How Splunk stores indexes
As Splunk indexes your data, it creates a bunch of files. These files contain two types of data:
- The raw data in compressed form ("rawdata")
- Indexes that point to the raw data ("index files")
Together, these files constitute the Splunk index. The files reside in sets of directories organized by age. Some directories contain newly indexed data; others contain previously indexed data. The number of such directories can grow quite large, depending on how much data you're indexing.
Why you might care
You might not care, actually. Splunk handles indexed data by default in a way that gracefully ages the data through several stages. After a long period of time, typically several years, Splunk removes old data from your system. You might well be fine with the default scheme it uses.
However, if you're indexing large amounts of data, have specific data retention requirements, or otherwise need to carefully plan your aging policy, you've got to read this topic. Also, to back up your data, it helps to know where to find it. So, read on....
How Splunk ages data
Each of the index directories is known as a bucket. To summarize so far:
- A Splunk "index" contains compressed raw data and associated indexes.
- A Splunk index resides across many age-designated index directories.
- An index directory is a bucket.
A bucket moves through several stages as it ages:
As buckets age, they "roll" from one stage to the next. Newly indexed data goes into a hot bucket, which is a bucket that's both searchable and actively being written to. After the hot bucket reaches a certain size, it becomes a warm bucket, and a new hot bucket is created. Warm buckets are searchable, but are not actively written to. There are many warm buckets.
Once Splunk has created some maximum number of warm buckets, it begins to roll the warm buckets to cold based on their age. Always, the oldest warm bucket rolls to cold. Buckets continue to roll to cold as they age in this manner. After a set period of time, cold buckets roll to frozen, at which point they are either archived or deleted. By editing attributes in indexes.conf, you can specify the bucket aging policy, which determines when a bucket moves from one stage to the next.
Here are the stages that buckets age through:
|Hot||Contains newly indexed data. Open for writing. One or more hot buckets for each index.||Yes.|
|Warm||Data rolled from hot. There are many warm buckets.||Yes.|
|Cold||Data rolled from warm. There are many cold buckets.||Yes.|
|Frozen||Data rolled from cold. Splunk deletes frozen data by default, but you can also archive it.||No.|
The collection of buckets in a particular stage is sometimes referred to as a database or "db": the "hot db", the "warm db", the "cold db", etc.
Note: Hot buckets always roll whenever
splunkd gets restarted.
What the index directories look like
Each bucket occupies its own subdirectory within a larger database directory. Splunk organizes the directories to distinguish between hot/warm/cold buckets. In addition, the bucket directory names are based on the age of the data.
Here's the directory structure for the default index (
|Bucket type||Default location||Notes|
|| There can be multiple hot subdirectories. Each hot bucket occupies its own subdirectory, which uses this naming convention:
||There are multiple warm subdirectories. Each warm bucket occupies its own subdirectory, which uses this naming convention:
The timestamps are expressed in UTC epoch time (in seconds). For example:
||There are multiple cold subdirectories. When warm buckets roll to cold, they get moved into this directory, but are not renamed.|
|Frozen||N/A: Data deleted or archived into a directory location you specify.||Deletion is the default; see "Archive indexed data" for information on how to archive the data instead.|
||Location for data that has been archived and later thawed. See "Restore archived data" for information on restoring archived data to a "thawed" state.|
The paths for hot/warm and cold directories are configurable, so you can store cold buckets in a separate location from hot/warm buckets. See "Use multiple partitions for index data".
Caution: All index locations must be writable.
Configure your indexes
You configure indexes in
indexes.conf. You can edit a copy of
$SPLUNK_HOME/etc/system/local/ or in a custom app directory in
$SPLUNK_HOME/etc/apps/. Do not edit the copy in
$SPLUNK_HOME/etc/system/default. For information on configuration files and directory locations, see "About configuration files".
Table of indexes.conf attributes
This table lists the key
indexes.conf attributes affecting buckets and what they configure. It also provides links to other topics (or sections in this topic) that show how to use these attributes. For the most detailed information on these attributes, as well as others, always refer to "indexes.conf".
|Attribute||What it configures||Default||For more information, see ...|
|homePath||The path that contains the hot and warm buckets. (Required.)||
||Use multiple partitions for index data|
|coldPath||The path that contains the cold buckets. (Required.)||
||Use multiple partitions for index data|
|thawedPath||The path that contains any thawed buckets. (Required.)||
||Use multiple partitions for index data|
|maxHotBuckets||The maximum number of hot buckets. This value should be at least 2, to deal with any archival data. The main default index, for example, has this value set to 10.||3, for new, custom indexes.||How Splunk ages data|
|maxDataSize||Determines rolling behavior, hot to warm. The maximum size for a hot bucket. When a hot bucket reaches this size, it rolls to warm. This attribute also determines the approximate size for all buckets.||Depends; see indexes.conf.||Use multiple partitions for index data|
|maxWarmDBCount||Determines rolling behavior, warm to cold. The maximum number of warm buckets. When the maximum is reached, warm buckets begin rolling to cold.||300||Use multiple partitions for index data|
|maxTotalDataSizeMB||Determines rolling behavior, cold to frozen. The maximum size of an index. When this limit is reached, cold buckets begin rolling to frozen.||500000 (MB)||Set a retirement and archiving policy|
|frozenTimePeriodInSecs||Determines rolling behavior, cold to frozen. Maximum age for a bucket, after which it rolls to frozen.||188697600 (in seconds; approx. 6 years)||Set a retirement and archiving policy|
|coldToFrozenDir||Location for archived data. Determines behavior when a bucket rolls from cold to frozen. If set, Splunk will archive frozen buckets into this directory just before deleting them from the index.||If you don't set either this attribute or
||Archive indexed data|
|coldToFrozenScript||Script to run just before a cold bucket rolls to frozen. If you set both this attribute and
||If you don't set either this attribute or
||Archive indexed data|
|Maximum size for
||None||Configure index size according to bucket type|
|maxVolumeDataSizeMB||Maximum size for a volume. If the attribute is missing, the individual volume is not constrained in size.||None||Configure index size with volumes|
Note: You can also configure the path to your indexes in Splunk Manager. Go to Splunk Manager > System settings > General settings. Under the section Index settings, set the field Path to indexes.
Use multiple partitions for index data
Splunk can use multiple disks and partitions for its index data. It's possible to configure Splunk to use many disks/partitions/filesystems on the basis of multiple indexes and bucket types, so long as you mount them correctly and point to them properly from
indexes.conf. However, we recommend that you use a single high performance file system to hold your Splunk index data for the best experience.
If you do use multiple partitions, the most common way to arrange Splunk's index data is to keep the hot/warm buckets on the local machine, and to put the cold bucket on a separate array or disks (for longer term storage). You'll want to run your hot/warm buckets on a machine with with fast read/write partitions, since most searching will happen there. Cold buckets should be located on a reliable array of disks.
Configure multiple partitions
1. Set up partitions just as you'd normally set them up in any operating system.
2. Mount the disks/partitions.
3. Edit indexes.conf to point to the correct paths for the partitions. You set paths on a per-index basis, so you can also set separate partitions for different indexes. Each index has its own
[<index>] stanza, where
<index> is the name of the index. These are the settable path attributes:
homePath = <path on server>
- This is the path that contains the hot and warm databases for the index.
- Caution: The path must be writable.
coldPath = <path on server>
- This is the path that contains the cold databases for the index.
- Caution: The path must be writable.
thawedPath = <path on server>
- This is the path that contains any thawed databases for the index.
How to configure index storage size
You can configure index storage size in a number of ways:
- On a per-index basis
- For hot/warm and cold buckets separately
- Across indexes, with volumes
Caution: While processing indexes, Splunk might occasionally exceed the configured maximums for short periods of time. When setting limits, be sure to factor in some buffer space. Also, note that certain systems, such as most Unix systems, maintain a configurable reserve space on their partitions. You must take that reserve space, if any, into account when determining how large your indexes can grow.
Configure index size for each index
To set the maximum index size on a per-index basis, use the maxTotalDataSizeMB attribute. When this limit is reached, buckets begin rolling to frozen.
Configure index size according to bucket type
To set the maximum size for
homePath (hot/warm bucket storage) or
coldPath (cold bucket storage), use the
# set hot/warm storage to 10,000MB homePath.maxDataSizeMB = 10000 #set cold storage to 5,000MB coldPath.maxDataSizeMB = 5000
maxDataSizeMB attributes can be set globally or for each index. An index-level setting will override a global setting.
maxVolumeDataSizeMB can be used with volumes, described below, to control bucket storage across groups of indexes.
Configure index size with volumes
You can manage disk usage across multiple indexes by creating volumes and specifying maximum data size for them. A volume represents a directory on the file system where indexed data resides.
Volumes can store data from multiple indexes. You would typically use separate volumes for hot/warm and cold buckets. For instance, you can set up one volume to contain the hot/warm buckets for all your indexes, and another volume to contain the cold buckets.
Note: Volumes are only for homePath and coldPath. This feature does not work for thawedPath.
Setting up a volume
To set up a volume, use this syntax:
[volume:<volume_name>] path = <pathname_for_volume>
You can also optionally include a
maxVolumeDataSizeMB attribute, which specfies the maximum size for the volume.
[volume:hot1] path = /mnt/fast_disk maxVolumeDataSizeMB = 100000
The example defines a volume called "hot1", located at
/mnt/fast_disk, with a maximum size of 100,000MB.
Similarly, this stanza defines a volume called "cold1" that uses a maximum of 150,000MB:
[volume:cold1] path = /mnt/big_disk maxVolumeDataSizeMB = 150000
Using a volume
You can now define an index's
coldPath in terms of volumes. For example, using the volumes defined above, you can define two indexes:
[idx1] homePath = volume:hot1/idx1 coldPath = volume:cold1/idx1 [idx2] homePath = volume:hot1/idx2 coldPath = volume:cold1/idx2
You can use volumes to manage index storage space in any way that makes sense to you. Usually, however, volumes correlate to hot/warm and cold buckets, because of the different storage requirements typical when dealing with different bucket types. So, you will probably use some volumes exclusively for designating
homePath (hot/warm buckets) and others for
coldPath (cold buckets).
When a volume containing warm buckets reaches its
maxVolumeDataSizeMB, it starts rolling buckets to cold. When a volume containing cold buckets reaches its
maxVolumeDataSizeMB, it starts rolling buckets to frozen. If a volume contains both warm and cold buckets (which will happen if an index's
coldPath are both set to the same volume), the oldest bucket will be rolled to frozen.
Putting it all together
This example shows how to use the per-index
coldPath.maxDataSizeMB attributes in combination with volumes to maintain fine-grained control over index storage. In particular, it shows how to prevent bursts of data into one index from triggering massive bucket moves from other indexes. The per-index settings can be used to assure that no index will ever occupy more than a specified size, thereby alleviating the concern:
# global settings # Inheritable by all indexes: no hot/warm bucket can exceed 1 TB. # Individual indexes can override this setting. homePath.maxDataSizeMB = 1000000 # volumes [volume:caliente] path = /mnt/fast_disk maxVolumeDataSizeMB = 100000 [volume:frio] path = /mnt/big_disk maxVolumeDataSizeMB = 1000000 # indexes [i1] homePath = volume:caliente/i1 # homePath.maxDataSizeMB is inherited from the global setting coldPath = volume:frio/i1 # coldPath.maxDataSizeMB not specified anywhere: # This results in no size limit - old-style behavior [i2] homePath = volume:caliente/i2 homePath.maxDataSizeMB = 1000 # overrides the global default coldPath = volume:frio/i2 coldPath.maxDataSizeMB = 10000 # limits the size of cold buckets [i3] homePath = /old/style/path homePath.maxDataSizeMB = 1000 coldPath = volume:frio/i3 coldPath.maxDataSizeMB = 10000
Buckets and Splunk administration
When you're administering Splunk, it helps to understand how Splunk stores indexes across buckets. In particular, several admin activities require a good understanding of buckets:
For information on setting a retirement and archiving policy, see "Set a retirement and archiving policy". You can base the retirement policy on either size or age of data.
For information on how to archive your indexed data, see "Archive indexed data". For information on archive signing, see "Configure archive signing". To learn how to restore data from archive, read "Restore archived data".
To learn how to backup your data, read "Back up indexed data". This topic also discusses how to manually roll hot buckets to warm (so that you can then back them up). Also, see "Best practices for backing up" on the Community Wiki.
For information on setting limits on disk usage, see "Set limits on disk usage".
Troubleshoot your buckets
This section tells you how to deal with an assortment of bucket problems.
Recover after a crash
Splunk usually handles crash recovery without your intervention. If an indexer goes down unexpectedly, some recently received data might not be searchable. When you restart Splunk, it will automatically run the
fsck command in the background. This command diagnoses the health of your buckets and rebuilds search data as necessary.
It is highly unlikely that you will need to run
fsck manually. This is a good thing, because to run it manually, you must stop Splunk, and the command can take several hours to complete if your indexes are large. During that time your data will be inaccessible. However, if Splunk Support directs you to run it, the rest of this section tells you how to do so. (Also, you will need to run
fsck manually to perform recovery for any 4.2.x indexers. Only Splunk indexers at version 4.3 or above run it automatically.)
fsck manually, you'll need to first stop Splunk. Then run
fsck against any affected buckets. To run
fsck against buckets in all indexes, use this command:
splunk fsck --repair --all
This will rebuild all types of buckets (hot/warm/cold/thawed) in all indexes.
fsck command only rebuilds buckets created by version 4.2 or later of Splunk.
To learn more about the
fsck command, including a list of all options available, enter:
fsck --repair command can take as long as several hours to run, depending on the size of your indexes. That's why you want to let Splunk run it in the background automatically, if possible. Also, if you can determine that you only need to rebuild a few buckets, you can run the
rebuild command on just those buckets, as described in the next section, "Rebuild a bucket."
If you just want to diagnose the state of your indexes (without taking any immediate remedial action), run
fsck without the
splunk fsck --all
Rebuild a bucket
If the index and metadata files in a bucket (version 4.2 and later) somehow get corrupted, you can rebuild the bucket from the raw data file alone. Use this command:
splunk rebuild <bucket directory>
Splunk automatically deletes the old index and metadata files and rebuilds them. You don't need to delete any files yourself.
Important: You must stop Splunk before running the
A few notes:
- Rebuilding a bucket does not count against your license.
- The time required to rebuild a bucket is slightly less than the time required to index the same data initially.
Recover invalid pre-4.2 hot buckets
A hot bucket becomes an invalid hot (
invalid_hot_<ID>) bucket when Splunk detects that the metadata files (
Sources.data, Hosts.data, SourceTypes.data) are corrupt or incorrect. Incorrect data usually signifies incorrect time ranges; it can also mean that event counts are incorrect.
Splunk ignores invalid hot buckets. Data does not get added to such buckets, and they cannot be searched. Invalid buckets also do not count when determining bucket limit values such as
maxTotalDataSizeMB. This means that invalid buckets do not negatively affect the flow of data through the system, but it also means that they can result in disk storage that exceeds the configured maximum value.
To recover an invalid hot bucket, use the
1. Make backup copies of the metadata files,
Sources.data, Hosts.data, SourceTypes.data.
2. Rebuild the metadata from the raw data information:
./splunk cmd recover-metadata path_to_your_hot_buckets/invalid_hot_<ID>
3. If successful, rename the bucket as it would normally be named.
Rebuild index-level bucket manifests
It is rare that you might have reason to rebuild index-level manifests, but if you need to, Splunk provides a few commands that do just that.
Caution: You should only use these commands if Splunk support directs you to. Do not rebuild the manifests on your own.
The two index-level manifest files are
.bucketManifest file contains a list of all buckets in the index. You might need to rebuild this if, for example, you manually copy a bucket into an index. The
.metaManifest file contains a list of buckets that have contributed to the index-level metadata file.
The following command rebuilds the
.metaManifest files and all
*.data files in the homePath for the main index only. It does not rebuild metadata for individual buckets.
% splunk _internal call /data/indexes/main/rebuild-metadata-and-manifests
If you only want to rebuild the
homePath/*.data files, use this command instead:
% splunk _internal call /data/indexes/main/rebuild-metadata
If you only want to rebuild the
.bucketManifest file, use this command:
% splunk _internal call /data/indexes/main/rebuild-bucket-manifest
You can use the asterisk (*) wildcard to rebuild manifests for all indexes. For example:
% splunk _internal call /data/indexes/*/rebuild-metadata-and-manifests
For more information
Set limits on disk usage
Move the index database
This documentation applies to the following versions of Splunk® Enterprise: 4.3, 4.3.1, 4.3.2, 4.3.3, 4.3.4, 4.3.5, 4.3.6, 4.3.7