serverclass.conf
The following are the spec and example files for serverclass.conf
.
serverclass.conf.spec
# Version 7.2.3 # # This file contains possible attributes and values for defining server # classes to which deployment clients can belong. These attributes and # values specify what content a given server class member will receive from # the deployment server. # # For examples, see serverclass.conf.example. You must reload deployment # server ("splunk reload deploy-server"), or restart splunkd, for changes to # this file to take effect. # # To learn more about configuration files (including precedence) please see # the documentation located at # http://docs.splunk.com/Documentation/Splunk/latest/Admin/Aboutconfigurationfiles #*************************************************************************** # Configure the server classes that are used by a deployment server instance. # # Server classes are essentially categories. They use filters to control # what clients they apply to, contain a set of applications, and may define # deployment server behavior for the management of those applications. The # filters can be based on DNS name, IP address, build number of client # machines, platform, and the so-called clientName. If a target machine # matches the filter, then the apps and configuration content that make up # the server class will be deployed to it. # Property Inheritance # # Stanzas in serverclass.conf go from general to more specific, in the # following order: # [global] -> [serverClass:<name>] -> [serverClass:<scname>:app:<appname>] # # Some properties defined at a general level (say [global]) can be # overridden by a more specific stanza as it applies to them. All # overridable properties are marked as such.
FIRST LEVEL: global ###########
# Global stanza that defines properties for all server classes. [global] disabled = true|false * Toggles deployment server component off and on. * Set to true to disable. * Defaults to false. crossServerChecksum = true|false * Ensures that each app will have the same checksum across different deployment servers. * Useful if you have multiple deployment servers behind a load-balancer. * Defaults to false. excludeFromUpdate = <path>[,<path>]... * Specifies paths to one or more top-level files or directories (and their contents) to exclude from being touched during app update. Note that each comma-separated entry MUST be prefixed by "$app_root$/" (otherwise a warning will be generated). * Can be overridden at the serverClass level. * Can be overridden at the app level. * Requires version 6.2.x or higher for both the Deployment Server and Client. repositoryLocation = <path> * The repository of applications on the server machine. * Can be overridden at the serverClass level. * Defaults to $SPLUNK_HOME/etc/deployment-apps targetRepositoryLocation = <path> * The location on the deployment client where to install the apps defined for this Deployment Server. * If this value is unset, or set to empty, the repositoryLocation path is used. * Useful only with complex (for example, tiered) deployment strategies. * Defaults to $SPLUNK_HOME/etc/apps, the live configuration directory for a Splunk instance. tmpFolder = <path> * Working folder used by deployment server. * Defaults to $SPLUNK_HOME/var/run/tmp continueMatching = true | false * Controls how configuration is layered across classes and server-specific settings. * If true, configuration lookups continue matching server classes, beyond the first match. * If false, only the first match will be used. * A serverClass can override this property and stop the matching. * Matching is done in the order in which server classes are defined. * Can be overridden at the serverClass level. * Defaults to true endpoint = <URL template string> * The endpoint from which content can be downloaded by a deployment client. The deployment client knows how to substitute values for variables in the URL. * Any custom URL can also be supplied here, as long as it uses the specified variables. * Need not be specified unless you have a very specific need, for example: To acquire deployment application files from a third-party Web server, for extremely large environments. * Can be overridden at the serverClass level. * Defaults to $deploymentServerUri$/services/streams/deployment?name=$serverClassName$:$appName$ filterType = whitelist | blacklist * The whitelist setting indicates a filtering strategy that pulls in a subset: * Items are not considered to match the stanza by default. * Items that match any whitelist entry, and do not match any blacklist entry are considered to match the stanza. * Items that match any blacklist entry are not considered to match the stanza, regardless of whitelist. * The blacklist setting indicates a filtering strategy that rules out a subset: * Items are considered to match the stanza by default. * Items that match any blacklist entry, and do not match any whitelist entry are considered to not match the stanza. * Items that match any whitelist entry are considered to match the stanza. * More briefly: * whitelist: default no-match -> whitelists enable -> blacklists disable * blacklist: default match -> blacklists disable-> whitelists enable * Can be overridden at the serverClass level, and the serverClass:app level. * Defaults to whitelist whitelist.<n> = <clientName> | <IP address> | <hostname> | <instanceId> blacklist.<n> = <clientName> | <IP address> | <hostname> | <instanceId> * 'n' is an unsigned integer. The sequence may start at any value and may be non-consecutive. * The value of this attribute is matched against several things in order: * Any clientName specified by the client in its deploymentclient.conf file * The IP address of the connected client * The hostname of the connected client, as provided by reverse DNS lookup * The hostname of the client, as provided by the client * For Splunk version > 6.4, the instanceId of the client. This is a GUID string, e.g. 'ffe9fe01-a4fb-425e-9f63-56cc274d7f8b'. * All of these can be used with wildcards. * will match any sequence of characters. For example: * Match a network range: 10.1.1.* * Match a domain: *.splunk.com * Can be overridden at the serverClass level, and the serverClass:app level. * There are no whitelist or blacklist entries by default. * These patterns are PCRE regular expressions, with the following aids for easier entry: * You can specify simply '.' to mean '\.' * You can specify simply '*' to mean '.*' * Matches are always case-insensitive; you do not need to specify the '(?i)' prefix. # Note: Overriding one type of filter (whitelist/blacklist) causes the other to # be overridden (and hence not inherited from parent) too. # Example with filterType=whitelist: # whitelist.0=*.splunk.com # blacklist.0=printer.splunk.com # blacklist.1=scanner.splunk.com # This will cause all hosts in splunk.com, except 'printer' and 'scanner', to # match this server class. # Example with filterType=blacklist: # blacklist.0=* # whitelist.0=*.web.splunk.com # whitelist.1=*.linux.splunk.com # This will cause only the 'web' and 'linux' hosts to match the server class. # No other hosts will match. # Deployment client machine types (hardware type of respective host machines) # can also be used to match DCs. # This filter will be used only if match of a client could not be decided using # the whitelist/blacklist filters. The value of each machine type is # designated by the hardware platform itself; a few common ones are: # linux-x86_64, windows-intel, linux-i686, freebsd-i386, darwin-i386, sunos-sun4u. # The method for finding it varies by platform; once a deployment client is # connected to the DS, however, you can determine the value of DC's machine # type with this Splunk CLI command on the DS: # <code>./splunk list deploy-clients</code> # The <code>utsname</code> values in the output are the respective DCs' machine # types. whitelist.from_pathname = <pathname> blacklist.from_pathname = <pathname> * As as alternative to a series of (whitelist|blacklist).<n>, the <clientName>, <IP address>, and <hostname> list can be imported from <pathname> that is either a plain text file or a comman-separated values (CSV) file. * May be used in conjunction with (whitelist|blacklist).select_field, (whitelist|blacklist).where_field, and (whitelist|blacklist).where_equals. * If used by itself, then <pathname> specifies a plain text file where one <clientName>, <IP address>, or <hostname> is given per line. * If used on conjuction with select_field, where_field, and where_equals, then <pathname> specifies a CSV file. * The <pathname> is relative to $SPLUNK_HOME. * May also be used in conjunction with (whitelist|blacklist).<n> to specify additional values, but there is no direct relation between them. * At most one from_pathname may be given per stanza. whitelist.select_field = <field name> | <positive integer> blacklist.select_field = <field name> | <positive integer> * Specifies which field of the CSV file contains the <clientName>, <IP address>, or <hostname> either by field name or number. * If <field name> is given, then the first line of the CSV file MUST be a header line containing the name(s) of all the field(s) and <field name> specifies which field contains the value(s) to be used. Note that field names are case-sensitive. * If <positive integer> is given, then it specifies the column number (starting at 1) of the field that contains the value(s) to be used. In this case, the first line of the CSV file MUST NOT be a header line. * MUST be used in conjuction with (whitelist|blacklist).from_pathname. * May be used in conjuction with (whitelist|blacklist).where_field and (whitelist|blacklist).where_equals. * At most one select_field may be given per stanza. whitelist.where_field = <field name> | <positive integer> blacklist.where_field = <field name> | <positive integer> * Specifies that only a subset of values are to be selected from (whitelist|blacklist).select_field. * Specifies which field of the CSV file contains values to be compared against for equality with the (whitelist|blacklist).where_equals values. * Like (whitelist|blacklist).select_field, the field may be specified by either name or number. However, select_field and where_field MUST be specified the same way, i.e., either BOTH by name or BOTH by number. * MUST be used in conjuction with (whitelist|blacklist).select_field and (whitelist|blacklist).where_equals. * At most one where_field may be given per stanza. whitelist.where_equals = <comma-separated list> blacklist.where_equals = <comma-separated list> * Specifies the value(s) that the value of (whitelist|blacklist).where_field must equal in order to be selected via (whitelist|blacklist).select_field. * If more than one value is specified (separated by commas), then the value of (whitelist|blacklist).where_field may equal ANY ONE of the values. * Each value is a PCRE regular expression with the following aids for easier entry: * You can specify simply '.' to mean '\.' * You can specify simply '*' to mean '.*' * Matches are always case-insensitive; you do not need to specify the '(?i)' prefix. * MUST be used in conjuction with (whitelist|blacklist).select_field and (whitelist|blacklist).where_field. * At most one where_equals may be given per stanza. machineTypesFilter = <comma-separated list> * Not used unless specified. * Boolean OR logic is employed: a match against any element in the list constitutes a match. * This filter is used in boolean AND logic with white/blacklist filters. Only clients which match the white/blacklist AND which match this machineTypesFilter will be included. * In other words, the match is an intersection of the matches for the white/blacklist and the matches for MachineTypesFilter. * This filter can be overridden at the serverClass and serverClass:app levels. * These patterns are PCRE regular expressions, with the following aids for easier entry: * You can specify simply '.' to mean '\.' * You can specify simply '*' to mean '.*' * Matches are always case-insensitive; you do not need to specify the '(?i)' prefix. * Unset by default. restartSplunkWeb = true | false * If true, restarts SplunkWeb on the client when a member app or a directly configured app is updated. * Can be overridden at the serverClass level and the serverClass:app level. * Defaults to false restartSplunkd = true | false * If true, restarts splunkd on the client when a member app or a directly configured app is updated. * Can be overridden at the serverClass level and the serverClass:app level. * Defaults to false issueReload = true | false * If true, triggers a reload of internal processors at the client when a member app or a directly configured app is updated * If you don't want to immediately start using an app that is pushed to a client, you should set this to false. * defaults to false restartIfNeeded = true | false * This is only valid on forwarders that are newer than 6.4. * If true and issueReload is also true, then when an updated app is delpoyed to the client, that client will try to reload that app. If it fails, it will then restart. * defaults to false stateOnClient = enabled | disabled | noop * If set to "enabled", sets the application state to enabled on the client, regardless of state on the deployment server. * If set to "disabled", set the application state to disabled on the client, regardless of state on the deployment server. * If set to "noop", the state on the client will be the same as on the deployment server. * Can be overridden at the serverClass level and the serverClass:app level. * Defaults to enabled. precompressBundles = true | flase * Controls whether the Deployment Server will generate both .bundle and .bundle.gz files. The pre-compressed files offer improved performance as the DS is not required to compress the bundles on the fly for each client that it has to send the bundle to. However, this setting is only beneficial if there is no SSL compression in use and the client has support for HTTP compression. * Deployment Server / server.conf * allowSslCompression = false * useHTTPServerCompression = true * * Deployment Client / server.conf * useHTTPClientCompression = true * * This option is inherited and available upto the serverclass level (not app). Apps belonging to server classes that required precompression will be compressed, even if they belong to a server class which does not require precompression * Defaults to true
SECOND LEVEL: serverClass ###########
[serverClass:<serverClassName>] * This stanza defines a server class. A server class is a collection of applications; an application may belong to multiple server classes. * serverClassName is a unique name that is assigned to this server class. * A server class can override all inheritable properties in the [global] stanza. * A server class name may only contain: letters, numbers, space, underscore, dash, dot, tilde, and the '@' symbol. It is case-sensitive. # NOTE: # The keys listed below are all described in detail in the # [global] section above. They can be used with serverClass stanza to # override the global setting continueMatching = true | false endpoint = <URL template string> excludeFromUpdate = <path>[,<path>]... filterType = whitelist | blacklist whitelist.<n> = <clientName> | <IP address> | <hostname> blacklist.<n> = <clientName> | <IP address> | <hostname> machineTypesFilter = <comma-separated list> restartSplunkWeb = true | false restartSplunkd = true | false issueReload = true | false restartIfNeeded = true | false stateOnClient = enabled | disabled | noop repositoryLocation = <path>
THIRD LEVEL: app ###########
[serverClass:<server class name>:app:<app name>] * This stanza maps an application (which must already exist in repositoryLocation) to the specified server class. * server class name - the server class to which this content should be added. * app name can be '*' or the name of an app: * The value '*' refers to all content in the repositoryLocation, adding it to this serverClass. '*' stanza cannot be mixed with named stanzas, for a given server class. * The name of an app explicitly adds the app to a server class. Typically apps are named by the folders that contain them. * An application name, if it is not the special '*' sign explained directly above, may only contain: letters, numbers, space, underscore, dash, dot, tilde, and the '@' symbol. It is case-sensitive. appFile=<file name> * In cases where the app name is different from the file or directory name, you can use this parameter to specify the file name. Supported formats are: directories, .tar files, and .tgz files. # May override higher-level settings. issueReload = true | false restartIfNeeded = true | false excludeFromUpdate = <path>[,<path>]...
serverclass.conf.example
# Version 7.2.3 # # Example 1 # Matches all clients and includes all apps in the server class [global] whitelist.0=* # whitelist matches all clients. [serverClass:AllApps] [serverClass:AllApps:app:*] # a server class that encapsulates all apps in the repositoryLocation # Example 2 # Assign server classes based on dns names. [global] [serverClass:AppsForOps] whitelist.0=*.ops.yourcompany.com [serverClass:AppsForOps:app:unix] [serverClass:AppsForOps:app:SplunkLightForwarder] [serverClass:AppsForDesktops] filterType=blacklist # blacklist everybody except the Windows desktop machines. blacklist.0=* whitelist.0=*.desktops.yourcompany.com [serverClass:AppsForDesktops:app:SplunkDesktop] # Example 3 # Deploy server class based on machine types [global] [serverClass:AppsByMachineType] # Ensure this server class is matched by all clients. It is IMPORTANT to # have a general filter here, and a more specific filter at the app level. # An app is matched _only_ if the server class it is contained in was # successfully matched! whitelist.0=* [serverClass:AppsByMachineType:app:SplunkDesktop] # Deploy this app only to Windows boxes. machineTypesFilter=windows-* [serverClass:AppsByMachineType:app:unix] # Deploy this app only to unix boxes - 32/64 bit. machineTypesFilter=linux-i686, linux-x86_64 # Example 4 # Specify app update exclusion list. [global] # The local/ subdirectory within every app will not be touched upon update. excludeFromUpdate=$app_root$/local [serverClass:MyApps] [serverClass:MyApps:app:SpecialCaseApp] # For the SpecialCaseApp, both the local/ and lookups/ subdirectories will # not be touched upon update. excludeFromUpdate=$app_root$/local,$app_root$/lookups # Example 5 # Control client reloads/restarts [global] restartSplunkd=false restartSplunkWeb=true # For this serverclass, we attempt to only reload the configuration files # within the app, if we fail to reload ie if there's a conf in the app that # requires a restart, the admin must restart the instance themselves [serverClass:ReloadOnly] issueReload=true # This is an example of a best effort reloadable serverClass. ie we try to # reload the app, but if there are files that require a restart, only then # do we restart [serverClass:tryReloadThenRestart] issueReload=true restartIfNeeded=true # Example 6a # Use (whitelist|blacklist) text file import. [serverClass:MyApps] whitelist.from_pathname = etc/system/local/clients.txt # Example 6b # Use (whitelist|blacklist) CSV file import to read all values from the Client # field (ignoring all other fields). [serverClass:MyApps] whitelist.select_field = Client whitelist.from_pathname = etc/system/local/clients.csv # Example 6c # Use (whitelist|blacklist) CSV file import to read some values from the Client # field (ignoring all other fields) where ServerType is one of T1, T2, or # starts with dc. [serverClass:MyApps] whitelist.select_field = Client whitelist.from_pathname = etc/system/local/server_list.csv whitelist.where_field = ServerType whitelist.where_equals = T1, T2, dc* # Example 6d # Use (whitelist|blacklist) CSV file import to read some values from field 2 # (ignoring all other fields) where field 1 is one of T1, T2, or starts with # dc. [serverClass:MyApps] whitelist.select_field = 2 whitelist.from_pathname = etc/system/local/server_list.csv whitelist.where_field = 1 whitelist.where_equals = T1, T2, dc*
server.conf | serverclass.seed.xml.conf |
This documentation applies to the following versions of Splunk® Enterprise: 7.2.3
Feedback submitted, thanks!