment.
* Indexers can fail during rolling restart or indexer upgrade when indexer
clustering is enabled. Indexer reboots can also result in failures.
* This setting applies only to historical search in batch mode, real-time
search, and indexed real-time search.
* When set to true, the Splunk software attempts to rerun searches on indexer
cluster nodes that go down and come back up again. The search process on the
search head maintains state information about the indexers and buckets.
* NOTE: Search retry is on a best-effort basis, and it is possible
for Splunk software to return partial results for searches
without warning when you enable this setting.
* When set to false, the search process will stop returning results from a specific
indexer when that indexer undergoes a failure.
* Default: false
stack_size = <int>
* The stack size, in bytes, of the thread that executes the search.
* Default: 4194304 (4MB)
summary_mode = [all|only|none]
* Specifies if precomputed summary data are to be used.
* When set to “all”: Use summary data if possible, otherwise use raw data.
* When set to “only”: Use summary data if possible, otherwise do not use
any data.
* When set to “none”: Never use precomputed summary data.
* Default: all
track_indextime_range = <bool>
* Specifies if the system should track the _indextime range of returned
search results.
* Default: true
use_bloomfilter = <bool>
* Controls whether to use bloom filters to rule out buckets.
* Default: true
use_metadata_elimination = <bool>
* Control whether to use metadata to rule out buckets.
* Default: true
results_serial_format = [csv|srs]
* The internal format used for storing serialized results on disk.
* Options:
* csv: Comma-separated values format
* srs: Splunk binary format
* Default: srs
* NOTE: Do not change unless instructed to do so by Splunk Support.
results_compression_algorithm = [gzip|none]
* The compression algorithm used for storing serialized results on disk.
* Options:
* gzip: gzip
* none: No compression
* Default: gzip
* NOTE: Do not change unless instructed to do so by Splunk Support.
use_dispatchtmp_dir = <bool>
* DEPRECATED. This setting has been deprecated and has no effect.
auto_cancel_after_pause = <integer>
* Specifies the amount of time, in seconds, that a search must be paused before
the search is automatically cancelled.
* If set to 0, a paused search is never automatically cancelled.
* Default: 0
always_include_indexedfield_lispy = <bool>
* Controls if we should always search for a field that does not have
INDEXED=true set in fields.conf using both the indexed and non-indexed forms
* If true, when searching for <field>=<val>, we search the lexicon for both
<field>::<val> and <val>
* If false, when searching for <field>=<val>, we search the lexicon for only
<val>
* Set to true if you have fields that are sometimes indexed and sometimes not indexed. For field name that are always indexed, it is much better performance wise to set INDEXED=true in fields.conf for that field instead.
* Default: false
############################################################################
# Parsing
############################################################################
# This section contains settings related to parsing searches.
max_macro_depth = <int>
* Maximum recursion depth for macros. Specifies the maximum levels for macro
expansion.
* It is considered a search exception if macro expansion does not stop after
this many levels.
* Value must be greater than or equal to 1.
* Default: 100
max_subsearch_depth = <int>
* Maximum recursion depth for subsearches. Specifies the maximum levels for
subsearches.
* It is considered a search exception if a subsearch does not stop after
this many levels.
* Default: 8
min_prefix_len = <integer>
* The minimum length of a prefix before a wildcard (*) to use in the query
to the index.
* Default: 1
use_directives = <bool>
* Specifies whether a search can take directives and interpret them
into arguments.
* This is used in conjunction with the search optimizer in order to
improve search performance.
* Default: true
############################################################################
# Phased execution settings
############################################################################
# This section contains settings for multi-phased execution
phased_execution = <bool>
DEPRECATED This setting has been deprecated.
phased_execution_mode = [multithreaded|auto|singlethreaded]
* NOTE: Do not change this setting unless instructed to do so by Splunk Support!
* Controls whether searches use the multiple-phase method of search execution,
which is required for parallel reduce functionality as of Splunk Enterprise
7.1.0.
* When set to 'multithreaded' the Splunk platform uses the multiple-phase
search execution method. Allows usage of the 'redistribute' command.
* When set to 'auto', the Splunk platform uses the multiple-phase search
execution method when the 'redistribute' command is used in the search
string. If the 'redistribute' command is not present in the search string,
the single-phase search execution method is used.
* When set to 'singlethreaded' the Splunk platform uses the single-threaded
search execution method, which does not allow usage of the 'redistribute'
command.
* Default: multithreaded
############################################################################
# Preview
############################################################################
# This section contains settings for previews.
max_preview_period = <integer>
* The maximum time, in seconds, between previews.
* Used with the preview interval that is calculated with the
“preview_duty_cycle” setting.
* When set to “0”: Specifies unlimited time between previews.
* Default: 0
min_preview_period = <integer>
* The minimum time, in seconds, required between previews. When the calculated
interval using “preview_duty_cycle” indicates previews should be run
frequently. This setting is used to limit the frequency with which previews
run.
* Default: 1
preview_duty_cycle = <number>
* The maximum time to spend generating previews, as a fraction of the total
search time.
* Must be > 0.0 and < 1.0
* Default: 0.25
preview_freq = <timespan> or <ratio>
* Minimum amount of time between results preview updates.
* If specified as a number, between > 0 and < 1, the minimum time between
previews is computed as a ratio of the amount of time that the search
has been running, or as a ratio of the length of the time window for
real-time windowed searches.
* Default: a ratio of 0.05
############################################################################
# Quota or queued searches
############################################################################
# This section contains settings for quota or queued searches.
default_allow_queue = [0|1]
* Unless otherwise specified by using a REST API argument, specifies if an
asynchronous job spawning request should be queued on quota violation.
If not, an http error of server too busy is returned.
* Default: 1 (true)
dispatch_quota_retry = <integer>
* The maximum number of times to retry to dispatch a search when the quota has
been reached.
* Default: 4
dispatch_quota_sleep_ms = <integer>
* The time, in milliseconds, between retrying to dispatch a search when a
quota is reached.
* Retries the given number of times, with each successive wait 2x longer than
the previous wait time.
* Default: 100
enable_cumulative_quota = <bool>
* Specifies whether to enforce cumulative role based quotas.
* Default: false
queued_job_check_freq = <number>
* Frequency, in seconds, to check queued jobs to determine if the jobs can
be started.
* Fractional seconds are allowed.
* Default: 1.
############################################################################
# Reading chunk controls
############################################################################
# This section contains settings for reading chunk controls.
chunk_multiplier = <integer>
* A multiplier that the “max_results_perchunk”, “min_results_perchunk”, and
“target_time_perchunk” settings are multiplied by for a long running search.
* Default: 5
long_search_threshold = <integer>
* The time, in seconds, until a search is considered "long running".
* Default: 2
max_rawsize_perchunk = <integer>
* The maximum raw size, in bytes, of results for each call to search
(in dispatch).
* When set to “0”: Specifies that there is no size limit.
* This setting is not affected by the “chunk_multiplier” setting.
* Default: 100000000 (100MB)
max_results_perchunk = <integer>
* The maximum number of results to emit for each call to the preview data
generator.
* Default: 2500
max_results_perchunk = <integer>
* Maximum results for each call to search (in dispatch).
* Must be less than or equal to the “maxresultrows” setting.
* Default: 2500
min_results_perchunk = <integer>
* The minimum results for each call to search (in dispatch).
* Must be less than or equal to the “max_results_perchunk” setting.
* Default: 100
target_time_perchunk = <integer>
* The target duration, in milliseconds, of a particular call to fetch
search results.
* Default: 2000 (2 seconds)
############################################################################
# Real-time
############################################################################
# This section contains settings for real-time searches.
check_splunkd_period = <number>
* Amount of time, in seconds, that determines how frequently the search process
(when running a real-time search) checks whether the parent process
(splunkd) is running or not.
* Fractional seconds are allowed.
* Default: 60 (1 minute)
realtime_buffer = <int>
* Maximum number of accessible events to keep for real-time searches in
Splunk Web.
* Acts as circular buffer after this buffer limit is reached.
* Must be greater than or equal to 1.
* Default: 10000
############################################################################
# Remote storage
############################################################################
# This section contains settings for remote storage.
bucket_localize_acquire_lock_timeout_sec = <int>
* The maximum amount of time, in seconds, to wait when attempting to acquire a
lock for a localized bucket.
* When set to 0, waits indefinitely.
* This setting is only relevant when using remote storage.
* Default: 60 (1 minute)
bucket_localize_max_timeout_sec = <int>
* The maximum amount of time, in seconds, to spend localizing a bucket stored
in remote storage.
* If the bucket contents (what is required for the search) cannot be localized
in that timeframe, the bucket will not be searched.
* When set to “0”: Specifies an unlimited amount of time.
* This setting is only relevant when using remote storage.
* Default: 300 (5 minutes)
bucket_localize_status_check_period_ms = <int>
* The amount of time, in milliseconds, between consecutive status checks to see
if the needed bucket contents required by the search have been localized.
* This setting is only relevant when using remote storage.
* The minimum and maximum values are 10 and 60000, respectively. If the
specified value falls outside this range, it is effectively set to the
nearest value within the range. For example, if you set the value to
70000, the effective value will be 60000.
* Default: 500 (.5 seconds)
bucket_localize_max_lookahead = <int>
* Specifies the maximum number of buckets the search command localizes
for look-ahead purposes, in addition to the required bucket.
* Increasing this value can improve performance, at the cost of additional
network/io/disk utilization.
* Valid values are 0-64. Any value larger than 64 will be set to 64. Other
invalid values will be discarded and the default will be substituted.
* This setting is only relevant when using remote storage.
* Default: 5
bucket_localize_lookahead_priority_ratio = <int>
* A value of N means that lookahead localizations will occur only 1 out of N
search localizations, if any.
* Default: 5
bucket_predictor = [consec_not_needed|everything]
* Specifies which bucket file prediction algorithm to use.
* Do not change this unless you know what you are doing.
* Default: consec_not_needed
############################################################################
# Results storage
############################################################################
# This section contains settings for storing final search results.
max_count = <integer>
* The number of events that can be accessible in any given status bucket
(when status_buckets = 0).
* The last accessible event in a call that takes a base and count.
* Note: This value does not reflect the number of events displayed in the
UI after the search is evaluated or computed.
* Default: 500000
max_events_per_bucket = <integer>
* For searches with “status_buckets>0”, this setting limits the number of
events retrieved for each timeline bucket.
* Default: 1000 in code.
status_buckets = <integer>
* The approximate maximum number buckets to generate and maintain in the
timeline.
* Default: 0, which means do not generate timeline information
truncate_report = [1|0]
* Specifies whether or not to apply the “max_count” setting to report output.
* Default: 0 (false)
write_multifile_results_out = <bool>
* At the end of the search, if results are in multiple files, write out the
multiple files to the results_dir directory, under the search results
directory.
* This setting speeds up post-processing search, since the results will
already be split into appropriate size files.
* Default: true
############################################################################
# Search process
############################################################################
# This section contains settings for search process configurations.
idle_process_cache_search_count = <int>
* The number of searches that the search process must reach, before purging
older data from the cache. The purge is performed even if the
“idle_process_cache_timeout" has not been reached.
* When a search process is allowed to run more than one search, the search
process can cache some data between searches.
* When set to a negative value: No purge occurs, no matter how many
searches are run.
* Has no effect on Windows if “search_process_mode” is not ”auto"
or if “max_searches_per_process” is set to 0 or 1.
* Default: 8
idle_process_cache_timeout = <number>
* The amount of time, in seconds, that a search process must be idle before
the system purges some older data from these caches.
* When a search process is allowed to run more than one search, the search
process can cache some data between searches.
* When set to a negative value: No purge occurs, no matter on how long the
search process is idle.
* When set to “0”: Purging always occurs, regardless of whether the process
has been idle or not.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* Default: 0.5 (seconds)
idle_process_regex_cache_hiwater = <int>
* A threshold for the number of entries in the regex cache. If the regex cache
grows to larger than this number of entries, the systems attempts to
purge some of the older entries.
* When a search process is allowed to run more than one search, the search
process can cache compiled regex artifacts.
* Normally the "idle_process_cache_search count“ and the
“idle_process_cache_timeout” settings will keep the regex cache a
reasonable size. This setting is to prevent the cache from growing
extremely large during a single large search.
* When set to a negative value: No purge occurs, not matter how large
the cache.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* Default: 2500
idle_process_reaper_period = <number>
* The amount of time, in seconds, between checks to determine if there are
too many idle search processes.
* When a search process is allowed to run more than one search, the system
checks if there are too many idle search processes.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* Default: 30
launcher_max_idle_checks = <int>
* Specifies the number of idle processes that are inspected before giving up
and starting a new search process.
* When allowing more than one search to run for each process, the system
attempts to find an appropriate idle process to use.
* When set to a negative value: Every eligible idle process is inspected.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* Default: 5
launcher_threads = <int>
* The number of server thread to run to manage the search processes.
* Valid only when more than one search is allowed to run for each process.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* Default: -1 (a value is selected automatically)
max_old_bundle_idle_time = <number>
* The amount of time, in seconds, that a process bundle must be idle before
the process bundle is considered for reaping.
* Used when reaping idle search processes and the process is not configured
with the most recent configuration bundle.
* When set to a negative value: The idle processes are not reaped sooner
than normal if the processes are using an older configuration bundle.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* Default: 5
max_searches_per_process = <int>
* On UNIX, specifies the maximum number of searches that each search process
can run before exiting.
* After a search completes, the search process can wait for another search to
start and the search process can be reused.
* When set to “0” or “1”: The process is never reused.
* When set to a negative value: There is no limit to the number of searches
that a process can run.
* Has no effect on Windows if search_process_mode is not "auto”.
* Default: 500
max_time_per_process = <number>
* Specifies the maximum time, in seconds, that a process can spend running
searches.
* When a search process is allowed to run more than one search, limits how
much time a process can accumulate running searches before the process
must exit.
* When set to a negative value: There is no limit on the amount of time a
search process can spend running.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* NOTE: A search can run longer than the value set for “max_time_per_process”
without being terminated. This setting ONLY prevents the process from
being used to run additional searches after the maximum time is reached.
* Default: 300 (5 minutes)
process_max_age = <number>
* Specifies the maximum age, in seconds, for a search process.
* When a search process is allowed to run more than one search, a process
is not reused if the process is older than the value specified.
* When set to a negative value: There is no limit on the the age of the
search process.
* This setting includes the time that the process spends idle, which is
different than "max_time_per_process" setting.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* NOTE: A search can run longer than the the time set for “process_max_age”
without being terminated. This setting ONLY prevents that process from
being used to run more searches after the search completes.
* Default: 7200 (120 minutes or 2 hours)
process_min_age_before_user_change = <number>
* The minimum age, in seconds, of an idle process before using a process
from a different user.
* When a search process is allowed to run more than one search, the system
tries to reuse an idle process that last ran a search by the same Splunk
user.
* If no such idle process exists, the system tries to use an idle process
from a different user. The idle process from a different user must be
idle for at least the value specified for the
“process_min_age_before_user_change” setting.
* When set to “0”: Any idle process by any Splunk user can be reused.
* When set to a negative value: Only a search process by same Splunk user
can be reused.
* Has no effect on Windows if “search_process_mode” is not "auto" or
if “max_searches_per_process” is set to 0 or 1.
* Default: 4
search_process_mode = [auto|traditional|debug <debugging-command> <debugging-args>]
* Controls how search processes are started.
* When set to “traditional”: Each search process is initialized completely
from scratch.
* When set to “debug”: When set to a string beginning with "debug",
searches are routed through the <debugging-command>, where the user can
"plug in" debugging tools.
* The <debugging-command> must reside in one of the following locations:
* $SPLUNK_HOME/etc/system/bin/
* $SPLUNK_HOME/etc/apps/$YOUR_APP/bin/
* $SPLUNK_HOME/bin/scripts/
* The <debugging-args> are passed, followed by the search command it
would normally run, to <debugging-command>
* For example, given the following setting:
search_process_mode = debug $SPLUNK_HOME/bin/scripts/search-debugger.sh 5
A command similar to the following is run:
$SPLUNK_HOME/bin/scripts/search-debugger.sh 5 splunkd search --id=... --maxbuckets=... --ttl=... [...]
* Default: auto
############################################################################
# Search reuse
############################################################################
# This section contains settings for search reuse.
allow_reuse = <bool>
* Specifies whether to allow normally executed historical searches to be
implicitly re-used for newer requests if the newer request allows it.
* Default: true
reuse_map_maxsize = <int>
* Maximum number of jobs to store in the reuse map.
* Default: 1000
############################################################################
# Splunk Analytics for Hadoop
############################################################################
# This section contains settings for use with Splunk Analytics for Hadoop.
reduce_duty_cycle = <number>
* The maximum time to spend performing the reduce, as a fraction of total
search time.
* Must be > 0.0 and < 1.0.
* Default: 0.25
reduce_freq = <integer>
* When the specified number of chunks is reached, attempt to reduce
the intermediate results.
* When set to “0”: Specifies that there is never an attempt to reduce the
intermediate result.
* Default: 10
remote_reduce_limit = <unsigned long>
* The number of results processed by a streaming search before a reduce
is forced.
* NOTE: this option applies only if the search is run with --runReduce=true
(currently only Splunk Analytics for Hadoop does this)
* When set to “0”: Specifies that there is no limit.
* Default: 1000000
unified_search = <bool>
* Specifies if unified search is turned on for hunk archiving.
* Default: false
############################################################################
# Status
############################################################################
# This section contains settings for search status.
status_cache_size = <int>
* The number of status data for search jobs that splunkd can cache in RAM.
This cache improves performance of the jobs endpoint.
* Default: 10000
status_period_ms = <int>
* The minimum amount of time, in milliseconds, between successive
status/info.csv file updates.
* This setting ensures that search does not spend significant time just
updating these files.
* This is typically important for very large number of search peers.
* It could also be important for extremely rapid responses from search
peers, when the search peers have very little work to do.
* Default: 1000 (1 second)
############################################################################
# Timelines
############################################################################
# This section contains settings for timelines.
remote_event_download_finalize_pool = <int>
* Size of the pool, in threads, responsible for writing out the full remote events.
* Default: 5
remote_event_download_initialize_pool = <int>
* Size of the pool, in threads, responsible for initiating the remote event fetch.
* Default: 5
remote_event_download_local_pool = <int>
* Size of the pool, in threads, responsible for reading full local events.
* Default: 5
remote_timeline = [0|1]
* Specifies if the timeline can be computed remotely to enable better
map/reduce scalability.
* Default: 1 (true)
remote_timeline_connection_timeout = <int>
* Connection timeout, in seconds, for fetching events processed by remote
peer timeliner.
* Default: 5.
remote_timeline_fetchall = [0|1]
* When set to “1” (true): Splunk fetches all events accessible through the
timeline from the remote peers before the job is considered done.
* Fetching of all events might delay the finalization of some searches,
typically those running in verbose mode from the main Search view in
Splunk Web.
* This potential performance impact can be mitigated by lowering the
“max_events_per_bucket” settings.
* When set to “0” (false): The search peers might not ship all matching
events to the search head, particularly if there is a very large number of them.
* Skipping the complete fetching of events back to the search head will
result in prompt search finalization.
* Some events may not be available to browse in the UI.
* This setting does NOT affect the accuracy of search results computed by
reporting searches.
* Default: 1 (true)
remote_timeline_max_count = <int>
* Maximum number of events to be stored per timeline bucket on each search
peer.
* Default: 10000
remote_timeline_max_size_mb = <int>
* Maximum size of disk, in MB, that remote timeline events should take
on each peer.
* If the limit is reached, a DEBUG message is emitted and should be
visible in the job inspector or in messages.
* Default: 100
remote_timeline_min_peers = <int>
* Minimum number of search peers for enabling remote computation of
timelines.
* Default: 1
remote_timeline_parallel_fetch = <bool>
* Specifies whether to connect to multiple peers at the same time when
fetching remote events.
* Default: true
remote_timeline_prefetch = <int>
* Specifies the maximum number of full eventuate that each peer should
proactively send at the beginning.
* Default: 100
remote_timeline_receive_timeout = <int>
* Receive timeout, in seconds, for fetching events processed by remote peer
timeliner.
* Default: 10
remote_timeline_send_timeout = <int>
* Send timeout, in seconds, for fetching events processed by remote peer
timeliner.
* Default: 10
remote_timeline_thread = [0|1]
* Specifies whether to use a separate thread to read the full events from
remote peers if “remote_timeline” is used and “remote_timeline_fetchall”
is set to “true”.
Has no effect if “remote_timeline” or “remote_timeline_fetchall” is set to
“false”.
* Default: 1 (true)
remote_timeline_touchperiod = <number>
* How often, in seconds, while a search is running to touch remote timeline
artifacts to keep the artifacts from being deleted by the remote peer.
* When set to “0”: The remote timelines are never touched.
* Fractional seconds are allowed.
* Default: 300 (5 minutes)
timeline_events_preview = <bool>
* When set to “true”: Display events in the Search app as the events are
scanned, including events that are in-memory and not yet committed, instead
of waiting until all of the events are scanned to see the search results.
You will not be able to expand the event information in the event viewer
until events are committed.
* When set to “false”: Events are displayed only after the events are
committed (the events are written to the disk).
* This setting might increase disk usage to temporarily save uncommitted
events while the search is running. Additionally, search performance might
be impacted.
* Default: false
timeline_freq = <timespan> or <ratio>
* The minimum amount of time, in seconds, between timeline commits.
* If specified as a number < 1 (and > 0), minimum time between commits is
computed as a ratio of the amount of time that the search has been running.
* Default: 0
TTL
# This section contains time to live (ttl) settings. cache_ttl = <integer> * The length of time, in seconds, to persist search cache entries. * Default: 300 (5 minutes) default_save_ttl = <integer> * How long, in seconds, the ttl for a search artifact should be extended in response to the save control action. * When set to 0, the system waits indefinitely. * Default: 604800 (1 week) failed_job_ttl = <integer> * How long, in seconds, the search artifacts should be stored on disk after a job has failed. The ttl is computed relative to the modtime of the status.csv file of the job, if the file exists, or the modtime of the artifact directory for the search job. * If a job is being actively viewed in the Splunk UI then the modtime of the status.csv file is constantly updated such that the reaper does not remove the job from underneath. * Default: 86400 (24 hours) remote_ttl = <integer> * How long, in seconds, the search artifacts from searches run in behalf of a search head should be stored on the indexer after completion. * Default: 600 (10 minutes) ttl = <integer> * How long, in seconds, the search artifacts should be stored on disk after the job completes. The ttl is computed relative to the modtime of the status.csv file of the job, if the file exists, or the modtime of the artifact directory for the search job. * If a job is being actively viewed in the Splunk UI then the modtime of the status.csv file is constantly updated such that the reaper does not remove the job from underneath. * Default: 600 (10 minutes) check_search_marker_done_interval = <integer> * The amount of time, in seconds, that elapses between checks of search marker files, such as hot bucket markers and backfill complete markers. * This setting is used to identify when the remote search process on the indexer completes processing all hot bucket and backfill portions of the search. * Default: 60 check_search_marker_sleep_interval = <integer> * The amount of time, in seconds, that the process will sleep between subsequent search marker file checks. * This setting is used to put the process into sleep mode periodically on the indexer, then wake up and check whether hot buckets and backfill portions of the search are complete. * Default: 1 srtemp_dir_ttl = <integer> * The time to live, in seconds, for the temporary files and directories within the intermediate search results directory tree. * These files and directories are located in $SPLUNK_HOME/var/run/splunk/srtemp. * Every 'srtemp_dir_ttl' seconds, the reaper removes files and directories within this tree to reclaim disk space. * The reaper measures the time to live through the newest file modification time within the directory. * When set to 0, the reaper does not remove any files or directories in this tree. * Default: 86400 (24 hours) ############################################################################ # Unsupported settings ############################################################################ # This section contains settings that are no longer supported. enable_status_cache = <bool> * This is not a user tunable setting. Do not use this setting without working in tandem with Splunk personnel. This setting is not tested at non-default. * This controls whether the status cache is used, which caches information about search jobs (and job artifacts) in memory in main splunkd. * Normally this cacheing is enabled and assists performance. However, when using Search Head Pooling, artifacts in the shared storage location will be changed by other search heads, so this cacheing is disabled. * Explicit requests to jobs endpoints , eg /services/search/jobs/<sid> are always satisfied from disk, regardless of this setting. * Defaults to true; except in Search Head Pooling environments where it defaults to false. status_cache_in_memory_ttl = <positive integer> * This is not a user tunable setting. Do not use this setting without working in tandem with Splunk personnel. This setting is not tested at non-default. * This setting has no effect unless search head pooling is enabled, AND enable_status_cache has been set to true. * If set, controls the number of milliseconds which a status cache entry may be used before it expires. * Defaults to 60000, or 60 seconds. ############################################################################ # Unused settings ############################################################################ # This section contains settings that have been deprecated. These settings # remain listed in this file for backwards compatibility. max_bucket_bytes = <integer> * This setting has been deprecated and has no effect. rr_min_sleep_ms = <int> * REMOVED. This setting is no longer used. rr_max_sleep_ms = <int> * REMOVED. This setting is no longer used. rr_sleep_factor = <int> * REMOVED. This setting is no longer used.
OTHER COMMAND SETTINGS
# This section contains the stanzas for the SPL commands, except for the # search command, which is in separate section.
[anomalousvalue]
maxresultrows = <integer> * Configures the maximum number of events that can be present in memory at one time. * Default: searchresults::maxresultsrows (which is by default 50000) maxvalues = <integer> * Maximum number of distinct values for a field. * Default: 100000 maxvaluesize = <integer> * Maximum size, in bytes, of any single value (truncated to this size if larger). * Default: 1000
[associate]
maxfields = <integer> * Maximum number of fields to analyze. * Default: 10000 maxvalues = <integer> * Maximum number of values for any field to keep track of. * Default: 10000 maxvaluesize = <integer> * Maximum length of a single value to consider. * Default: 1000
[autoregress]
maxp = <integer> * Maximum number of events for auto regression. * Default: 10000 maxrange = <integer> * Maximum magnitude of range for p values when given a range. * Default: 1000
[concurrency]
batch_search_max_pipeline = <int> * Controls the number of search pipelines launched at the indexer during batch search. * Increasing the number of search pipelines should help improve search performance but there will be an increase in thread and memory usage. * This value applies only to searches that run on remote indexers. * Default: 1 max_count = <integer> * Maximum number of detected concurrencies. * Default: 10000000
[correlate]
maxfields = <integer> * Maximum number of fields to correlate. * Default: 1000
[ctable]
* This stanza controls settings for the contingency command. * Aliases for the contingency command are: ctable and counttable. maxvalues = <integer> * Maximum number of columns/rows to generate (the maximum number of distinct values for the row field and column field). * Default: 1000
[discretize]
* This stanza contains the settings for the bin command. * Aliases for the bin command are: bucket and discretize. default_time_bins = <integer> * When discretizing time for timechart or explicitly via bin, the default bins to use if no span or bins is specified. * Default: 100 maxbins = <integer> * Maximum number of bins to discretize into. * If maxbins is not specified or = 0, it defaults to searchresults::maxresultrows * Default: 50000
[findkeywords]
maxevents = <integer> * Maximum number of events used by the findkeywords command and the Patterns tab. * Default: 50000
[geomfilter]
enable_clipping = <boolean> * Whether or not polygons are clipped to the viewport provided by the render client. * Default: true enable_generalization = <boolean> * Whether or not generalization is applied to polygon boundaries to reduce point count for rendering. * Default: true
[geostats]
filterstrategy = <integer> * Controls the selection strategy on the geoviz map. * Valid values are 1 and 2. maxzoomlevel = <integer> * Controls the number of zoom levels that geostats will cluster events on. zl_0_gridcell_latspan = <float> * Controls what is the grid spacing in terms of latitude degrees at the lowest zoom level, which is zoom-level 0. * Grid-spacing at other zoom levels are auto created from this value by reducing by a factor of 2 at each zoom-level. zl_0_gridcell_longspan = <float> * Controls what is the grid spacing in terms of longitude degrees at the lowest zoom level, which is zoom-level 0 * Grid-spacing at other zoom levels are auto created from this value by reducing by a factor of 2 at each zoom-level.
[inputcsv]
mkdir_max_retries = <integer> * Maximum number of retries for creating a tmp directory (with random name as subdir of SPLUNK_HOME/var/run/splunk) * Default: 100
[iplocation]
db_path = <path> * The absolute path to the GeoIP database in the MMDB format. * The “db_path” setting does not support standard Splunk environment variables such as SPLUNK_HOME. * Default: The database that is included with the Splunk platform.
[join]
subsearch_maxout = <integer> * Maximum result rows in output from subsearch to join against. * Default: 50000 subsearch_maxtime = <integer> * Maximum search time, in seconds, before auto-finalization of subsearch. * Default: 60 subsearch_timeout = <integer> * Maximum time, in seconds, to wait for subsearch to fully finish. * Default: 120
[kmeans]
maxdatapoints = <integer> * Maximum data points to do kmeans clusterings for. * Default: 100000000 (100 million) maxkrange = <integer> * Maximum number of k values to iterate over when specifying a range. * Default: 100 maxkvalue = <integer> * Maximum number of clusters to attempt to solve for. * Default: 1000
[lookup]
batch_index_query = <bool> * Should non-memory file lookups (files that are too large) use batched queries to possibly improve performance? * Default: true batch_response_limit = <integer> * When doing batch requests, the maximum number of matches to retrieve if more than this limit of matches would otherwise be retrieve, we will fall back to non-batch mode matching * Default: 5000000 max_lookup_messages = <positive integer> * If more than "max_lookup_messages" log entries are generated, additional entries will not be logged in info.csv. All entries will still be logged in search.log. max_matches = <integer> * Maximum matches for a lookup. * Valid values range from 1 - 1000. * Default: 1000 max_memtable_bytes = <integer> * Maximum size, in bytes, of static lookup file to use an in-memory index for. * Lookup files with size above max_memtable_bytes will be indexed on disk * A large value results in loading large lookup files in memory leading to bigger process memory footprint. * Caution must be exercised when setting this parameter to arbitrarily high values! * Default: 10000000 (10MB) max_reverse_matches = <integer> * maximum reverse lookup matches (for search expansion) * Default: 50
[metadata]
bucket_localize_max_lookahead = <int> * This setting is only relevant when using remote storage. * Specifies the maximum number of buckets the metadata command localizes for look-ahead purposes, in addition to the required bucket. * Increasing this value can improve performance, at the cost of additional network/io/disk utilization. * Valid values are 0-64. Any value larger than 64 will be set to 64. Other invalid values will be discarded and the default will be substituted. * Default: 10 maxcount = <integer> * The total number of metadata search results returned by the search head; after the maxcount is reached, any additional metadata results received from the search peers will be ignored (not returned). * A larger number incurs additional memory usage on the search head. * Default: 100000 maxresultrows = <integer> * The maximum number of results in a single chunk fetched by the metadata command * A smaller value will require less memory on the search head in setups with large number of peers and many metadata results, though, setting this too small will decrease the search performance. * NOTE: Do not change unless instructed to do so by Splunk Support. * Default: 10000
[mvexpand]
* This stanza allows for fine tuning of mvexpand search command. max_mem_usage_mb = <non-negative integer> * Overrides the default value for “max_mem_usage_mb”. * Limits the amount of RAM, in megabytes (MB), a batch of events or results will use in the memory of a search process. * See definition in the [default] stanza for “max_mem_usage_mb” for more details. * Default: 500
[mvcombine]
* This stanza allows for fine tuning of mvcombine search command. max_mem_usage_mb = <non-negative integer> * Overrides the default value for “max_mem_usage_mb” * Limits the amount of RAM, in megabytes (MB), a batch of events or results will use in the memory of a search process. * See definition in the [default] stanza for “max_mem_usage_mb” for more details. * Default: 500
[outputlookup]
outputlookup_check_permission = <bool> * Specifies whether the outputlookup command should verify that users have write permissions to CSV lookup table files. * outputlookup_check_permission is used in conjunction with the transforms.conf setting check_permission. * The system only applies outputlookup_check_permission to .csv lookup configurations in transforms.conf that have check_permission=true. * You can set lookup table file permissions in the .meta file for each lookup file, or through the Lookup Table Files page in Settings. By default, only users who have the admin or power role can write to a shared CSV lookup file. * Default: false
[rare]
maxresultrows = <integer> * Maximum number of result rows to create. * If not specified, defaults to searchresults::maxresultrows * Default: 50000 maxvalues = <integer> * Maximum number of distinct field vector values to keep track of. * Default: 100000 maxvaluesize = <integer> * Maximum length of a single value to consider. * Default: 1000
[set]
maxresultrows = <integer> * The maximum number of results the set command will use from each result set to compute the required set operation. * Default: 50000
[sort]
maxfiles = <integer> * Maximum files to open at once. Multiple passes are made if the number of result chunks exceeds this threshold. * Default: 64.
[spath]
extract_all = <boolean> * Controls whether we respect automatic field extraction when spath is invoked manually. * If true, we extract all fields regardless of settings. If false, we only extract fields used by later search commands. * Default: true extraction_cutoff = <integer> * For extract-all spath extraction mode, only apply extraction to the first <integer> number of bytes. * Default: 5000
[stats|sistats]
approx_dc_threshold = <integer>
* When using approximate distinct count (i.e. estdc(<field>) in
stats/chart/timechart), do not use approximated results if the actual number
of distinct values is less than this number
* Default: 1000
dc_digest_bits = <integer>
* 2^<integer> bytes will be size of digest used for approximating distinct
count.
* Must be >= 8 (128B) and <= 16 (64KB)
* Default: 10 (equivalent to 1KB)
default_partitions = <int>
* Number of partitions to split incoming data into for parallel/multithreaded reduce
* Default: 1
list_maxsize = <int>
* Maximum number of list items to emit when using the list() function
stats/sistats
* Default: 100
maxmem_check_freq = <integer>
* How frequently, in rows, to check to see if we are exceeding the in
memory data structure size limit as specified by “max_mem_usage_mb”.
* Default: 50000
maxresultrows = <integer>
* Maximum number of rows allowed in the process memory.
* When the search process exceeds “max_mem_usage_mb” and “maxresultrows”,
data is spilled out to the disk.
* If not specified, defaults to searchresults::maxresultrows
* Default: 50000
max_stream_window = <integer>
* For the streamstats command, the maximum allow window size.
* Default: 10000
maxvalues = <integer>
* Maximum number of values for any field to keep track of.
* When set to “0”: Specifies an unlimited number of values.
* Default: 0
maxvaluesize = <integer>
* Maximum length of a single value to consider.
* When set to “0”: Specifies an unlimited number of values.
* Default: 0
max_valuemap_bytes = <integer>
* For the sistats command, the maximum encoded length of the valuemap,
per result written out.
* If limit is exceeded, extra result rows are written out as needed.
* 0 = no limit per row
* Default: 100000
natural_sort_output = <bool>
* Do a natural sort on the output of stats if output size is <= maxresultrows
* Natural sort means that we sort numbers numerically and non-numbers
lexicographically
* Default: true
partitions_limit = <int>
* Maximum number of partitions to split into that can be specified via the
'partitions' option.
* When exceeded, the number of partitions is reduced to this limit.
* Default: 100
perc_method = nearest-rank|interpolated
* Which method to use for computing percentiles (and medians=50 percentile).
* nearest-rank picks the number with 0-based rank R =
floor((percentile/100)*count)
* interpolated means given F = (percentile/100)*(count-1),
pick ranks R1 = floor(F) and R2 = ceiling(F).
Answer = (R2 * (F - R1)) + (R1 * (1 - (F - R1)))
* See wikipedia percentile entries on nearest rank and "alternative methods"
* Default: nearest-rank
perc_digest_type = rdigest|tdigest
* Which digest algorithm to use for computing percentiles
( and medians=50 percentile).
* rdigest picks the rdigest_k, rdigest_maxnodes and perc_method properties.
* tdigest picks the tdigest_k and tdigest_max_buffer_size properties.
* Default: tdigest
sparkline_maxsize = <int>
* Maximum number of elements to emit for a sparkline
* Default: The value of the “list_maxsize” setting
sparkline_time_steps = <time-step-string>
* Specify a set of time steps in order of decreasing granularity. Use an
integer and one of the following time units to indicate each step.
* s = seconds
* m = minutes
* h = hours
* d = days
* month
* A time step from this list is selected based on the <sparkline_maxsize> setting.
* The lowest <sparkline_time_steps> value that does not exceed the maximum number
* of bins is used.
* Example:
* If you have the following configurations:
* <sparkline_time_steps> = 1s,5s,10s,30s,1m,5m,10m,30m,1h,1d,1month
* <sparkline_maxsize> = 100
* The timespan for 7 days of data is 604,800 seconds.
* Span = 604,800/<sparkline_maxsize>.
* If sparkline_maxsize = 100, then
span = (604,800 / 100) = 60,480 sec == 1.68 hours.
* The "1d" time step is used because it is the lowest value that does not exceed
* the maximum number of bins.
* Default: 1s,5s,10s,30s,1m,5m,10m,30m,1h,1d,1month
NOTE: The following are rdigest and tdigest settings.
rdigest is a data structure used to compute approximate order statistics
(such as median and percentiles) using sublinear space.
rdigest_k = <integer>
* rdigest compression factor
* Lower values mean more compression
* After compression, number of nodes guaranteed to be greater than or equal to
11 times k.
* Must be greater than or equal to 2.
* Default: 100
rdigest_maxnodes = <integer>
* Maximum rdigest nodes before automatic compression is triggered.
* When set to “1”: Specifies to automatically configure based on k value.
* Default: 1
tdigest_k = <integer>
* tdigest compression factor
* Higher values mean less compression, more mem usage, but better accuracy.
* Must be greater than or equal to 1.
* Default: 50
tdigest_max_buffer_size = <integer>
* Maximum number of elements before automatic reallocation of buffer storage is triggered.
* Smaller values result in less memory usage but is slower.
* Very small values (<100) are not recommended as they will be very slow.
* Larger values help performance up to a point after which it actually hurts performance.
* Recommended range is around 10tdigest_k to 30tdigest_k.
* Default: 1000
[top]
maxresultrows = <integer> * Maximum number of result rows to create. * If not specified, defaults to searchresults::maxresultrows. * Default: 50000 maxvalues = <integer> * Maximum number of distinct field vector values to keep track of. * Default: 100000 maxvaluesize = <integer> * Maximum length of a single value to consider. * Default: 1000
[transactions]
maxopentxn = <integer> * Specifies the maximum number of not yet closed transactions to keep in the open pool before starting to evict transactions. * Default: 5000 maxopenevents = <integer> * Specifies the maximum number of events (which are) part of open transactions before transaction eviction starts happening, using LRU policy. * Default: 100000
[tscollect]
squashcase = <boolean> * The default value of the 'squashcase' argument if not specified by the command * Default: false keepresults = <boolean> * The default value of the 'keepresults' argument if not specified by the command * Default: false optimize_max_size_mb = <unsigned int> * The maximum size in megabytes of files to create with optimize * Specify 0 for no limit (may create very large tsidx files) * Default: 1024
[tstats]
allow_old_summaries = <boolean>
* The default value of 'allow_old_summaries' arg if not specified by the
command
* When running tstats on an accelerated datamodel, allow_old_summaries=false
ensures we check that the datamodel search in each bucket's summary metadata
is considered up to date with the current datamodel search. Only summaries
that are considered up to date will be used to deliver results.
* The allow_old_summaries=true attribute overrides this behavior and will deliver results
even from bucket summaries that are considered out of date with the current
datamodel.
* Default: false
apply_search_filter = <boolean>
* Controls whether we apply role-based search filters when users run tstats on
normal index data
* Note: we never apply search filters to data collected with tscollect or
datamodel acceleration
* Default: true
bucket_localize_max_lookahead = <int>
* This setting is only relevant when using remote storage.
* Specifies the maximum number of buckets the tstats command localizes for
look-ahead purposes, in addition to the required bucket.
* Increasing this value can improve performance, at the cost of additional
network/io/disk utilization.
* Valid values are 0-64. Any value larger than 64 will be set to 64. Other
invalid values will be discarded and the default will be substituted.
* Default: 10
chunk_size = <unsigned int>
* ADVANCED: The default value of 'chunk_size' arg if not specified by
the command
* This argument controls how many events are retrieved at a time within a
single TSIDX file when answering queries
* Consider lowering this value if tstats queries are using too much memory
(cannot be set lower than 10000)
* Larger values will tend to cause more memory to be used (per search) and
might have performance benefits.
* Smaller values will tend to reduce performance and might reduce memory used
(per search).
* Altering this value without careful measurement is not advised.
* Default: 10000000
summariesonly = <boolean>
* The default value of 'summariesonly' arg if not specified by the command
* When running tstats on an accelerated datamodel, summariesonly=false implies
a mixed mode where we will fall back to search for missing TSIDX data
* summariesonly=true overrides this mixed mode to only generate results from
TSIDX data, which may be incomplete
* Default: false
warn_on_missing_summaries = <boolean>
* ADVANCED: Only meant for debugging summariesonly=true searches on
accelerated datamodels.
* When true, search will issue a warning for a tstats summariesonly=true
search for the following scenarios:
a) If there is a non-hot bucket that has no corresponding datamodel
acceleration summary whatsoever.
b) If the bucket's summary does not match with the current datamodel
acceleration search.
* Default: false
[typeahead]
cache_ttl_sec = <integer> * How long, in seconds, the typeahead cached results are valid. * Default 300 fetch_multiplier = <integer> * A multiplying factor that determines the number of terms to fetch from the index, fetch = fetch_multiplier x count. * Default: 50 max_concurrent_per_user = <integer> * The maximum number of concurrent typeahead searches per user. Once this maximum is reached only cached typeahead results might be available * Default: 3 maxcount = <integer> * Maximum number of typeahead results to find. * Default: 1000 min_prefix_length = <integer> * The minimum length of the string prefix after which to provide typeahead. * Default: 1 use_cache = [0|1] * Specifies whether the typeahead cache will be used if use_cache is not specified in the command line or endpoint. * Default: true or 1
[typer]
maxlen = <int> * In eventtyping, pay attention to first <int> characters of any attribute (such as _raw), including individual tokens. Can be overridden by supplying the typer operator with the argument maxlen (for example, "|typer maxlen=300"). * Default: 10000
[xyseries]
* This stanza allows for fine tuning of xyseries search command. max_mem_usage_mb = <non-negative integer> * Overrides the default value for “max_mem_usage_mb” * See definition in [default] max_mem_usage_mb for more details
GENERAL SETTINGS
# This section contains the stanzas for a variety of general settings.
[authtokens]
expiration_time = <integer> * Expiration time, in seconds, of auth tokens. * Default: 3600 (60 minutes)
[auto_summarizer]
allow_event_summarization = <bool>
* Whether auto summarization of searches whose remote part returns events
rather than results will be allowed.
* Default: false
cache_timeout = <integer>
* The minimum amount of time, in seconds, to cache auto summary details and search hash codes.
* The cached entry expires randomly between cache_timeout and 2*cache_timeout value.
* Default: 600 (10 minutes)
detailed_dashboard = <bool>
* Turn on/off the display of both normalized and regular summaries in the
Report Acceleration summary dashboard and details.
* Default: false
maintenance_period = <integer>
* The period of time, in seconds, that the auto summarization maintenance
happens
* Default: 1800 (30 minutes)
max_run_stats = <int>
* Maximum number of summarization run statistics to keep track and expose via
REST.
* Default: 48
max_verify_buckets = <int>
* When verifying buckets, stop after verifying this many buckets if no failures
have been found
* 0 means never
* Default: 100
max_verify_bucket_time = <int>
* Maximum time, in seconds, to spend verifying each bucket.
* Default: 15
max_verify_ratio = <number>
* Maximum fraction of data in each bucket to verify
* Default: 0.1 (10%)
max_verify_total_time = <int>
* Maximum total time in seconds to spend doing verification, regardless if any
buckets have failed or not
* When set to “0”: Specifies no limit.
* Default: 0
normalized_summaries = <bool>
* Turn on/off normalization of report acceleration summaries.
* Default: true
return_actions_with_normalized_ids = [yes|no|fromcontext]
* Report acceleration summaries are stored under a signature/hash which can be
regular or normalized.
* Normalization improves the re-use of pre-built summaries but is not
supported before 5.0. This config will determine the default value of how
normalization works (regular/normalized)
* When set to ”fromcontext”: Specifies that the end points and summaries
would be operating based on context.
* Normalization strategy can also be changed via admin/summarization REST calls
with the "use_normalization" parameter which can take the values
"yes"/"no"/"fromcontext"
* Default: fromcontext
search_2_hash_cache_timeout = <integer>
* The amount of time, in seconds, to cache search hash codes
* Default: The value of the “cache_timeout” setting, which by default is 600 (10 minutes)
shc_accurate_access_counts = <bool>
* Only relevant if you are using search head clustering
* Turn on/off to make acceleration summary access counts accurate on the
captain.
* by centralizing
verify_delete = <bool>
* Should summaries that fail verification be automatically deleted?
* Default: false
[export]
add_offset = <bool> * Add an offset/row number to JSON streaming output * Default: true add_timestamp = <bool> * Add a epoch time timestamp to JSON streaming output that reflects the time the results were generated/retrieved * Default: false
[extern]
perf_warn_limit = <integer> * Warn when external scripted command is applied to more than this many events * When set to “0”: Specifies for no message (message is always INFO level) * Default: 10000
[http_input]
max_number_of_tokens = <unsigned int> * The maximum number of tokens reported by logging input metrics. * Default: 10000 max_content_length = <integer> * The maximum length, in bytes, of HTTP request content that is accepted by the HTTP Event Collector server. * Default: 838860800 (~ 800 MB) max_number_of_ack_channel = <integer> * The maximum number of ACK channels accepted by HTTP Event Collector server. * Default: 1000000 (~ 1 million) max_number_of_acked_requests_pending_query = <integer> * The maximum number of ACKed requests pending query on HTTP Event Collector server. * Default: 10000000 (~ 10 million) max_number_of_acked_requests_pending_query_per_ack_channel = <integer> * The maximum number of ACKed requested pending query per ACK channel on HTTP Event Collector server.. * Default: 1000000 (~ 1 million) metrics_report_interval = <integer> * The interval, in seconds, of logging input metrics report. * Default: 60 (1 minute)
[indexpreview]
max_preview_bytes = <integer> * Maximum number of bytes to read from each file during preview * Default: 2000000 (2 MB) max_results_perchunk = <integer> * Maximum number of results to emit per call to preview data generator * Default: 2500 soft_preview_queue_size = <integer> * Loosely-applied maximum on number of preview data objects held in memory * Default: 100
[inputproc]
file_tracking_db_threshold_mb = <integer>
* This setting controls the trigger point at which the file tracking db (also
commonly known as the "fishbucket" or btree) rolls over. A new database is
created in its place. Writes are targeted at new db. Reads are first
targeted at new db, and we fall back to old db for read failures. Any reads
served from old db successfully will be written back into new db.
* MIGRATION NOTE: if this setting doesn't exist, the initialization code in
splunkd triggers an automatic migration step that reads in the current value
for "maxDataSize" under the "_thefishbucket" stanza in indexes.conf and
writes this value into etc/system/local/limits.conf.
learned_sourcetypes_limit = <0 or positive integer>
* Limits the number of entries added to the learned app for performance
reasons.
* If nonzero, limits two properties of data added to the learned app by the
file classifier. (Code specific to monitor:: stanzas that auto-determines
sourcetypes from content.)
* The number of sourcetypes added to the learned app's props.conf file will
be limited to approximately this number.
* The number of file-content fingerprints added to the learned app's
sourcetypes.conf file will be limited to approximately this number.
* The tracking for uncompressed and compressed files is done separately, so in
some cases this value may be exceeded.
* This limit is not the recommended solution for auto-identifying sourcetypes.
The usual best practices are to set sourcetypes in input stanzas, or
alternatively to apply them based on filename pattern in props.conf
[source::<pattern>] stanzas.
* Default: 1000
max_fd = <integer>
* Maximum number of file descriptors that a ingestion pipeline in Splunk
will keep open, to capture any trailing data from files that are written
to very slowly.
* Note that this limit will be applied per ingestion pipeline. For more
information about multiple ingestion pipelines see parallelIngestionPipelines
in the server.conf.spec file.
* With N parallel ingestion pipelines the maximum number of file descriptors that
can be open across all of the ingestion pipelines will be N * max_fd.
* Default: 100
monitornohandle_max_heap_mb = <integer>
* Controls the maximum memory used by the Windows-specific modular input
MonitorNoHandle in user mode.
* The memory of this input grows in size when the data being produced
by applications writing to monitored files comes in faster than the Splunk
system can accept it.
* When set to 0, the heap size (memory allocated in the modular input) can grow
without limit.
* If this size is limited, and the limit is encountered, the input will drop
some data to stay within the limit.
* Default: 0
tailing_proc_speed = <integer>
* REMOVED. This setting is no longer used.
monitornohandle_max_driver_mem_mb = <integer>
* Controls the maximum NonPaged memory used by the Windows-specific kernel driver of modular input
MonitorNoHandle.
* The memory of this input grows in size when the data being produced
by applications writing to monitored files comes in faster than the Splunk
system can accept it.
* When set to 0, the NonPaged memory size (memory allocated in the kernel driver of modular input) can grow
without limit.
* If this size is limited, and the limit is encountered, the input will drop
some data to stay within the limit.
* Default: 0
monitornohandle_max_driver_records = <integer>
* Controls memory growth by limiting the maximum in-memory records stored
by the kernel module of Windows-specific modular input MonitorNoHandle.
* When monitornohandle_max_driver_mem_mb is set to > 0, this config is ignored.
* monitornohandle_max_driver_mem_mb and monitornohandle_max_driver_records are mutually exclusive.
* If the limit is encountered, the input will drop some data to stay within the limit.
* Defaults to 500.
time_before_close = <integer>
* MOVED. This setting is now configured per-input in inputs.conf.
* Specifying this setting in limits.conf is DEPRECATED, but for now will
override the setting for all monitor inputs.
[journal_compression]
threads = <integer> * Specifies the maximum number of indexer threads which will be work on compressing hot bucket journal data. * This setting does not typically need to be modified. * Default: The number of CPU threads of the host machine
[kv]
avg_extractor_time = <integer> * Maximum amount of CPU time, in milliseconds, that the average (over search results) execution time of a key-value pair extractor will be allowed to take before warning. Once the average becomes larger than this amount of time a warning will be issued * Default: 500 (.5 seconds) limit = <integer> * The maximum number of fields that an automatic key-value field extraction (auto kv) can generate at search time. * If search-time field extractions are disabled (KV_MODE=none in props.conf) then this setting determines the number of index-time fields that will be returned. * The summary fields 'host', 'index', 'source', 'sourcetype', 'eventtype', 'linecount', 'splunk_server', and 'splunk_server_group' do not count against this limit and will always be returned. * Increase this setting if, for example, you have indexed data with a large number of columns and want to ensure that searches display all fields from the data. * Default: 100 maxchars = <integer> * Truncate _raw to this size and then do auto KV. * Default: 10240 characters maxcols = <integer> * When non-zero, the point at which kv should stop creating new fields. * Default: 512 max_extractor_time = <integer> * Maximum amount of CPU time, in milliseconds, that a key-value pair extractor will be allowed to take before warning. If the extractor exceeds this execution time on any event a warning will be issued * Default: 1000 (1 second)
[kvstore]
max_accelerations_per_collection = <unsigned int> * The maximum number of accelerations that can be assigned to a single collection * Valid values range from 0 to 50 * Default: 10 max_documents_per_batch_save = <unsigned int> * The maximum number of documents that can be saved in a single batch * Default: 1000 max_fields_per_acceleration = <unsigned int> * The maximum number of fields that can be part of a compound acceleration (i.e. an acceleration with multiple keys) * Valid values range from 0 to 50 * Default: 10 max_queries_per_batch = <unsigned int> * The maximum number of queries that can be run in a single batch * Default: 1000 max_rows_in_memory_per_dump = <unsigned int> * The maximum number of rows in memory before flushing it to the CSV projection of KVStore collection. * Default: 200 max_rows_per_query = <unsigned int> * The maximum number of rows that will be returned for a single query to a collection. * If the query returns more rows than the specified value, then returned result set will contain the number of rows specified in this value. * Default: 50000 max_size_per_batch_result_mb = <unsigned int> * The maximum size, in megabytes (MB), of the result set from a set of batched queries * Default: 100 max_size_per_batch_save_mb = <unsigned int> * The maximum size, in megabytes (MB), of a batch save query. * Default: 50 max_size_per_result_mb = <unsigned int> * The maximum size, in megabytes (MB), of the result that will be returned for a single query to a collection. * Default: 50 max_threads_per_outputlookup = <unsigned int> * The maximum number of threads to use during outputlookup commands on KVStore * If the value is 0 the thread count will be determined by CPU count * Default: 1
[input_channels]
max_inactive = <integer> * Internal setting, do not change unless instructed to do so by Splunk Support. lowater_inactive = <integer> * Internal setting, do not change unless instructed to do so by Splunk Support. inactive_eligibility_age_seconds = <integer> * Internal setting, do not change unless instructed to do so by Splunk Support.
[ldap]
allow_multiple_matching_users = <bool> * This controls whether we allow login when we find multiple entries with the same value for the username attribute * When multiple entries are found, we choose the first user DN lexicographically * Setting this to false is more secure as it does not allow any ambiguous login, but users with duplicate entries will not be able to login. * Default: true max_users_to_precache = <unsigned integer> * The maximum number of users we will attempt to pre-cache from LDAP after reloading auth * Set this to 0 to turn off pre-caching
[metrics]
interval = <integer> * Number of seconds between logging splunkd metrics to metrics.log. * Minimum of 10. * Default: 30 maxseries = <integer> * The number of series to include in the per_x_thruput reports in metrics.log. * Default: 10
[metrics:tcpin_connections]
aggregate_metrics = [true|false] * For each splunktcp connection from forwarder, splunk logs metrics information every metrics interval. * When there are large number of forwarders connected to indexer, the amount of information logged can take lot of space in metrics.log. When set to true, it will aggregate information across each connection and report only once per metrics interval. * Default: false suppress_derived_info = [true|false] * For each forwarder connection, _tcp_Bps, _tcp_KBps, _tcp_avg_thruput, _tcp_Kprocessed is logged in metrics.log. * This can be derived from kb. When set to true, the above derived info will not be emitted. * Default: false
[pdf]
max_rows_per_table = <unsigned int> * The maximum number of rows that will be rendered for a table within integrated PDF rendering * Default: 1000 render_endpoint_timeout = <unsigned int> * The number of seconds after which the pdfgen render endpoint will timeout if it has not yet finished rendering the PDF output * Default: 3600 (60 minutes)
[realtime]
# Default options for indexer support of real-time searches # These can all be overridden for a single search via REST API arguments alerting_period_ms = <int> * This limits the frequency that we will trigger alerts during a realtime search. * A value of 0 means unlimited and we will trigger an alert for every batch of events we read in dense realtime searches with expensive alerts this can overwhelm the alerting system. * Precedence: Searchhead * Default: 0 blocking = [0|1] * Specifies whether the indexer should block if a queue is full. * Default: false default_backfill = <bool> * Specifies if windowed real-time searches should backfill events * Default: true enforce_time_order = <bool> * Specifies if real-time searches should ensure that events are sorted in ascending time order (the UI will automatically reverse the order that it display events for real-time searches so in effect the latest events will be first) * Default: true indexfilter = [0|1] * Specifies whether the indexer should prefilter events for efficiency. * Default: 1 (true) indexed_realtime_update_interval = <int> * When you run an indexed realtime search, the list of searchable buckets needs to be updated. If the Splunk software is installed on a cluster, the list of allowed primary buckets is refreshed. If not installed on a cluster, the list of buckets, including any new hot buckets are refreshed. This setting controls the interval for the refresh. The setting must be less than the "indexed_realtime_disk_sync_delay" setting. If your realtime buckets transition from new to warm in less time than the value specified for the "indexed_realtime_update_interval" setting, data will be skipped by the realtime search in a clustered environment. * Precedence: Indexers * Default: 30 indexed_realtime_cluster_update_interval = <int> * This setting is deprecated. Use the "indexed_realtime_update_interval" setting instead. * While running an indexed realtime search, if we are on a cluster we need to update the list of allowed primary buckets. This controls the interval that we do this. And it must be less than the indexed_realtime_disk_sync_delay. If your buckets transition from Brand New to warm in less than this time indexed realtime will lose data in a clustered environment. * Precedence: Indexers * Default: 30 indexed_realtime_default_span = <int> * An indexed realtime search is made up of many component historical searches that by default will span this many seconds. If a component search is not completed in this many seconds the next historical search will span the extra seconds. To reduce the overhead of running an indexed realtime search you can change this span to delay longer before starting the next component historical search. * Precedence: Indexers * Default: 1 indexed_realtime_disk_sync_delay = <int> * This settings controls the number of seconds to wait for disk flushes to finish when using indexed/continuous/pseudo realtime search so that we see all of the data. * After indexing there is a non-deterministic period where the files on disk when opened by other programs might not reflect the latest flush to disk, particularly when a system is under heavy load. * Precedence: SearchHead overrides Indexers * Default: 60 indexed_realtime_maximum_span = <int> * While running an indexed realtime search, if the component searches regularly take longer than indexed_realtime_default_span seconds, then indexed realtime search can fall more than indexed_realtime_disk_sync_delay seconds behind realtime. Use this setting to set a limit after which we will drop data to return back to catch back up to the specified delay from realtime, and only search the default span of seconds. * Precedence: API overrides SearchHead overrides Indexers * Default: 0 (unlimited) indexed_realtime_use_by_default = <bool> * Should we use the indexedRealtime mode by default * Precedence: SearchHead * Default: false local_connect_timeout = <int> * Connection timeout, in seconds, for an indexer's search process when connecting to that indexer's splunkd. * Default: 5 local_receive_timeout = <int> * Receive timeout, in seconds, for an indexer's search process when connecting to that indexer's splunkd. * Default: 5 local_send_timeout = <int> * Send timeout, in seconds, for an indexer's search process when connecting to that indexer's splunkd. * Default: 5 max_blocking_secs = <int> * Maximum time, in seconds, to block if the queue is full (meaningless if blocking = false) * 0 means no limit * Default: 60 queue_size = <int> * Size of queue for each real-time search (must be >0). * Default: 10000
[restapi]
maxresultrows = <integer> * Maximum result rows to be returned by /events or /results getters from REST API. * Default: 50000 jobscontentmaxcount = <integer> * Maximum length of a property in the contents dictionary of an entry from /jobs getter from REST API * Value of 0 disables truncation * Default: 0 time_format_reject = <regular expression> * HTTP parameters for time_format and output_time_format which match this regex will be rejected (blacklisted). * The regex will be satisfied by a substring match anywhere in the parameter. * Intended as defense-in-depth against XSS style attacks against browser users by crafting specially encoded URLS for them to access splunkd. * If unset, all parameter strings will be accepted. * To disable this check entirely, set the value to empty. * Example of disabling: time_format_reject = * Default: [<>!] , which means that the less-than '<', greater-than '>', and exclamation point '!' are not allowed.
[reversedns]
rdnsMaxDutyCycle = <integer> * Generate diagnostic WARN in splunkd.log if reverse dns lookups are taking more than this percent of time * Range 0-100 * Default: 10
[sample]
maxsamples = <integer> * Default: 10000 maxtotalsamples = <integer> * Default: 100000
[scheduler]
action_execution_threads = <integer> * Number of threads to use to execute alert actions, change this number if your alert actions take a long time to execute. * This number is capped at 10. * Default: 2 actions_queue_size = <integer> * The number of alert notifications to queue before the scheduler starts blocking, set to 0 for infinite size. * Default: 100 actions_queue_timeout = <integer> * The maximum amount of time, in seconds, to block when the action queue size is full. * Default: 30 alerts_expire_period = <integer> * The amount of time, in seconds, between expired alert removal * This period controls how frequently the alerts list is scanned, the only benefit from reducing this is better resolution in the number of alerts fired at the savedsearch level. * Change not recommended. * Default: 120 alerts_max_count = <integer> * Maximum number of unexpired alerts information to keep for the alerts manager, when this number is reached Splunk will start discarding the oldest alerts. * Default: 50000 alerts_max_history = <integer>[s|m|h|d] * Maximum time to search in the past for previously triggered alerts. * splunkd uses this property to populate the Activity -> Triggered Alerts page at startup. * Values greater than the default may cause slowdown. * Relevant units are: s, sec, second, secs, seconds, m, min, minute, mins, minutes, h, hr, hour, hrs, hours, d, day, days. * Default: 7d alerts_scoping = host|splunk_server|all * Determines the scoping to use on the search to populate the triggered alerts page. Choosing splunk_server will result in the search query using splunk_server=local, host will result in the search query using host=<search-head-host-name>, and all will have no scoping added to the search query. * Default: splunk_server auto_summary_perc = <integer> * The maximum number of concurrent searches to be allocated for auto summarization, as a percentage of the concurrent searches that the scheduler can run. * Auto summary searches include: * Searches which generate the data for the Report Acceleration feature. * Searches which generate the data for Data Model acceleration. * Note: user scheduled searches take precedence over auto summary searches. * Default: 50 auto_summary_perc.<n> = <integer> auto_summary_perc.<n>.when = <cron string> * The same as auto_summary_perc but the value is applied only when the cron string matches the current time. This allows auto_summary_perc to have different values at different times of day, week, month, etc. * There may be any number of non-negative <n> that progress from least specific to most specific with increasing <n>. * The scheduler looks in reverse-<n> order looking for the first match. * If either these settings aren't provided at all or no "when" matches the current time, the value falls back to the non-<n> value of auto_summary_perc. concurrency_message_throttle_time = <int>[s|m|h|d] * Amount of time controlling throttling between messages warning about scheduler concurrency limits. * Relevant units are: s, sec, second, secs, seconds, m, min, minute, mins, minutes, h, hr, hour, hrs, hours, d, day, days. * Default: 10m introspection_lookback = <duration-specifier> * The amount of time to "look back" when reporting introspection statistics. * For example: what is the number of dispatched searches in the last 60 minutes? * Use [<int>]<unit> to specify a duration; a missing <int> defaults to 1. * Relevant units are: m, min, minute, mins, minutes, h, hr, hour, hrs, hours, d, day, days, w, week, weeks. * For example: "5m" = 5 minutes, "1h" = 1 hour. * Default: 1h max_action_results = <integer> * The maximum number of results to load when triggering an alert action. * Default: 50000 max_continuous_scheduled_search_lookback = <duration-specifier> * The maximum amount of time to run missed continuous scheduled searches for once Splunk comes back up in the event it was down. * Use [<int>]<unit> to specify a duration; a missing <int> defaults to 1. * Relevant units are: m, min, minute, mins, minutes, h, hr, hour, hrs, hours, d, day, days, w, week, weeks, mon, month, months. * For example: "5m" = 5 minutes, "1h" = 1 hour. * A value of 0 means no lookback. * Default: 24h max_lock_files = <int> * The number of most recent lock files to keep around. * This setting only applies in search head pooling. max_lock_file_ttl = <int> * Time, in seconds, that must pass before reaping a stale lock file. * Only applies in search head pooling. max_per_result_alerts = <int> * Maximum number of alerts to trigger for each saved search instance (or real-time results preview for RT alerts) * Only applies in non-digest mode alerting. Use 0 to disable this limit * Default: 500 max_per_result_alerts_time = <integer> * Maximum number of time, in seconds, to spend triggering alerts for each saved search instance (or real-time results preview for RT alerts) * Only applies in non-digest mode alerting. Use 0 to disable this limit. * Default: 300 (5 minutes) max_searches_perc = <integer> * The maximum number of searches the scheduler can run, as a percentage of the maximum number of concurrent searches, see [search] max_searches_per_cpu for how to set the system wide maximum number of searches. * Default: 50 max_searches_perc.<n> = <integer> max_searches_perc.<n>.when = <cron string> * The same as max_searches_perc but the value is applied only when the cron string matches the current time. This allows max_searches_perc to have different values at different times of day, week, month, etc. * There may be any number of non-negative <n> that progress from least specific to most specific with increasing <n>. * The scheduler looks in reverse-<n> order looking for the first match. * If either these settings aren't provided at all or no "when" matches the current time, the value falls back to the non-<n> value of max_searches_perc. persistance_period = <integer> * The period, in seconds, between scheduler state persistance to disk. The scheduler currently persists the suppression and fired-unexpired alerts to disk. * This is relevant only in search head pooling mode. * Default: 30 priority_runtime_factor = <double> * The amount to scale the priority runtime adjustment by. * Every search's priority is made higher (worse) by its typical running time. Since many searches run in fractions of a second and the priority is integral, adjusting by a raw runtime wouldn't change the result; therefore, it's scaled by this value. * Default: 10 priority_skipped_factor = <double> * The amount to scale the skipped adjustment by. * A potential issue with the priority_runtime_factor is that now longer-running searches may get starved. To balance this out, make a search's priority lower (better) the more times it's been skipped. Eventually, this adjustment will outweigh any worse priority due to a long runtime. This value controls how quickly this happens. * Default: 1 dispatch_retry_delay = <unsigned int> * The amount of time, in seconds, to delay retrying a scheduled search that failed to dispatch (usually due to hitting concurrency limits). * Maximum value: 30 * Default: 0 saved_searches_disabled = <bool> * Whether saved search jobs are disabled by the scheduler. * Default: false scheduled_view_timeout = <int>[s|m|h|d] * The maximum amount of time that a scheduled view (pdf delivery) would be allowed to render * Relevant units are: s, sec, second, secs, seconds, m, min, minute, mins, minutes, h, hr, hour, hrs, hours, d, day, days. * Default: 60m shc_role_quota_enforcement = <bool> * When this attribute is enabled, the search head cluster captain enforces user-role quotas for scheduled searches globally (cluster-wide). * A given role can have (n *number_of_members) searches running cluster-wide, where n is the quota for that role as defined by srchJobsQuota and rtSrchJobsQuota on the captain and number_of_members include the members capable of running scheduled searches. * Scheduled searches will therefore not have an enforcement of user role quota on a per-member basis. * Role-based disk quota checks (srchDiskQuota in authorize.conf) can be enforced only on a per-member basis. These checks are skipped when shc_role_quota_enforcement is enabled. * Quota information is conveyed from the members to the captain. Network delays can cause the quota calculation on the captain to vary from the actual values in the members and may cause search limit warnings. This should clear up as the information is synced. * Default: false shc_syswide_quota_enforcement = <bool> * When this is enabled, Maximum number of concurrent searches is enforced globally (cluster-wide) by the captain for scheduled searches. Concurrent searches include both scheduled searches and ad hoc searches. * This is (n * number_of_members) where n is the max concurrent searches per node (see max_searches_per_cpu for a description of how this is computed) and number_of_members include members capable of running scheduled searches. * Scheduled searches will therefore not have an enforcement of instance-wide concurrent search quota on a per-member basis. * Note that this does not control the enforcement of the scheduler quota. For a search head cluster, that is defined as (max_searches_perc * number_of_members) and is always enforced globally on the captain. * Quota information is conveyed from the members to the captain. Network delays can cause the quota calculation on the captain to vary from the actual values in the members and may cause search limit warnings. This should clear up as the information is synced. * Default: false shc_local_quota_check = <bool> * DEPRECATED. Local (per-member) quota check is enforced by default. * To disable per-member quota checking, enable one of the cluster-wide quota checks (shc_role_quota_enforcement or shc_syswide_quota_enforcement). * For example, setting shc_role_quota_enforcement=true turns off local role quota enforcement for all nodes in the cluster and is enforced cluster-wide by the captain. shp_dispatch_to_slave = <bool> * By default the scheduler should distribute jobs throughout the pool. * Default: true search_history_load_timeout = <duration-specifier> * The maximum amount of time to defer running continuous scheduled searches while waiting for the KV Store to come up in order to load historical data. This is used to prevent gaps in continuous scheduled searches when splunkd was down. * Use [<int>]<unit> to specify a duration; a missing <int> defaults to 1. * Relevant units are: s, sec, second, secs, seconds, m, min, minute, mins, minutes. * For example: "60s" = 60 seconds, "5m" = 5 minutes. * Default: 2m search_history_max_runtimes = <unsigned int> * The number of runtimes kept for each search. * Used to calculate historical typical runtime during search prioritization. * Default: 10
[search_metrics]
debug_metrics = <bool> * This indicates whether we should output more detailed search metrics for debugging. * This will do things like break out where the time was spent by peer, and may add additional deeper levels of metrics. * This is NOT related to "metrics.log" but to the "Execution Costs" and "Performance" fields in the Search inspector, or the count_map in the info.csv file. * Default: false
[show_source]
distributed = <bool> * Controls whether we will do a distributed search for show source to get events from all servers and indexes * Turning this off results in better performance for show source, but events will only come from the initial server and index * NOTE: event signing and verification is not supported in distributed mode * Default: true distributed_search_limit = <unsigned int> * Sets a limit on the maximum events we will request when doing the search for distributed show source * As this is used for a larger search than the initial non-distributed show source, it is larger than max_count * Splunk will rarely return anywhere near this amount of results, as we will prune the excess results * The point is to ensure the distributed search captures the target event in an environment with many events * Default: 30000 max_count = <integer> * Maximum number of events accessible by show_source. * The show source command will fail when more than this many events are in the same second as the requested event. * Default: 10000 max_timeafter = <timespan> * Maximum time after requested event to show. * Default: '1day' (86400 seconds) max_timebefore = <timespan> * Maximum time before requested event to show. * Default: '1day' (86400 seconds)
[rex]
match_limit = <integer> * Limits the amount of resources that are spent by PCRE when running patterns that will not match. * Use this to set an upper bound on how many times PCRE calls an internal function, match(). If set too low, PCRE might fail to correctly match a pattern. * Default: 100000 depth_limit = <integer> * Limits the amount of resources that are spent by PCRE when running patterns that will not match. * Use this to limit the depth of nested backtracking in an internal PCRE function, match(). If set too low, PCRE might fail to correctly match a pattern. * Default: 1000
[slc]
maxclusters = <integer> * Maximum number of clusters to create. * Default: 10000.
[slow_peer_disconnect]
# This stanza contains settings for the heuristic that will detect and # disconnect slow peers towards the end of a search that has returned a # large volume of data. batch_search_activation_fraction = <double> * The fraction of peers that must have completed before we start disconnecting. * This is only applicable to batch search because the slow peers will not hold back the fast peers. * Default: 0.9 bound_on_disconnect_threshold_as_fraction_of_mean = <double> * The maximum value of the threshold data rate we will use to determine if a peer is slow. The actual threshold will be computed dynamically at search time but will never exceed (100*maximum_threshold_as_fraction_of_mean)% on either side of the mean. * Default: 0.2 disabled = <boolean> * Specifies if this feature is enabled. * Default: true grace_period_before_disconnect = <double> * If the heuristic consistently claims that the peer is slow for at least <grace_period_before_disconnect>*life_time_of_collector seconds then only will we disconnect the peer * Default: 0.1 packets_per_data_point = <unsigned int> * Rate statistics will be sampled once every packets_per_data_point packets. * Default: 500 sensitivity = <double> * Sensitivity of the heuristic to newer values. For larger values of sensitivity the heuristic will give more weight to newer statistic. * Default: 0.3 threshold_connection_life_time = <unsigned int> * All peers will be given an initial grace period of at least these many seconds before we consider them in the heuristic. * Default: 60 threshold_data_volume = <unsigned int> * The volume of uncompressed data that must have accumulated, in kilobytes (KB), from a peer before we consider them in the heuristic. * Default: 1024
[summarize]
bucket_refresh_interval = <int> * When poll_buckets_until_maxtime is enabled in a non-clustered environment, this is the minimum amount of time (in seconds) between bucket refreshes. * Default: 30 bucket_refresh_interval_cluster = <int> * When poll_buckets_until_maxtime is enabled in a clustered environment, this is the minimum amount of time (in seconds) between bucket refreshes. * Default: 120 hot_bucket_min_new_events = <integer> * The minimum number of new events that need to be added to the hot bucket (since last summarization) before a new summarization can take place. To disable hot bucket summarization set this value to a * large positive number. * Default: 100000 indextime_lag = <unsigned int> * The amount of lag time, in seconds, to give indexing to ensure that it has synced any received events to disk. Effectively, the data that has been received in the past “indextime_lag” will NOT be summarized. * Do not change this value unless directed by Splunk support. * Default: 90 max_hot_bucket_summarization_idle_time = <unsigned int> * Maximum amount of time, in seconds, a hot bucket can be idle. When the time exceeds the maximum, all of the events are summarized even if there are not enough events (determined by the hot_bucket_min_new_events attribute). * Default: 900 (15 minutes) max_replicated_hot_bucket_idle_time = <unsigned int> * Maximum amount of time, in seconds, a replicated hot bucket can be idle after which we won't apply indextime_lag. * This applies to only idle replicated hot buckets. As soon as new events start flowing in we will revert to the default behavior of applying indextime_lag * Default: 150 max_summary_ratio = <float> * A number in the [0-1] range that indicates the maximum ratio of summary data / bucket size at which point the summarization of that bucket, for the particular search, will be disabled. Use 0 to disable. * Default: 0 max_summary_size = <int> * Size of summary, in bytes, at which point we'll start applying the max_summary_ratio. Use 0 to disable. * Default: 0 max_time = <int> * The maximum amount of time, seconds, that a summary search process is allowed to run. * Use 0 to disable. * Default: 0 poll_buckets_until_maxtime = <bool> * Only modify this setting when you are directed to do so by Support. * Use the datamodels.conf setting acceleration.poll_buckets_until_maxtime for individual data models that are sensitive to summarization latency delays. * Default: false sleep_seconds = <integer> * The amount of time, in seconds, to sleep between polling of summarization complete status. * Default: 5 stale_lock_seconds = <integer> * The amount of time, in seconds, to have elapse since the mod time of a .lock file before summarization considers * that lock file stale and removes it. * Default: 600
[system_checks]
insufficient_search_capabilities = enabled | disabled
* Enables/disables automatic daily logging of scheduled searches by users
who have insufficient capabilities to run them as configured.
* Such searches are those that:
+ Have schedule_priority set to a value other than "default" but the
owner does not have the edit_search_schedule_priority capability.
+ Have schedule_window set to a value other than "auto" but the owner does
not have the edit_search_schedule_window capability.
* This check and any resulting logging occur on system startup and every 24
hours thereafter.
* Default: enabled
installed_files_integrity = enabled | log_only | disabled
* Enables/disables automatic verification on every startup that all the
files that were installed with the running Splunk version are still the
files that should be present.
* Effectively this finds cases where files were removed or changed that
should not be removed or changed, whether by accident or intent.
* The source of truth for the files that should be present is the manifest
file in the $SPLUNK_HOME directory that comes with the release, so if
this file is removed or altered, the check cannot work correctly.
* Reading of all the files provided with the install has some I/O cost,
though it is paid out over many seconds and should not be severe.
* When "enabled", detected problems will cause a message to be posted to
the bulletin board (system UI status message).
* When "enabled" or "log_only", detected problems will cause details to be
written out to splunkd.log
* When "disabled", no check will be attempted or reported.
* Default: enabled
orphan_searches = enabled|disabled
* Enables/disables automatic UI message notifications to admins for
scheduled saved searches with invalid owners.
* Scheduled saved searches with invalid owners are considered "orphaned".
They cannot be run because Splunk cannot determine the roles to use for
the search context.
* Typically, this situation occurs when a user creates scheduled searches
then departs the organization or company, causing their account to be
deactivated.
* Currently this check and any resulting notifications occur on system
startup and every 24 hours thereafter.
* Default: enabled
[thruput]
maxKBps = <integer>
* The maximum speed, in kilobytes per second, that incoming data is
processed through the thruput processor in the ingestion pipeline.
* To control the CPU load while indexing, use this setting to throttle
the number of events this indexer processes to the rate (in
kilobytes per second) that you specify.
* NOTE:
* There is no guarantee that the thruput processor
will always process less than the number of kilobytes per
second that you specify with this setting. The status of
earlier processing queues in the pipeline can cause
temporary bursts of network activity that exceed what
is configured in the setting.
* The setting does not limit the amount of data that is
written to the network from the tcpoutput processor, such
as what happens when a universal forwarder sends data to
an indexer.
* The thruput processor applies the 'maxKBps' setting for each
ingestion pipeline. If you configure multiple ingestion
pipelines, the processor multiplies the 'maxKBps' value
by the number of ingestion pipelines that you have
configured.
* For more information about multiple ingestion pipelines, see
the 'parallelIngestionPipelines' setting in the
server.conf.spec file.
* Default (Splunk Enterprise): 0 (unlimited)
* Default (Splunk Universal Forwarder): 256
[viewstates]
enable_reaper = <boolean> * Controls whether the viewstate reaper runs * Default: true reaper_freq = <integer> * Controls how often, in seconds, the viewstate reaper runs. * Default: 86400 (24 hours) reaper_soft_warn_level = <integer> * Controls what the reaper considers an acceptable number of viewstates. * Default: 1000 ttl = <integer> * Controls the age, in seconds, at which a viewstate is considered eligible for reaping * Default: 86400 (24 hours)
[scheduled_views]
# Scheduled views are hidden [saved searches / reports] that trigger PDF generation # for a dashboard. When a user enables scheduled PDF delivery in the dashboard UI, # scheduled views are created. # # The naming pattern for scheduled views is _ScheduledView__<view_name>, # where <view_name> is the name of the corresponding dashboard. # # The scheduled views reaper, if enabled, runs periodically to look for # scheduled views that have been orphaned. A scheduled view becomes orphaned # when its corresponding dashboard has been deleted. The scheduled views reaper # deletes these orphaned scheduled views. The reaper only deletes scheduled # views if the scheduled views have not been disabled and their permissions # have not been modified. enable_reaper = <boolean> * Controls whether the scheduled views reaper runs, as well as whether * scheduled views are deleted when the dashboard they reference is deleted. * Default: true reaper_freq = <integer> * Controls how often, in seconds, the scheduled views reaper runs. * Default: 86400 (24 hours)
OPTIMIZATION
# This section contains global and specific optimization settings
[search_optimization]
enabled = <bool> * Enables search optimizations * Default: true
[search_optimization::search_expansion]
enabled = <bool> * Enables optimizer-based search expansion. * This enables the optimizer to work on pre-expanded searches. * Default: true # NOTE: Do not edit the below configurations unless directed by support
[search_optimization::replace_append_with_union]
enabled = <bool> * Enables replace append with union command optimization * Default: true
[search_optimization::merge_union]
enabled = <bool> * Merge consecutive unions * Default: true
[search_optimization::predicate_merge]
enabled = <bool> * Enables predicate merge optimization * Default: true inputlookup_merge = <bool> * Enables predicate merge optimization to merge predicates into inputlookup * predicate_merge must be enabled for this optimization to be performed * Default: true merge_to_base_search = <bool> * Enable the predicate merge optimization to merge the predicates into the first search in the pipeline. * Default: true fields_black_list = <fields_list> * A comma-separated list of fields that will not be merged into the first search in the pipeline. * If a field contains sub-tokens as values, then the field should be added to fields_black_list * Default: no default
[search_optimization::predicate_push]
enabled = <bool> * Enables predicate push optimization * Default: true
[search_optimization::predicate_split]
enabled = <bool> * Enables predicate split optimization * Default: true
[search_optimization::projection_elimination]
enabled = <bool> * Enables projection elimination optimization * Default: true cmds_black_list = <Commands List> * A comma-separated list of commands that are not affected by projection elimination optimization. * Default: no default
[search_optimization::required_field_values]
enabled = <bool> * Enables required field value optimization * Default: true fields = <comma-separated-string> * Provide a comma-separated-list of field names to optimize. * Currently the only valid field names are eventtype and tag. * Optimization of event type and tag field values applies to transforming searches. This optimization ensures that only the event types and tags neccesary to process a search are loaded by the search processor. * Only change this setting if you need to troubleshoot an issue. * Default: eventtype, tag
[search_optimization::search_flip_normalization]
enabled = <bool> * Enables predicate flip normalization. * This type of normalization takes 'where' command statements in which the value is placed before the field name and reverses them so that the field name comes first. * Predicate flip normalization only works for numeric values and string values where the value is surrounded by quotes. * Predicate flip normalization also prepares searches to take advantage of predicate merge optimization. * Disable search_flip_normalization if you determine that it is causing slow search performance. * Default: true
[search_optimization::reverse_calculated_fields]
enabled = <bool> * Enables reversing of calculated fields optimization. * Default: true
[search_optimization::search_sort_normalization]
enabled = <bool> * Enables predicate sort normalization. * This type of normalization applies lexicographical sorting logic to 'search' command expressions and 'where' command statements, so they are consistently ordered in the same way. * Disable search_sort_normalization if you determine that it is causing slow search performance. * Default: true
[search_optimization::eval_merge]
enabled = <bool> * Enables a search language optimization that combines two consecutive "eval" statements into one and can potentially improve search performance. * There should be no side-effects to enabling this setting and need not be changed unless you are troubleshooting an issue with search results. * Default: true
[search_optimization::replace_table_with_fields]
enabled = <bool> * Enables a search language optimization that replaces the table command with the fields command in reporting or stream reporting searches * There should be no side-effects to enabling this setting and need not be changed unless you are troubleshooting an issue with search results. * Default: true
[directives]
required_tags = enabled|disabled * Enables the use of the required tags directive, which allows the search processor to load only the required tags from the conf system. * Disable this setting only to troubleshoot issues with search results. * Default: true required_eventtypes = enabled|disabled * Enables the use of the required eventtypes directive, which allows the search processor to load only the required event types from the conf system. * Disable this setting only to troubleshoot issues with search results. * Default: true read_summary = enabled|disabled * Enables the use of the read summary directive, which allows the search processor to leverage existing data model acceleration summary data when it performs event searches. * Disable this setting only to troubleshoot issues with search results. * Default: true
[parallelreduce]
maxReducersPerPhase = <positive integer> * The maximum number of valid indexers that can be used as intermediate reducers in the reducing phase of a parallel reduce operation. Only healthy search peers are valid indexers. * If you specify a number greater than 200 or an invalid value, parallel reduction does not take place. All reduction processing moves to the search head. * Default: 4 maxRunningPrdSearches = <unsigned int> * DEPRECATED. Use the 'maxPrdSearchesPerCpu' setting instead. maxPrdSearchesPerCpu = <unsigned int> * The maximum number of parallel reduce searches that can run, per CPU core, on an indexer that has been configured as an intermediate reducer. * If you specify 0, there is no limit. The indexer runs as many parallel reduce searches as the indexer hardware permits. * Default: 1 reducers = <string> * Use this setting to configure one or more valid indexers as dedicated intermediate reducers for parallel reduce search operations. Only healthy search peers are valid indexers. * For <string>, specify the indexer host and port using the following format - host:port. Separate each host:port pair with a comma to specify a list of intermediate reducers. * If the 'reducers' list includes one or more valid indexers, all of those indexers (and only these indexers) are used as intermediate reducers when you run a parallel reduce search. If the number of valid indexers in the 'reducers' list exceeds 'maxReducersPerPhase', the Splunk software randomly selects the set of indexers that are used as intermediate reducers. * If all of the indexers in the 'reducers' list are invalid, the search runs without parallel reduction. All reduce operations for the search are processed on the search head. * If 'reducers' is empty or not configured, all valid indexers are potential intermediate reducer candidates. The Splunk software randomly selects valid indexers as intermediate reducers with limits determined by the 'winningRate' and 'maxReducersPerPhase' settings. * Default: "" winningRate = <positive integer> * The percentage of valid indexers that can be selected from the search peers as intermediate reducers for a parallel reduce search operation. * This setting is only respected when the 'reducers' setting is empty or not configured. * If 100 is specified, the search head attempts to use all of the indexers. * If 1 is specified, the search head attempts to use 1% of the indexers. * The minimum number of indexers used as intermediate reducers is 1. * The maximum number of indexers used as intermediate reducers is the value of 'maxReducersPerPhase'. * Default: 50
limits.conf.example
# Version 7.2.3 # CAUTION: Do not alter the settings in limits.conf unless you know what you are doing. # Improperly configured limits may result in splunkd crashes and/or memory overuse. [searchresults] maxresultrows = 50000 # maximum number of times to try in the atomic write operation (1 = no retries) tocsv_maxretry = 5 # retry period is 1/2 second (500 milliseconds) tocsv_retryperiod_ms = 500 [subsearch] # maximum number of results to return from a subsearch maxout = 100 # maximum number of seconds to run a subsearch before finalizing maxtime = 10 # time to cache a given subsearch's results ttl = 300 [anomalousvalue] maxresultrows = 50000 # maximum number of distinct values for a field maxvalues = 100000 # maximum size in bytes of any single value (truncated to this size if larger) maxvaluesize = 1000 [associate] maxfields = 10000 maxvalues = 10000 maxvaluesize = 1000 # for the contingency, ctable, and counttable commands [ctable] maxvalues = 1000 [correlate] maxfields = 1000 # for bin/bucket/discretize [discretize] maxbins = 50000 # if maxbins not specified or = 0, defaults to searchresults::maxresultrows [inputcsv] # maximum number of retries for creating a tmp directory (with random name in # SPLUNK_HOME/var/run/splunk) mkdir_max_retries = 100 [kmeans] maxdatapoints = 100000000 [kv] # when non-zero, the point at which kv should stop creating new columns maxcols = 512 [rare] maxresultrows = 50000 # maximum distinct value vectors to keep track of maxvalues = 100000 maxvaluesize = 1000 [restapi] # maximum result rows to be returned by /events or /results getters from REST # API maxresultrows = 50000 [search] # how long searches should be stored on disk once completed ttl = 86400 # the approximate maximum number of timeline buckets to maintain status_buckets = 300 # the last accessible event in a call that takes a base and bounds max_count = 10000 # the minimum length of a prefix before a * to ask the index about min_prefix_len = 1 # the length of time to persist search cache entries (in seconds) cache_ttl = 300 # By default, we will not retry searches in the event of indexer # failures with indexer clustering enabled. # Hence, the default value for search_retry here is false. search_retry = false # Timeout value for checking search marker files like hotbucketmarker or backfill # marker. check_search_marker_done_interval = 60 # Time interval of sleeping between subsequent search marker files checks. check_search_marker_sleep_interval = 1 # If number of cpu's in your machine is 14 then total system wide number of # concurrent searches this machine can handle is 20. # which is base_max_searches + max_searches_per_cpu x num_cpus = 6 + 14 x 1 = 20 base_max_searches = 6 max_searches_per_cpu = 1 [scheduler] # Percent of total concurrent searches that will be used by scheduler is # total concurrency x max_searches_perc = 20 x 60% = 12 scheduled searches # User default value (needed only if different from system/default value) when # no max_searches_perc.<n>.when (if any) below matches. max_searches_perc = 60 # Increase the value between midnight-5AM. max_searches_perc.0 = 75 max_searches_perc.0.when = * 0-5 * * * # More specifically, increase it even more on weekends. max_searches_perc.1 = 85 max_searches_perc.1.when = * 0-5 * * 0,6 # Maximum number of concurrent searches is enforced cluster-wide by the # captain for scheduled searches. For a 3 node SHC total concurrent # searches = 3 x 20 = 60. The total searches (adhoc + scheduled) = 60, then # no more scheduled searches can start until some slots are free. shc_syswide_quota_enforcement = true [slc] # maximum number of clusters to create maxclusters = 10000 [findkeywords] #events to use in findkeywords command (and patterns UI) maxevents = 50000 [stats] maxresultrows = 50000 maxvalues = 10000 maxvaluesize = 1000 [top] maxresultrows = 50000 # maximum distinct value vectors to keep track of maxvalues = 100000 maxvaluesize = 1000 [search_optimization] enabled = true [search_optimization::predicate_split] enabled = true [search_optimization::predicate_push] enabled = true [search_optimization::predicate_merge] enabled = true inputlookup_merge = true merge_to_base_search = true [search_optimization::projection_elimination] enabled = true cmds_black_list = eval, rename [search_optimization::search_flip_normalization] enabled = true [search_optimization::reverse_calculated_fields] enabled = true [search_optimization::search_sort_normalization] enabled = true [search_optimization::replace_table_with_fields] enabled = true
Last modified on 22 December, 2018
| instance.cfg.conf | literals.conf |
This documentation applies to the following versions of Splunk® Enterprise: 7.2.3
Download manual
Feedback submitted, thanks!