anomalies command to look for events or field values that are unusual or unexpected.
anomalies command assigns an unexpectedness score to each event and places that score in a new field named
unexpectedness. Whether the event is considered anomalous or not depends on a
threshold value. The
threshold value is compared to the unexpectedness score. The event is considered unexpected or anomalous if the unexpectedness score is greater than the
After you use the
anomalies command in a search, look at the Interesting Fields list in the Search & Reporting window. Select the
unexpectedness field to see information about the values in your events.
The unexpectedness score of an event is calculated based on the similarity of that event (X) to a set of previous events (P).
The formula for unexpectedness is:
unexpectedness = [s(P and X) - s(P)] / [s(P) + s(X)]
In this formula,
s( ) is a metric of how similar or uniform the data is. This formula provides a measure of how much adding X affects the similarity of the set of events. The formula also normalizes the results for the differing event sizes.
anomalies [threshold=num] [labelonly=bool] [normalize=bool] [maxvalues=int] [field=field] [blacklist=filename] [blacklistthreshold=num] [by-clause]
- Datatype: threshold=<num>
- Description: A number to represent the upper limit of expected or normal events. If unexpectedness calculated for an event is greater than this threshold limit, the event is considered unexpected or anomalous.
- Default: 0.01
- Datatype: labelonly=<bool>
- Description: Specifies if you want the output result set to include all events or only the events that are above the threshold value. The
unexpectednessfield is appended to all events. If
labelonly=true, no events are removed. If
labelonly=false, events that have a unexpectedness score less than the threshold are removed from the output result set.
- Default: false
- Datatype: normalize=<bool>
- Description: Specifies whether or not to normalize numeric text in the fields. All characters in the field from 0 to 9 are considered identical for purposes of the algorithm. The placement and quantity of the numbers remains significant. When a field contains numeric data that should not be normalized but treated as categories, set
- Default: true
- Datatype: maxvalues=<int>
- Description: Specifies the size of the sliding set of previous events to include when determining the unexpectedness of a field value. By default the calculation uses the previous 100 events for the comparison. If the current event number is 1000, the calculation uses the values in events 900 to 999 in the calculation. If the current event number is 1500, the calculation uses the values in events 1400 to 1499 in the calculation. You can specify a number between 10 and 10000. Increasing the value of
maxvaluesincreases the total CPU cost per event linearly. Large values have very long search runtimes.
- Default: 100
- Datatype: field=<field>
- Description: The field to analyze when determining the unexpectedness of an event.
- Datatype: blacklist=<filename>
- Description: The name of a CSV file that contains a list of events that are expected and should be ignored. Any incoming event that is similar to an event in the blacklist is treated as not anomalous, or expected, and given an unexpectedness score of 0.0. The CSV file must be located in the
$SPLUNK_HOME/var/run/splunk/directory on the search head. If you have Splunk Cloud and want to configure a blacklist file, file a Support ticket.
- Datatype: blacklistthreshold=<num>
- Description: Specifies a similarity score threshold for matching incoming events to blacklisted events. If the incoming event has a similarity score above the
blacklistthreshold, the event is marked as unexpected.
- Default: 0.05
- Syntax: by <fieldlist>
- Description: Use to specify a list of fields to segregate the results for anomaly detection. For each combination of values for the specified fields, the events with those values are treated entirely separately.
Show the interesting events, ignoring any events in the blacklist 'boring events'. Sort the event list in descending order, with highest value in the unexpectedness field listed first.
... | anomalies blacklist=boringevents | sort -unexpectedness
Use with transactions to find regions of time that look unusual.
... | transaction maxpause=2s | anomalies
Look for anomalies in each source separately -- a pattern in one source will not affect that it is anomalous in another source.
... | anomalies by source
This example shows how to tune a search for anomalies using the
Start with a search that uses the default
index=_internal | anomalies by group | search group=*
This search looks at events in the
_internal index and calculates the
unexpectedness score for sets of events that have the same
group value. This means that the sliding set of events used to calculate the
unexpectedness for each unique
group value included only events that have the same
group value. The search command is then used to show events that only include the
group field. Here's a snapshot of the results:
With the default
threshold=0.01, you can see that some of these events might be very similar. This next search increases the
threshold a little:
index=_internal | anomalies threshold=0.03 by group | search group=*
With the higher
threshold value, you can see at-a-glance that there is more distinction between each of the events. Note the timestamps and key-value pairs.
Also, you might not want to hide the events that are not anomalous. Instead, you can add another field to your events that tells you whether or not the event is interesting to you. One way to do this is with the eval command:
index=_internal | anomalies threshold=0.03 labelonly=true by group | search group=* | eval threshold=0.03 | eval score=if(unexpectedness>=threshold, "anomalous", "boring")
This search uses
labelonly=true so that the boring events are still retained in the results list. The
eval command is used to define a field named
threshold and set it to the value. This has to be done explicitly because the
threshold attribute of the
anomalies command is not a field. The
eval command is then used to define another new field,
score, that is either "anomalous" or "boring" based on how the
unexpectedness compares to the
threshold value. Here's a snapshot of these results:
Have questions? Visit Splunk Answers and see what questions and answers the Splunk community has using the anomalies command.
This documentation applies to the following versions of Splunk® Enterprise: 6.0, 6.0.1, 6.0.2, 6.0.3, 6.0.4, 6.0.5, 6.0.6, 6.0.7, 6.0.8, 6.0.9, 6.0.10, 6.0.11, 6.0.12, 6.0.13, 6.0.14, 6.0.15, 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.1.5, 6.1.6, 6.1.7, 6.1.8, 6.1.9, 6.1.10, 6.1.11, 6.1.12, 6.1.13, 6.1.14, 6.2.0, 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5, 6.2.6, 6.2.7, 6.2.8, 6.2.9, 6.2.10, 6.2.11, 6.2.12, 6.2.13, 6.2.14, 6.2.15, 6.3.0, 6.3.1, 6.3.2, 6.3.3, 6.3.4, 6.3.6, 6.3.8, 6.3.9, 6.3.10, 6.3.11, 6.3.12, 6.3.13, 6.3.14, 6.4.0, 6.4.1, 6.4.2, 6.4.3, 6.4.4, 6.4.5, 6.4.6, 6.4.7, 6.4.8, 6.4.9, 6.4.10, 6.4.11, 6.5.0, 6.5.1, 6.5.1612 (Splunk Cloud only), 6.5.2, 6.5.3, 6.5.4, 6.5.5, 6.5.6, 6.5.7, 6.5.8, 6.5.9, 6.5.10, 6.6.0, 6.6.1, 6.6.2, 6.6.3, 6.6.4, 6.6.5, 6.6.6, 6.6.7, 6.6.8, 6.6.9, 6.6.10, 6.6.11, 6.6.12, 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 6.3.5, 6.3.7