Splunk® Universal Forwarder

Forwarder Manual

This documentation does not apply to the most recent version of Splunk® Universal Forwarder. For documentation on the most recent version, go to the latest release.

Configure the universal forwarder

Before a forwarder can forward data, it must have a configuration. A configuration:

  • Tells the forwarder what data to send.
  • Tells it where to send the data.

Because the universal forwarder does not have Splunk Web, you must give the forwarder a configuration either during the installation (on Windows systems only) or later, as a separate step. To perform post-installation configuration, you can:

  • Use the CLI. The CLI lets you do nearly all configuration in a small number of steps, but does not give you full access to the feature set of the forwarder.
  • Create or modify configuration files on the forwarder directly.
  • Use a deployment server. The deployment server can ease distribution of configurations, but does not make a forwarder forward data by itself. You must use the deployment server to deliver configurations to the forwarders so that they collect the data you want and send it to the place you want.

About configuring the universal forwarder with configuration files

Configuration files are text files that the universal forwarder reads when it starts up or when you reload a configuration. Forwarders must read configuration files to know where to get and send data. These files give you full access to the forwarder feature set, but editing configuration files can be difficult or mistake-prone at times. See "About configuration files" and "Configuration file precedence" in the Splunk Enterprise Admin manual, for details on how configuration files work.

Key configuration files are:

You make changes to configuration files by editing them with a text editor. You can use any editor that you want as long as it can write files in ASCII/UTF-8 format.

The forwarder works with configurations for forwarding data in outputs.conf in $SPLUNK_HOME/etc/system/local/). See Configure forwarding with outputs.conf.

The universal forwarder has a SplunkUniversalForwarder app, which includes preconfigured settings that let the forwarder run in a streamlined mode. Do not edit any configuration files within that app unless you receive specific instructions.

Best practices for deploying configuration updates across universal forwarders

You can use the following methods to deploy configuration updates across your set of universal forwarders:

  • Edit or copy the configuration files for each universal forwarder manually (This is only useful for small deployments.)
  • Use the Splunk deployment server to push configured apps to your set of universal forwarders.
  • Use your own deployment tools (puppet or Chef on *nix or System Center Configuration Manager on Windows) to push configuration changes.

Configure the universal forwarder from the CLI

The CLI lets you configure most forwarding parameters without having to edit configuration files. It does not give you full access to all forwarding parameters, and you must edit configuration files in those cases.

When you make configuration changes with the CLI, the universal forwarder writes the configuration files. This prevents typos and other mistakes that can occur when you edit configuration files directly.

The forwarder writes configurations for forwarding data to outputs.conf in $SPLUNK_HOME/etc/system/local/). See Configure forwarding with outputs.conf, for information on outputs.conf.

Examples for using the CLI to configure a universal forwarder

Following are example procedures on how to configure a universal forwarder to connect to a receiving indexer.

Configure the universal forwarder to connect to a receiving indexer

From a shell or command prompt on the forwarder, run the command:

./splunk add forward-server <host name or ip address>:<listening port>

For example, to connect to the receiving indexer with the hostname idx.mycompany.com and that host listens on port 9997 for forwarders, type in:

./splunk add forward-server idx1.mycompany.com:9997

Configure the universal forwarder to connect to a deployment server

From a shell or command prompt on the forwarder, run the command:

./splunk set deploy-poll <host name or ip address>:<management port>

For example, if you want to connect to the deployment server with the hostname ds1.mycompany.com on the default management port of 8089, type in:

./splunk set deploy-poll ds1.mycompany.com:8089

Configure a data input on the forwarder

The Splunk Enterprise Getting Data In manual has information on what data a universal forwarder can collect.

1. Determine what data you want to collect.

2. From a shell or command prompt on the forwarder, run the command that enables that data input. For example, to monitor the /var/log directory on the host with the universal forwarder installed, type in:

./splunk add monitor /var/log

The forwarder asks you to authenticate and begins monitoring the specified directory immediately after you log in.

Restart the universal forwarder

Some configuration changes might require that you restart the forwarder.

To restart the universal forwarder, use the same CLI restart command that you use to restart a full Splunk Enterprise instance:

  • On Windows: Go to %SPLUNK_HOME%\bin and run this command:
       splunk restart 
  • On *nix systems: From a shell prompt on the host, go to $SPLUNK_HOME/bin, and run this command:
      ./splunk restart
Last modified on 22 March, 2022
Stop the universal forwarder   Configure forwarding with outputs.conf

This documentation applies to the following versions of Splunk® Universal Forwarder: 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6, 7.3.7, 7.3.8, 7.3.9, 8.0.0, 8.0.1, 8.0.2, 8.0.3, 8.0.4, 8.0.5, 8.0.6, 8.0.7, 8.0.8, 8.0.9, 8.0.10, 8.1.0, 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6, 8.1.7, 8.1.8, 8.1.9, 8.1.10, 8.1.11, 8.1.12, 8.1.13, 8.1.14, 8.2.0, 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5


Was this topic useful?







You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters