Embed scheduled reports
Report embedding lets you bring the results of your reports to large numbers of report stakeholders. With report embedding, you can embed scheduled reports in external (non-Splunk) websites, dashboards, and portals. Embedded reports can display results in the form of event views, tables, charts, maps, single values, or any other visualization type. They use the same formatting as the originating report.
Things to know about embedded reports
You can't embed a report until it is scheduled to run on a regular interval. An embedded report always displays the results from its last scheduled run. So if an embedded report is set up to run every four hours over the past 24 hours, it will always display results for a previous 24 hour period that were obtained within the last four hours. This design reduces load on your Splunk Enterprise instance. This also means that newly embedded reports are blank until their first scheduled run.
Embedded reports do not have all the features of reports as viewed in Splunk Web. For example, embedded reports do not have drilldown functionality, support for workflow actions, table sorting, or field expansion. When embedded reports display table visualizations, those tables are limited to 10 rows. Embedded reports also cannot support real-time searches.
In Splunk Enterprise, your ability to embed scheduled reports is tied to the
embed_report capability. By default this capability is restricted to the Power User role and any role that inherits it, such as the Admin role. A user without this capability cannot enable or disable embedding for a scheduled report.
Once a report is embedded it cannot be edited. You must disable embedding for a report in order to edit it. See "Embed a report," below, for more information.
Important: Before you embed reports you should set up a string value of your choice for the
embedSecret parameter in
server.conf. This will ensure that all of your embedded reports will migrate properly to future versions of Splunk Enterprise. See the subsection "Set the embedSecret parameter for upgrade and migration purposes", below.
Embed a report
If you have the capability to embed reports, you will be able to embed any report that you can see on the Reports listing page.
1. Go to the Reports listing page and locate the report that you would like to embed.
- Note: Before embedding the report you should run it and adjust its result formatting if necessary. Whatever you define here will dictate how the report will display results after you embed it in an external site. You cannot edit embed-enabled reports.
2. To embed the report, click Edit and select Embed.
- Alternatively you can expand the row for the report and click Edit next to 'Embedding.
- If the report is not already scheduled, the Report Must Be Scheduled dialog appears. Click Schedule Report to schedule the report. For more information, see "Schedule reports," in this manual.
- If the report is already scheduled Splunk Enterprise opens the Enable Report Embedding dialog. It also opens this dialog when you schedule the report after encountering the Report Must Be Scheduled dialog.
3. In the Enable Report Embedding dialog, click Enable Embedding to embed the report.
- The Embed dialog appears with a few lines of code that you can paste into an HTML-based web page.
4. Copy the code out of the Embed dialog and paste it into the HTML-based web page into which you want to embed the report.
5. Click Done to close the Embed dialog.
Note: A newly embedded report will not show data or visualizations until its first scheduled run. So if your report is scheduled to run every hour and you embed the report halfway through an hour, you'll have to wait for approximately 30 minutes before it displays anything.
After you embed a report, you can get its embedding code from the Embed dialog whenever you want. There are two ways to open the Embed dialog and get the code. Start by going to the Reports listing page and then:
- Click Edit for the embed-enabled report and select Embed.
- Expand the report's row and click Edit on the "Embedding" line.
You can embed a single report in multiple web pages. It will use the same display formatting as the originating report wherever it appears.
Disable report embedding
There are two reasons you might want to disable embedding for a report:
- You want to edit the report (update its search string or display formatting). Embedded reports cannot be edited.
- If you disable embedding for a report, edit it, and then enable embedding for it again, you will have to wait until the report runs on its schedule to see your changes reflected in the external website(s) in which the report is embedded.
- You want to revoke access to the report via the external website(s) in which it is embedded. .
To disable a report, open the Embed dialog for the report and click Disable embedding.
Configure embedded report functionality
Report embedding can work for users who have the
embed_reports capability associated with their role without any additional
.conf file configuration. However, there are a few configuration settings that Splunk Enterprise administrators should be aware of. The most important of these is
embedSecret, which should be defined in
server.conf before you start embedding reports.
Set the embedSecret parameter for upgrade and migration purposes
Important: This setting is not required for the current version of Splunk Enteprise (6.1.x). It is required for upgrade to the next major release (6.2 or higher) if you have already set up embedded reports. Ideally you should define an
embedSecret value before you embed any reports. Any embedded reports that you set up before you define an
embedSecret value may be broken by the upgrade process, meaning that they will fail to display in the sites in which they are embedded.
When you embed reports, the URLs that are generated to point to the reports in your Splunk Enterprise instance normally can only be used on the search head on which they were generated. If you set a string value for the
embedSecret parameter in
server.conf all search heads in a search head pool can use the same URL.
You can set any string value for
embedSecret. Think of it as a sort of password. The
embedSecret parameter has no value by default.
Bypass SSO authentication if necessary
When Splunk Enterprise embeds a report in an external web page, it makes several HTTP requests to various resources that in some cases may invoke the SSO authentication system. To get around this, you can update the
embed_uri parameter in
web.conf with an alternative URI IP address, host, or port prefix. This hardcodes the path so it always goes through an externally accessible IP address or host name.
Note: If you have set an explicit value for the
root_endpoint parameter in
web.conf you will need to append the
root_endpoint value to whatever you define for
For example if you've set
root_endpoint = /splunkui
and you want to set
http://foobar:8088, then you'll need to append the
root_endpoint value to it like this:
embed_uri = http://foobar:8088/splunkui
By default the
embed_uri parameter is empty. It will resolve to the client browser
window.location.protocol + "//" + window.location.host.
By default embedded reports will display a footer that includes the Splunk logo. You can change this to a text string if you'd like. Go to the
embed_footer parameter in
web.conf and enter a different string. You can't use HTML markup.
While the default setting of
embed_footer = splunk> displays the Splunk logo as the footer, you can't use this parameter to insert alternative icons or images.
Disable report embedding globally
You can disable report embedding for all users of a particular Splunk Enterprise instance. In
server.conf, change the value of the
allowEmbedTokenAuth parameter from
The embed.enabled parameter
The saved searches endpoint adds the
embed.enabled parameter to scheduled report stanzas in
savedsearches.conf when those reports are embedded. The
embed.enabled parameter determines whether or not a given report is enabled for embedding. It is set to
1 if it is enabled.
Configure the priority of scheduled reports
This documentation applies to the following versions of Splunk® Enterprise: 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.1.5, 6.1.6, 6.1.7, 6.1.8, 6.1.9, 6.1.10, 6.1.11, 6.1.12, 6.1.13, 6.2.0, 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5, 6.2.6, 6.2.7, 6.2.8, 6.2.9, 6.2.10, 6.2.11, 6.2.12, 6.2.13, 6.2.14, 6.2.15, 6.3.0, 6.3.1, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.3.7, 6.3.8, 6.3.9, 6.3.10, 6.3.11, 6.3.12, 6.3.13, 6.3.14