Install on AIX
You can install Splunk Enterprise on AIX using a tar file.
Important: The user Splunk is installed as must have permission to read
/dev/urandom or the installation will fail.
If you are upgrading, review "How to upgrade Splunk Enterprise" for instructions and migration considerations before proceeding.
Install Splunk Enterprise
The AIX install comes in tar file form.
When you install with the tar file:
- Splunk Enterprise does not create the
splunkuser automatically. If you want Splunk Enterprise to run as a specific user, you must create the user manually.
- Be sure the disk partition has enough space to hold the uncompressed volume of the data you plan to keep indexed.
- We recommend you use GNU tar to unpack the tar files, as AIX tar can fail to unpack long file names, fail to overwrite files, and other problems. If you must use the system tar, be sure to check the output for error messages.
To install Splunk Enterprise on an AIX system, expand the tar file into an appropriate directory. The default install directory is
For AIX 5.3, check to make sure your service packs are up to date. Splunk Enterprise requires the following service level:
$ oslevel -r 5300-005
Start Splunk Enterprise
Splunk Enterprise can run as any user on the local system. If you run it as a non-root user, make sure that it has the appropriate permissions to read the inputs that you specify. Refer to the instructions for running Splunk Enterprise as a non-root user for more information.
To start Splunk Enterprise from the command line interface, run the following command from
$SPLUNK_HOME/bin directory (where $SPLUNK_HOME is the directory into which you installed Splunk):
By convention, this document uses:
$SPLUNK_HOMEto identify the path to your Splunk installation.
$SPLUNK_HOME/bin/to indicate the location of the command line interface.
Enable automatic starting of Splunk Enterprise at boot time
The AIX version of Splunk does not register itself to auto-start on reboot. However, you can do so by running the following command from the
$SPLUNK_HOME/bin directory at a prompt:
./splunk enable boot-start
This command invokes the following system commands to register Splunk Enterprise and Splunk Web in the System Resource Controller (SRC):
mkssys -G splunk -s splunkd -p <path to splunkd> -u <splunk user> -a _internal_exec_splunkd -S -n 2 -f 9
mkssys -G splunk -s splunkweb -p <path to python> -u <splunk user> -a _internal_exec_splunkweb -S -n 15 -f 9
When you enable automatic boot start, the SRC handles the run state of the Splunk Enterprise service. This means that you must use a different command to start and stop Splunk Enterprise manually:
/usr/bin/startsrc -s splunkdto start Splunk Enterprise.
/usr/bin/stopsrc -s splunkdto stop Splunk Enterprise.
If you attempt to start and stop Splunk Enterprise using the
./splunk [start|stop] method from the
$SPLUNK_HOME directory, the SRC catches the attempt and Splunk Enterprise displays the following message:
Splunk boot-start is enabled. Please use /usr/bin/[startsrc|stopsrc] -s splunkd to [start|stop] Splunk.
To prevent this message from occurring and restore the ability to start and stop Splunk Enterprise from the
$SPLUNK_HOME directory, disable boot start:
./splunk disable boot-start
- For more information on the
mkssyscommand line arguments, see "Mkssys command" (http://publib.boulder.ibm.com/infocenter/pseries/v5r3/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds3/mkssys.htm) on the IBM pSeries and AIX Information Center website.
- For more information on the SRC, see "System resource controller" (https://www-01.ibm.com/support/knowledgecenter/#!/ssw_aix_71/com.ibm.aix.genprogc/src.htm) on the IBM Knowledge Center website.
The first time you start Splunk Enterprise after a new installation, you must accept the license agreement. To start Splunk Enterprise and accept the license in one step:
$SPLUNK_HOME/bin/splunk start --accept-license
Note: There are two dashes before the
For more information, refer to "Splunk Enterprise startup options" in this manual.
Launch Splunk Web and log in
After you start Splunk Enterprise and accept the license agreement,1. In a browser window, access Splunk Web at
hostnameis the host machine.
portis the port you specified during the installation (the default port is 8000).
2. Splunk Web prompts you for login information (default, username
admin and password
changeme) before it launches. If you switch to Splunk Free, you will bypass this logon page in future sessions.
Now that you've installed Splunk Enterprise, what comes next?
Uninstall Splunk Enterprise
To learn how to uninstall Splunk Enterprise, read "Uninstall Splunk Enterprise" in this manual.
Install on FreeBSD
Install on HP-UX
This documentation applies to the following versions of Splunk® Enterprise: 6.0, 6.0.1, 6.0.2, 6.0.3, 6.0.4, 6.0.5, 6.0.6, 6.0.7, 6.0.8, 6.0.9, 6.0.10, 6.0.11, 6.0.12, 6.0.13, 6.0.14, 6.0.15, 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.1.5, 6.1.6, 6.1.7, 6.1.8, 6.1.9, 6.1.10, 6.1.11, 6.1.12, 6.1.13, 6.1.14, 6.2.0, 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5, 6.2.6, 6.2.7, 6.2.8, 6.2.9, 6.2.10, 6.2.11, 6.2.12, 6.2.13, 6.2.14, 6.2.15