savedsearches.conf

The following are the spec and example files for savedsearches.conf.

savedsearches.conf.spec

#   Version 8.0.10
#
# This file contains possible setting/value pairs for saved search entries in the
# savedsearches.conf file.  You can configure saved searches by creating your own
# savedsearches.conf file.
#
# There is a default savedsearches.conf file in $SPLUNK_HOME/etc/system/default. To
# set custom configurations, place a savedsearches.conf file in
# $SPLUNK_HOME/etc/system/local/.  For examples, see the
# savedsearches.conf.example file. You must restart Splunk to enable configurations.
#
# To learn more about configuration files (including precedence) please see the
# documentation located at
# http://docs.splunk.com/Documentation/Splunk/latest/Admin/Aboutconfigurationfiles

GLOBAL SETTINGS

# Use the [default] stanza to define any global settings.
#  * You can also define global settings outside of any stanza, at the top of
#    the file.
#  * Each conf file should have at most one default stanza. If there are
#    multiple default stanzas, settings are combined. In the case of multiple
#    definitions of the same settings, the last definition in the file wins.
#  * If a setting is defined at both the global level and in a specific
#    stanza, the value in the specific stanza takes precedence.

The possible settings for the savedsearches.conf file are:

[<stanza name>]
* Create a unique stanza name for each saved search.
* Follow the stanza name with any number of the following settings.
* If you do not specify a setting, Splunk software uses the default.

disabled = [0|1]
* Disable your search by setting 'disabled=1'.
* A disabled search cannot run until it is enabled.
* This setting is typically used to prevent a scheduled search from running
  on its schedule, without deleting the stanza for the search in the
  savedsearches.conf file.
* Default: 0

search = <string>
* The actual search string for the saved search.
    For example, 'search = index::sampledata http NOT 500'.
* Your search can include macro searches for substitution.
* To learn more about creating a macro search, search the documentation for
  "macro search."
* Multi-line search strings currently have some limitations.  For example use
  with the search command '|savedsearch' does not currently work with multi-line
  search strings.
* No default.

dispatchAs = [user|owner]
* When the saved search is dispatched using the "saved/searches/{name}/dispatch"
  endpoint, this setting controls what user that search is dispatched as.
* This setting is only meaningful for shared saved searches.
* When dispatched as "user", the search is run as if the requesting user owned
  the search.
* When dispatched as "owner", the search is run as if the owner of the search
  dispatched the search, no matter which user requested it.
* If the 'force_saved_search_dispatch_as_user' setting, in the limits.conf
  file, is set to "true", then the 'dispatchAs' setting is reset to "user" while
  the saved search is dispatching.
* Default: owner

Scheduling options

enableSched = [0|1]
* Set this to 1 (true) to run your search on a schedule.
* Default: 0

cron_schedule = <cron string>
* The cron schedule that is used to run this search.
* For example: */5 * * * *  causes the search to run every 5 minutes.
* You can use standard cron notation to define your scheduled search interval.
  In particular, cron can accept this type of notation: 00,20,40 * * * *, which
  runs the search every hour at hh:00, hh:20, hh:40.
  A cron of 03,23,43 * * * * runs the search every hour at hh:03, hh:23, hh:43.
* You should schedule your searches so that they are staggered over time.
  This reduces system load. Running all of the saved searches every 20 minutes
  (*/20) means all of the searches would launch at hh:00 (20, 40) and might
  slow your system every 20 minutes.
* The Splunk cron implementation does not currently support names of
  months or days.
* No default.

schedule = <cron-style string>
* This field is DEPRECATED as of version 4.0.
* For more information, see the pre-4.0 spec file.
* Use 'cron_schedule' to define your scheduled search interval.

allow_skew = <percentage>|<duration-specifier>
* Lets the search scheduler randomly distribute scheduled searches more
  evenly over the scheduled time periods.
* When set to non-zero for searches with the following cron_schedule values,
  the search scheduler randomly "skews" the second, minute, and hour that the
  search actually runs on:
    * * * * *     Every minute.
    */M * * * *   Every M minutes (M > 0).
    0 * * * *     Every hour.
    0 */H * * *   Every H hours (H > 0).
    0 0 * * *     Every day (at midnight).
* When set to non-zero for a search that has any other 'cron_schedule' setting,
  the search scheduler can only randomly skew the second that the search runs
  on.
* The amount of skew for a specific search remains constant between edits of
  the search.
* To specify a percentage: Use an integer value followed by the percent '%' symbol.
  This specifies the maximum amount of time to skew, as a percentage of the
  scheduled search period.
* To specify a duration: Use <integer><timescale> to specify a maximum duration.
  Supported units are:
    m, min, minute, mins, minutes
    h, hr, hour, hrs, hours
    d, day, days
  The <timescale> is required and can be omitted only when <integer> is 0.
* Skew examples:
    100% (For an every-5-minute search = 5 minutes maximum)
    50%  (For an every-1-minute search = 30 seconds maximum)
    5m = 5 minutes maximum
    1h = 1 hour maximum
* A value of 0 does not allow a skew to occur.
* Default: 0

max_concurrent = <unsigned integer>
* The maximum number of concurrent instances of this search that the scheduler
  is allowed to run.
* Default: 1

realtime_schedule = [0|1]
* Controls the way the scheduler computes the next run time of a
  scheduled search.
* If set to 1, the scheduler determines the next scheduled search run time
  based on the current time.
    * NOTE: When set to 1, the scheduler might skip some execution periods
      to make sure that the scheduler is executing the searches that are running
      over the most recent time range.
* If set to 0, the scheduler determines the next scheduled search run time
  based on the last run time for the search. This is called continuous
  scheduling.
    * NOTE: When set to 0, the scheduler never skips scheduled execution periods.
      However, the execution of the saved search might fall behind
      depending on the scheduler's load.
    * Use continuous scheduling whenever you enable the 'summary index' option.
* The scheduler tries to run searches that have 'realtime_schedule' set to 1
  before it runs searches that have continuous scheduling
  (realtime_schedule = 0).
* Default: 1

schedule_priority = [default | higher | highest]
* Raises the scheduling priority of a search:
  * When set to "default", specifies that there is no increase to the scheduling
    priority.
  * When set to "higher", specifies that the scheduling priority is higher than
    other searches of the same scheduling tier. While there are four tiers of
    priority for scheduled searches, only the following are affected by this
    setting:
      1. Real-Time-Scheduled (realtime_schedule=1).
      2. Continuous-Scheduled (realtime_schedule=0).
  * When set to "highest", specifies that the scheduling priority is higher
    than other searches regardless of scheduling tier. However,
    real-time-scheduled searches with 'schedule_priority = highest' always have
    priority over continuous scheduled searches with 'schedule_priority = highest'.
  * The high-to-low order is:
      RTSS(H) > CSS(H) > RTSS(h) > RTSS(d) > CSS(h) > CSS(d)
    Where:
        RTSS = real-time-scheduled search
        CSS = continuous-scheduled search
        d = default
        h = higher
        H = highest
* The scheduler honors a non-default priority only when the search owner has
  the 'edit_search_schedule_priority' capability.
  * A non-default priority is mutually exclusive with a non-zero 'schedule_window'
    (see below).  If a user specifies both for a scheduled search, the scheduler
    honors the priority only.
  * However, if a user specifies both settings for a search, but the search owner
    does not have the 'edit_search_scheduler_priority' capability, then the
    scheduler ignores the priority setting and honors the 'schedule_window'.
* CAUTION: Having too many searches with a non-default priority will impede the
  ability of the scheduler to minimize search starvation. Use this setting
  only for mission-critical searches.
* Default: default

schedule_window = <unsigned integer> | auto
* When schedule_window is non-zero, it indicates to the scheduler that the
  search does not require a precise start time. This gives the scheduler
  greater flexibility when it prioritizes searches.
* When 'schedule_window' is set to an integer greater than 0, it specifies the
  "window" of time (in minutes) that a search may start within.
    * The 'schedule_window' must be shorter than the period of the search.
    * Schedule windows are not recommended for searches that run every minute.
* When set to 0, there is no schedule window. The scheduler starts the search
  as close to its scheduled time as possible.
* When set to "auto," the scheduler calculates the 'schedule_window' value
  automatically.
    * For more information about this calculation, see the search scheduler
      documentation.
* A non-zero 'schedule_window' is mutually exclusive with a non-default
  'schedule_priority'. See 'schedule_priority' for details.
* Default: 0 for searches that are owned by users with the
           'edit_search_schedule_window' capability.
           For these searches, this value can be changed.
* Default: auto for searches that are owned by users that do not have the
           'edit_search_window' capability.
           For these searches, this setting cannot be changed.

Workload management options

workload_pool = <name of workload pool>
* Sets the name of the workload pool to be used by this search.
* There are multiple workload pools defined in the workload_pools.conf file.
  Each workload pool has different resource limits associated with it,
  for example, CPU, Memory, etc.
* The search process of this search is launched into the 'workload_pool'
  specified above.
* The 'workload_pool' used should be defined in the workload_pools.conf file.
* If workload management is enabled and a explicit 'workload_pool' is not specified,
  the 'default_pool' defined in the workload_pools.conf file is used.

Notification options

counttype = number of events | number of hosts | number of sources | custom | always
* Set the type of count for alerting.
* Used with the 'relation' and 'quantity' settings.
* NOTE: If you specify "always," do not set 'relation' or 'quantity'.
* Default: always

relation = greater than | less than | equal to | not equal to | drops by | rises by
* Specifies how to compare against 'counttype'.
* Default: empty string

quantity = <integer>
* Specifies a value for the 'counttype' and 'relation', to determine the condition
  under which an alert is triggered by a saved search.
* Think of it as a sentence constructed like this: <counttype> <relation> <quantity>.
  * For example, "number of events [is] greater than 10" sends an alert when the
    count of events is larger than by 10.
  * For example, "number of events drops by 10%" sends an alert when the count of
    events drops by 10%.
* Default: empty string

alert_condition = <search string>
* Contains a conditional search that is evaluated against the results of the
  saved search. Alerts are triggered if the specified search yields a
  non-empty search result list.
* Default: empty string


#*******
# generic action settings.
# For a comprehensive list of actions and their arguments, refer to the
# alert_actions.conf file.
#*******

action.<action_name> = 0 | 1
* Indicates whether the action is enabled or disabled for a particular saved
  search.
* The 'action_name' can be: email | populate_lookup | script | summary_index
* For more about your defined alert actions see the alert_actions.conf file.
* Default: empty string

action.<action_name>.<parameter> = <value>
* Overrides an action's parameter, defined in the alert_actions.conf file,
  with a new <value> for this saved search only.
* Default: empty string

Settings for email action

action.email = 0 | 1
* Enables or disables the email action.
* Default: 0 (false)

action.email.to = <email list>
* REQUIRED. This setting is not defined in the alert_actions.conf file.
* Set a comma-delimited list of recipient email addresses.
* Default: empty string

* NOTE: When configured in Splunk Web, the following email settings
  are written to this conf file only if their values differ
  from the settings in the alert_actions.conf file.

action.email.from = <email address>
* Set an email address to use as the sender's address.
* Default: splunk@<LOCALHOST>
    (or the 'from' setting in the alert_actions.conf file)

action.email.subject = <string>
* Set the subject of the email delivered to recipients.
* Default: SplunkAlert-<savedsearchname>
    (or the 'subject' setting in the alert_actions.conf file)

action.email.mailserver = <string>
* Set the address of the MTA server to be used to send the emails.
* Defaults to <LOCALHOST>
    (or the 'mailserver' setting in alert_actions.conf file)

action.email.maxresults = <integer>
* Set the maximum number of results to email.
* Any alert-level results threshold greater than this number is capped at
  this level.
* This value affects all methods of result inclusion by email alert: inline,
  CSV, and PDF.
* NOTE: This setting is affected globally by the 'maxresults' setting in
  the [email] stanza of the alert_actions.conf file.
* Default: 10000

action.email.include.results_link = [1|0]
* Specify whether to include a link to search results in the
  alert notification email.
* Default: 1 (true)
    (or the 'include.result.link' setting in the alert_actions.conf file)

action.email.include.search = [1|0]
* Specify whether to include the query whose results triggered the email.
* Default: 0 (false)
    (or the 'include.search' setting in the alert_actions.conf file)

action.email.include.trigger = [1|0]
* Specify whether to include the alert trigger condition.
* Default: 0 (false)
    (or the 'include.trigger' setting in the alert_actions.conf file)

action.email.include.trigger_time = [1|0]
* Specify whether to include the alert trigger time.
* Default: 0 (false) or whatever is set in the alert_actions.conf file

action.email.include.view_link = [1|0]
* Specify whether to include saved search title and a link for editing
  the saved search.
* Default: 1 (true)
    (or the 'include.view_link' setting in the alert_actions.conf file)

action.email.inline = [1|0]
* Specify whether to include search results in the body of the
  alert notification email.
* Default: 0 (false)
    (or the 'inline' setting in the alert_actions.conf file)

action.email.sendcsv = [1|0]
* Specify whether to send results as a CSV file.
* Default: 0
    (or the 'sendcsv' setting in the alert_actions.conf file)

action.email.sendpdf = [1|0]
* Specify whether to send results as a PDF file.
* Default: 0 (false)
    (or the 'sendpdf' setting in the alert_actions.conf file)

action.email.sendresults = [1|0]
* Specify whether to include search results in the
  alert notification email.
* Default: 0 (false)
    (or the 'sendresults' setting in the alert_actions.conf file)

Settings for script action

action.script = 0 | 1
* Enables or disables the script action.
* Specify 1 to enable, 0 to disable.
* Default: 0 (false)

action.script.filename = <script filename>
* The filename, with no path, of the shell script to run.
* The script should be located in: $SPLUNK_HOME/bin/scripts/
* For system shell scripts on UNIX, or .bat or .cmd file on Windows, there
  are no further requirements.
* For other types of scripts, the first line should begin with a #!
  marker, followed by a path to the interpreter that will run the
  script.
  * Example: #!C:\Python27\python.exe
* Default: empty string

Settings for lookup action

action.lookup = 0 | 1
* Enables or disables the lookup action.
* Specify 1 to enable, 0 to disable.
* Default: 0 (false)

action.lookup.filename = <lookup filename>
* Provide the name of the CSV lookup file to write search results to.
  Do not provide a file path.
* Lookup actions can only be applied to CSV lookups.

action.lookup.append = 0 | 1
* Specify whether to append results to the lookup file defined for the
  'action.lookup.filename' setting.
* Default: 0 (false)

Settings for summary index action

action.summary_index = 0 | 1
* Enables or disables the summary index action.
* Specify 1 to enable, 0 to disable.
* Default: 0

action.summary_index._name = <index>
* Specifies the name of the summary index where the results of the scheduled
  search are saved.
* Default: summary

action.summary_index.inline = <boolean>
* Specify whether to run the summary indexing action as part of the
  scheduled search.
* NOTE: This option is considered only if the summary index action is enabled
  and is always run (in other words, if 'counttype = always').
* Default: 1 (true)

action.summary_index.<field> = <string>
* Specifies a field/value pair to add to every event that gets summary indexed
  by this search.
* You can define multiple field/value pairs for a single summary index search.

action.summary_index.force_realtime_schedule = <boolean>
* By default 'realtime_schedule' is false for a report configured for
  summary indexing. Set this attribute to 'true' or '1' to override the
  default behavior.
* CAUTION: Setting this to 'true' can cause gaps in summary data as a realtime_schedule
  search is skipped if search concurrency limits are violated.
* Default: 0 (false)

Settings for lookup table population parameters

action.populate_lookup = 0 | 1
* Enables or disables the lookup population action.
* Specify 1 to enable, 0 to disable.
* Default: 0

action.populate_lookup.dest = <string>
* Can be one of the following two options:
  * A lookup name from transforms.conf. The lookup name cannot be associated
    with KV store.
  * A path to a lookup .csv file that the search results should be copied to,
    relative to $SPLUNK_HOME.
    * NOTE: This path must point to a .csv file in either of the following
            directories:
      * etc/system/lookups/
      * etc/apps/<app-name>/lookups
      * NOTE: the destination directories of the above files must already exist.
* Default: empty string

run_on_startup = <boolean>
* Specifies whether this search runs when the Splunk platform starts
  or any edit that changes search related arguments happen. This includes search
  and dispatch.* arguments.
* If set to "true", the search is run as soon as possible during startup or after
  edit. Otherwise the search is run at the next scheduled time.
* Set 'run_on_startup' to "true" for scheduled searches that populate
  lookup tables or generate artifacts used by dashboards.
* Default: false

run_n_times = <unsigned integer>
* Runs this search exactly the specified number of times. The search is not run
  again until the Splunk platform is restarted.
* Default: 0 (infinite).

dispatch search options

dispatch.ttl = <integer>[p]
* Indicates the time to live (ttl), in seconds, for the artifacts of the
  scheduled search, if no actions are triggered.
* If the integer is followed by the letter 'p', the ttl is calculated as a
  multiple of the execution period for the scheduled search.
  For example, if the search is scheduled to run hourly and ttl is set to 2p,
  the ttl of the artifacts is set to 2 hours.
* If an action is triggered, the ttl is changed to the ttl for the action. If
  multiple actions are triggered, the action with the largest ttl is applied
  to the artifacts. To set the ttl for an action, refer to the
  alert_actions.conf.spec file.
* For more information on the ttl for a search, see the limits.conf.spec file
  [search] stanza ttl setting.
* Default: 2p, which is 2 times the period of the scheduled search

dispatch.buckets  = <integer>
* The maximum number of timeline buckets.
* Default: 0

dispatch.max_count = <integer>
* The maximum number of results before finalizing the search.
* Default: 500000

dispatch.max_time = <integer>
* The maximum amount of time, in seconds, before finalizing the search.
* Default: 0

dispatch.lookups = 1| 0
* Enables or disables lookups for this search.
* Specify 1 to enable, 0 to disable.
* Default: 1

dispatch.earliest_time = <time-str>
* Specifies the earliest time for this search. Can be a relative or absolute
  time.
* If this value is an absolute time, use the 'dispatch.time_format' setting
  to format the value.
* Default: empty string

dispatch.latest_time = <time-str>
* Specifies the latest time for this saved search. Can be a relative or
  absolute time.
* If this value is an absolute time, use the 'dispatch.time_format' setting
  to format the value.
* Default: empty string

dispatch.index_earliest= <time-str>
* Specifies the earliest index time for this search. Can be a relative or
  absolute time.
* If this value is an absolute time, use the 'dispatch.time_format setting
  to format the value.
* Defaults to empty string.

dispatch.index_latest= <time-str>
* Specifies the latest index time for this saved search. Can be a relative or
  absolute time.
* If this value is an absolute time, use the 'dispatch.time_format' setting
  to format the value.
* Default: empty string

dispatch.time_format = <time format str>
* Defines the time format that is used to specify the earliest and latest
  time.
* Default: %FT%T.%Q%:z

dispatch.spawn_process = 1 | 0
* Specifies whether a new search process is started when this saved search
  is run.
* Default: 1 (true)

dispatch.auto_cancel = <integer>
* Specifies the amount of inactive time, in seconds, after which the job
  is automatically canceled.
* 0 means to never auto-cancel the job.
* Default: 0

dispatch.auto_pause = <integer>
* Specifies the amount of inactive time, in seconds, after which the
  search job is automatically paused.
* 0 means to never auto-pause the job.
* To restart a paused search job, specify 'unpause' as an action to POST
  search/jobs/{search_id}/control.
* auto_pause only goes into effect once. Unpausing after auto_pause does not
  put auto_pause into effect again.
* Default: 0

dispatch.reduce_freq = <integer>
* Specifies the frequency, in number of intermediary results chunks, that
  the MapReduce reduce phase should run on the accumulated map values.
* Default: 10

dispatch.rt_backfill = <boolean>
* Specifies whether to do real-time window backfilling for scheduled real-time
  searches.
* Default: false

dispatch.indexedRealtime = <boolean>
* Specifies whether to use 'indexed-realtime' mode when doing real-time searches.
* Overrides the setting in the limits.conf file for the
  'indexed_realtime_use_by_default' setting in the [realtime] stanza.
* This setting applies to each job.
* See the [realtime] stanza in the limits.conf.spec file for more information.
* Default: The value for 'indexed_realtime_use_by_default' in the limits.conf file

dispatch.indexedRealtimeOffset = <integer>
* Controls the number of seconds to wait for disk flushes to finish.
* Overrides the setting in the limits.conf file for the
  'indexed_realtime_disk_sync_delay' setting in the [realtime] stanza.
* This setting applies to each job.
* See the [realtime] stanza in the limits.conf.spec file for more information.
* Default: The value for 'indexed_realtime_disk_sync_delay' in the limits.conf file

dispatch.indexedRealtimeMinSpan = <integer>
* Minimum seconds to wait between component index searches.
* Overrides the setting in the limits.conf file for the
  'indexed_realtime_default_span' setting in the [realtime] stanza.
* This setting applies to each job.
* See the [realtime] stanza in the limits.conf.spec file for more information.
* Default: The value for 'indexed_realtime_default_span' in the limits.conf file

dispatch.rt_maximum_span = <integer>
* The max seconds allowed to search data which falls behind realtime.
* Use this setting to set a limit, after which events are not longer considered
  for the result set. The search catches back up to the specified delay from
  realtime and uses the default span.
* Overrides the setting in the limits.conf file for the
  'indexed_realtime_maximum_span' setting in the [realtime] stanza.
* This setting applies to each job.
* See the [realtime] stanza in the limits.conf.spec file for more information.
* Default: the value for 'indexed_realtime_maximum_span' in the limits.conf file

dispatch.sample_ratio = <integer>
* The integer value used to calculate the sample ratio. The formula is 1 / <integer>.
* The sample ratio specifies the likelihood of any event being included in the sample.
* For example, if sample_ratio = 500, each event has a 1/500 chance of being
  included in the sample result set.
* Default: 1

restart_on_searchpeer_add = 1 | 0
* Specifies whether to restart a real-time search managed by the scheduler when
  a search peer becomes available for this saved search.
* NOTE: The peer can be a newly added peer or a peer that has been down and has
        become available.
* Default: 1 (true)

auto summarization options

auto_summarize  = <boolean>
* Specifies if the scheduler should ensure that the data for this search is
  automatically summarized.
* Default: false

auto_summarize.command = <string>
* A search template to use to construct the auto summarization for this
  search.
* DO NOT change unless you know what you're doing

auto_summarize.timespan = <time-specifier> (, <time-specifier>)*
* Comma delimited list of time ranges that each summarized chunk should span.
  This comprises the list of available granularity levels for which summaries
  would be available. For example, a timechart over the last month whose
  granularity is at the day level should set this to "1d". If you need
  the same data summarized at the hour level because you need to have weekly
  charts then use: "1h;1d".

auto_summarize.cron_schedule = <cron-string>
* Cron schedule to use to probe or generate the summaries for this search.

auto_summarize.dispatch.<arg-name> = <string>
* Any dispatch.* options that need to be overridden when running the summary
  search.

auto_summarize.suspend_period = <time-specifier>
* The amount of time to suspend summarization of this search if the summarization
  is deemed unhelpful.
* Default: 24h

auto_summarize.max_summary_size = <unsigned integer>
* The minimum summary size when to start testing it's helpfulness.
* Default: 52428800 (5MB)

auto_summarize.max_summary_ratio = <positive decimal>
* The maximum ratio of summary_size/bucket_size when to stop summarization and
  deem it unhelpful for a bucket.
* NOTE: The test is only performed if the summary size is larger
  than the 'auto_summarize.max_summary_size' setting.
* Default: 0.1

auto_summarize.max_disabled_buckets = <unsigned integer>
* The maximum number of buckets with the suspended summarization before the
  summarization search is completely stopped and the summarization of the
  search is suspended for the value specified in the
  'auto_summarize.suspend_period' setting.
* Default: 2

auto_summarize.max_time = <unsigned integer>
* The maximum amount of time that the summary search is allowed to run.
* NOTE: This is an approximate time and the summarize search will be stopped at
  clean bucket boundaries.
* Default: 3600

auto_summarize.hash = <string>
* An auto generated setting.

auto_summarize.normalized_hash = <string>
* An auto generated setting.

auto_summarize.max_concurrent = <unsigned integer>
* The maximum number of concurrent instances of this auto summarizing search,
  that the scheduler is allowed to run.
* Defaults: 1

auto_summarize.workload_pool = <name of workload pool>
* Sets the name of the workload pool to be used by this auto summarization.
* There are multiple workload pools defined in workload_pools.conf.
  Each workload pool has different resource limits associated with it,
  for example, CPU, Memory, etc.
* The search process of this auto summarization will be launched into the
  workload_pool specified above.
* The workload_pool used should be defined in workload_pools.conf.
* If workload management is enabled and an explicit workload_pool is not specified,
  the workload rules defined in workload_rules.conf will try to put the search
  into a proper pool as specified in some rule. If there is no rule defined for this
  search, the default_pool defined in workload_pools.conf will be used.

alert suppression/severity/expiration/tracking/viewing settings

alert.suppress = 0 | 1
* Specifies whether alert suppression is enabled for this scheduled search.
* Default: 0 (false)

alert.suppress.period = <time-specifier>
* Sets the suppression period. Use [number][time-unit] to specify a time.
* For example: 60 = 60 seconds, 1m = 1 minute, 1h = 60 minutes.
* Honored if and only if 'alert.suppress = 1'.
* Default: empty string

alert.suppress.fields = <comma-delimited-field-list>
* List of fields to use when suppressing per-result alerts. This field *must*
  be specified if the digest mode is disabled and suppression is enabled.
* Default: empty string.

alert.severity = <integer>
* Sets the alert severity level.
* Valid values are: 1-debug, 2-info, 3-warn, 4-error, 5-severe, 6-fatal
* Default: 3

alert.expires = <time-specifier>
* Sets the period of time to show the alert on the Triggered Alerts page.
  * Use [number][time-unit] to specify a time.
  * For example: 60s = 60 seconds, 1m = 1 minute, 1h = 60 minutes = 1 hour etc
* This setting is only honored when 'alert.track = true' (when the "Add to
  Triggered Alerts" action is selected for the alert in Splunk Web).
* This property is valid until splunkd restarts. Restart clears the listing of
  triggered alerts.
* Default: 24h

alert.digest_mode = <boolean>
* Specifies whether Splunk applies the alert actions to the entire result set
  or to each individual result.
* Default: true

alert.track = <boolean> | auto
* Specifies whether to track the actions triggered by this scheduled search.
  * auto - determine whether to track or not based on the tracking setting of
    each action, do not track scheduled searches that always trigger actions.
  * true - force alert tracking.
  * false - disable alert tracking for this search.
* Default: auto

alert.display_view = <string>
* Name of the UI view where the emailed link for each result alerts should point to.
* If not specified, the value of the 'request.ui_dispatch_app' setting is used.
  If the 'request.ui_dispatch_app' setting is missing then "search" is used.
* Default: empty string

alert.managedBy = <string>
* Specifies the feature or component that created the alert.
* Default: empty string

UI-specific settings

displayview =<string>
* Defines the default UI view name (not label) in which to load the results.
* Accessibility is subject to the user having sufficient permissions.
* Default: empty string

vsid = <string>
* Defines the view state ID associated with the UI view listed in the
  'displayview' setting.
* Must match up to a stanza in the viewstates.conf file.
* Default: empty string

is_visible = <boolean>
* Specifies whether this saved search should be listed in the visible saved
  search list within apps.
* Saved searches are still visible when accessing the "Searches, reports,
  and alerts" page in Splunk Web.
* Default: true

description = <string>
* Human-readable description of this saved search.
* Default: empty string

request.ui_dispatch_app  = <string>
* Specifies a field used by Splunk UI to denote the app that this search
  should be dispatched in.
* Default: empty string

request.ui_dispatch_view = <string>
* Specifies a field used by Splunk UI to denote the view this search should be
  displayed in.
* Default: empty string

Display Formatting Options

# General options
display.general.enablePreview = 0 | 1
display.general.type = [events|statistics|visualizations]
display.general.timeRangePicker.show = 0 | 1
display.general.migratedFromViewState = 0 | 1
display.general.locale = <string>

# Event options
display.events.fields = [<string>(, <string>)*]
display.events.type = [raw|list|table]
display.events.rowNumbers = 0 | 1
display.events.maxLines = <integer>
display.events.raw.drilldown = [inner|outer|full|none]
display.events.list.drilldown = [inner|outer|full|none]
display.events.list.wrap = 0 | 1
display.events.table.drilldown = 0 | 1
display.events.table.wrap = 0 | 1

# Statistics options
display.statistics.rowNumbers = 0 | 1
display.statistics.wrap = 0 | 1
display.statistics.overlay = [none|heatmap|highlow]
display.statistics.drilldown = [row|cell|none]
display.statistics.totalsRow = 0 | 1
display.statistics.percentagesRow = 0 | 1
display.statistics.show = 0 | 1

# Visualization options
display.visualizations.trellis.enabled = 0 | 1
display.visualizations.trellis.scales.shared = 0 | 1
display.visualizations.trellis.size = [small|medium|large]
display.visualizations.trellis.splitBy = <string>
display.visualizations.show = 0 | 1
display.visualizations.type = [charting|singlevalue|mapping|custom]
display.visualizations.chartHeight = <integer>
display.visualizations.charting.chart = [line|area|column|bar|pie|scatter|bubble|radialGauge|fillerGauge|markerGauge]
display.visualizations.charting.chart.stackMode = [default|stacked|stacked100]
display.visualizations.charting.chart.nullValueMode = [gaps|zero|connect]
display.visualizations.charting.chart.overlayFields = <string>
display.visualizations.charting.drilldown = [all|none]
display.visualizations.charting.chart.style = [minimal|shiny]
display.visualizations.charting.layout.splitSeries = 0 | 1
display.visualizations.charting.layout.splitSeries.allowIndependentYRanges = 0 | 1
display.visualizations.charting.legend.mode = [standard|seriesCompare]
display.visualizations.charting.legend.placement = [right|bottom|top|left|none]
display.visualizations.charting.legend.labelStyle.overflowMode = [ellipsisEnd|ellipsisMiddle|ellipsisStart]
display.visualizations.charting.axisTitleX.text = <string>
display.visualizations.charting.axisTitleY.text = <string>
display.visualizations.charting.axisTitleY2.text = <string>
display.visualizations.charting.axisTitleX.visibility = [visible|collapsed]
display.visualizations.charting.axisTitleY.visibility = [visible|collapsed]
display.visualizations.charting.axisTitleY2.visibility = [visible|collapsed]
display.visualizations.charting.axisX.scale = linear|log
display.visualizations.charting.axisY.scale = linear|log
display.visualizations.charting.axisY2.scale = linear|log|inherit
display.visualizations.charting.axisX.abbreviation = none|auto
display.visualizations.charting.axisY.abbreviation = none|auto
display.visualizations.charting.axisY2.abbreviation = none|auto
display.visualizations.charting.axisLabelsX.majorLabelStyle.overflowMode = [ellipsisMiddle|ellipsisNone]
display.visualizations.charting.axisLabelsX.majorLabelStyle.rotation = [-90|-45|0|45|90]
display.visualizations.charting.axisLabelsX.majorUnit = <decimal> | auto
display.visualizations.charting.axisLabelsY.majorUnit = <decimal> | auto
display.visualizations.charting.axisLabelsY2.majorUnit = <decimal> | auto
display.visualizations.charting.axisX.minimumNumber = <decimal> | auto
display.visualizations.charting.axisY.minimumNumber = <decimal> | auto
display.visualizations.charting.axisY2.minimumNumber = <decimal> | auto
display.visualizations.charting.axisX.maximumNumber = <decimal> | auto
display.visualizations.charting.axisY.maximumNumber = <decimal> | auto
display.visualizations.charting.axisY2.maximumNumber = <decimal> | auto
display.visualizations.charting.axisY2.enabled = 0 | 1
display.visualizations.charting.chart.sliceCollapsingThreshold = <decimal>
display.visualizations.charting.chart.showDataLabels = [all|none|minmax]
display.visualizations.charting.gaugeColors = [<hex>(, <hex>)*]
display.visualizations.charting.chart.rangeValues = [<string>(, <string>)*]
display.visualizations.charting.chart.bubbleMaximumSize = <integer>
display.visualizations.charting.chart.bubbleMinimumSize = <integer>
display.visualizations.charting.chart.bubbleSizeBy = [area|diameter]
display.visualizations.charting.fieldColors = <string>
display.visualizations.charting.fieldDashStyles = <string>
display.visualizations.charting.lineWidth = <decimal>
display.visualizations.custom.drilldown = [all|none]
display.visualizations.custom.height = <integer>
display.visualizations.custom.type = <string>
display.visualizations.singlevalueHeight = <integer>
display.visualizations.singlevalue.beforeLabel = <string>
display.visualizations.singlevalue.afterLabel = <string>
display.visualizations.singlevalue.underLabel = <string>
display.visualizations.singlevalue.unit = <string>
display.visualizations.singlevalue.unitPosition = [before|after]
display.visualizations.singlevalue.drilldown = [all|none]
display.visualizations.singlevalue.colorMode = [block|none]
display.visualizations.singlevalue.rangeValues = [<string>(, <string>)*]
display.visualizations.singlevalue.rangeColors = [<string>(, <string>)*]
display.visualizations.singlevalue.trendInterval = <string>
display.visualizations.singlevalue.trendColorInterpretation = [standard|inverse]
display.visualizations.singlevalue.showTrendIndicator = 0 | 1
display.visualizations.singlevalue.showSparkline = 0 | 1
display.visualizations.singlevalue.trendDisplayMode = [percent|absolute]
display.visualizations.singlevalue.colorBy = [value|trend]
display.visualizations.singlevalue.useColors = 0 | 1
display.visualizations.singlevalue.numberPrecision = [0|0.0|0.00|0.000|0.0000]
display.visualizations.singlevalue.useThousandSeparators = 0 | 1
display.visualizations.mapHeight = <integer>
display.visualizations.mapping.type = [marker|choropleth]
display.visualizations.mapping.drilldown = [all|none]
display.visualizations.mapping.map.center = (<decimal>,<decimal>)
display.visualizations.mapping.map.zoom = <integer>
display.visualizations.mapping.map.scrollZoom = 0 | 1
display.visualizations.mapping.map.panning    = 0 | 1
display.visualizations.mapping.choroplethLayer.colorMode = [auto|sequential|divergent|categorical]
display.visualizations.mapping.choroplethLayer.maximumColor = <string>
display.visualizations.mapping.choroplethLayer.minimumColor = <string>
display.visualizations.mapping.choroplethLayer.colorBins = <integer>
display.visualizations.mapping.choroplethLayer.neutralPoint = <decimal>
display.visualizations.mapping.choroplethLayer.shapeOpacity = <decimal>
display.visualizations.mapping.choroplethLayer.showBorder = 0 | 1
display.visualizations.mapping.markerLayer.markerOpacity = <decimal>
display.visualizations.mapping.markerLayer.markerMinSize = <integer>
display.visualizations.mapping.markerLayer.markerMaxSize = <integer>
display.visualizations.mapping.legend.placement = [bottomright|none]
display.visualizations.mapping.data.maxClusters = <integer>
display.visualizations.mapping.showTiles = 0 | 1
display.visualizations.mapping.tileLayer.tileOpacity = <decimal>
display.visualizations.mapping.tileLayer.url = <string>
display.visualizations.mapping.tileLayer.minZoom = <integer>
display.visualizations.mapping.tileLayer.maxZoom = <integer>

# Patterns options
display.page.search.patterns.sensitivity = <decimal>

# Page options
display.page.search.mode = [fast|smart|verbose]
* This setting has no effect on saved search execution when dispatched by the
  scheduler. It only comes into effect when the search is opened in the UI and
  run manually.

display.page.search.timeline.format = [hidden|compact|full]
display.page.search.timeline.scale = [linear|log]
display.page.search.showFields = 0 | 1
display.page.search.tab = [events|statistics|visualizations|patterns]
# Deprecated
display.page.pivot.dataModel = <string>

Table format settings

# Format options
display.statistics.format.<index> = [color|number]
display.statistics.format.<index>.field = <string>
display.statistics.format.<index>.fields = [<string>(, <string>)*]

# Color format options
display.statistics.format.<index>.scale = [category|linear|log|minMidMax|sharedCategory|threshold]
display.statistics.format.<index>.colorPalette = [expression|list|map|minMidMax|sharedList]

# Number format options
display.statistics.format.<index>.precision = <integer>
display.statistics.format.<index>.useThousandSeparators = <boolean>
display.statistics.format.<index>.unit = <string>
display.statistics.format.<index>.unitPosition = [before|after]

# Scale options for 'category'
display.statistics.format.<index>.scale.categories = [<string>(, <string>)*]

# Scale options for 'log'
display.statistics.format.<index>.scale.base = <integer>

# Scale options for 'minMidMax'
display.statistics.format.<index>.scale.minType = [number|percent|percentile]
display.statistics.format.<index>.scale.minValue = <decimal>
display.statistics.format.<index>.scale.midType = [number|percent|percentile]
display.statistics.format.<index>.scale.midValue = <decimal>
display.statistics.format.<index>.scale.maxType = [number|percent|percentile]
display.statistics.format.<index>.scale.maxValue = <decimal>

# Scale options for 'threshold'
display.statistics.format.<index>.scale.thresholds = [<decimal>(, <decimal>)*]

# Color palette options for 'expression'
display.statistics.format.<index>.colorPalette.rule = <string>

# Color palette options for 'list'
display.statistics.format.<index>.colorPalette.colors = [<hex>(, <hex>)*]
display.statistics.format.<index>.colorPalette.interpolate = <boolean>

# Color palette options for 'map'
display.statistics.format.<index>.colorPalette.colors = {<string>:<hex>(, <string>:<hex>)*}

# Color palette options for 'minMidMax'
display.statistics.format.<index>.colorPalette.minColor = <hex>
display.statistics.format.<index>.colorPalette.midColor = <hex>
display.statistics.format.<index>.colorPalette.maxColor = <hex>

Other settings

embed.enabled = 0 | 1
* Specifies whether a saved search is shared for access with a guestpass.
* Search artifacts of a search can be viewed using a guestpass only if:
  * A token has been generated that is associated with this saved search.
    The token is associated with a particular user and app context.
  * The user to whom the token belongs has permissions to view that search.
  * The saved search has been scheduled and there are artifacts available.
    Only artifacts are available using guestpass. A search is never dispatched.
  * The saved search is not disabled, it is scheduled.
  * The saved search is not real-time.
  * The saved search is not an alert.

defer_scheduled_searchable_idxc = <boolean>
* Specifies whether to defer a continuous saved search during a searchable
  rolling restart or searchable rolling upgrade of an indexer cluster.
* Note: When disabled, a continuous saved search might return partial results.
* Default: true (enabled)

# DFS options
federated.provider = <federated-provider-stanza>
* Identifies the federated provider where this search has to run.
* Select a federated provider stanza defined in your federated.conf file.
* No default.

Deprecated settings

sendresults = <boolean>
* Use the 'action.email.sendresult' setting.

action_rss = <boolean>
* Use the 'action.rss' setting.

action_email = <string>
* Use the 'action.email' and 'action.email.to' settings.

role = <string>
* See saved search permissions.

userid = <string>
* See saved search permissions.

query = <string>
* use the 'search' setting.

nextrun  = <integer>
* Not used anymore, the scheduler maintains this info internally.

qualifiedSearch = <string>
* Not used anymore, Splunk software computes this value during runtime.

savedsearches.conf.example

#   Version 8.0.10
#
# This file contains example saved searches and alerts.
#
# To use one or more of these configurations, copy the configuration block into
# savedsearches.conf in $SPLUNK_HOME/etc/system/local/. You must restart Splunk
# to enable configurations.
#
# To learn more about configuration files (including precedence) please see the
# documentation located at
# http://docs.splunk.com/Documentation/Splunk/latest/Admin/Aboutconfigurationfiles


# The following searches are example searches.  To create your own search,
# modify the values by following the spec outlined in savedsearches.conf.spec.


[Daily indexing volume by server]
search = index=_internal todaysBytesIndexed LicenseManager-Audit NOT source=*web_service.log NOT source=*web_access.log | eval Daily
_Indexing_Volume_in_MBs = todaysBytesIndexed/1024/1024 | timechart avg(Daily_Indexing_Volume_in_MBs) by host
dispatch.earliest_time = -7d

[Errors in the last 24 hours]
search = error OR failed OR severe OR ( sourcetype=access_* ( 404 OR 500 OR 503 ) )
dispatch.earliest_time = -1d

[Errors in the last hour]
search = error OR failed OR severe OR ( sourcetype=access_* ( 404 OR 500 OR 503 ) )
dispatch.earliest_time = -1h

[KB indexed per hour last 24 hours]
search = index=_internal metrics group=per_index_thruput NOT debug NOT sourcetype=splunk_web_access | timechart fixedrange=t span=1h
 sum(kb) | rename sum(kb) as totalKB
dispatch.earliest_time = -1d

[Messages by minute last 3 hours]
search = index=_internal eps "group=per_source_thruput" NOT filetracker | eval events=eps*kb/kbps | timechart fixedrange=t span=1m s
um(events) by series
dispatch.earliest_time = -3h

[Splunk errors last 24 hours]
search = index=_internal " error " NOT debug source=*/splunkd.log*
dispatch.earliest_time = -24h

## Federated Datasets
[search-sf-usage]
search = search index=sf_index | stats count by user
federated.provider = deployment-sf-search

[search-sf-hr]
search = | union [search index=sf_index] [search index=hr_index] | stats count by user
federated.provider = deployment-sf-hr

[search-sr]
search = search index=sr_index | join left=L right=R L.user=R.group [ search index=hr_index]
federated.provider = deployment-sr-search