Splunk® Enterprise

Search Reference

Acrobat logo Download manual as PDF

Splunk Enterprise version 6.x is no longer supported as of October 23, 2019. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk. Click here for the latest version.
Acrobat logo Download topic as PDF



Use the geostats command to generate statistics to display geographic data and summarize the data on maps.

The command generates statistics which are clustered into geographical bins to be rendered on a world map. The events are clustered based on latitude and longitude fields in the events. Statistics are then evaluated on the generated clusters. The statistics can be grouped or split by fields using a by clause.

For map rendering and zooming efficiency, the geostats command generates clustered statistics at a variety of zoom levels in one search, the visualization selecting among them. The quantity of zoom levels is controlled by the binspanlat, binspanlong, and maxzoomlevel options. The initial granularity is selected by the binspanlat and the binspanlong. At each level of zoom, the number of bins is doubled in both dimensions for a total of 4 times as many bins for each zoom in.


geostats [translatetoxy=<bool>] [latfield=<string>] [longfield=<string>] [globallimit=<int>] [locallimit=<int>] [outputlatfield=<string>] [outputlongfield=<string>] [ binspanlat=<float> binspanlong=<float> ] [maxzoomlevel=<int>] <stats-agg-term>... [<by-clause>]

Required arguments

Syntax: <stats-func> ( <evaled-field> | <wc-field> ) [AS <wc-field>]
Description: A statistical aggregation function. See Stats function options. Use the AS clause to place the result into a new field with a name that you specify. The function can be applied to an eval expression, or to a field or set of fields. You can use wild card characters in the field name.

Optional arguments

Syntax: binspanlat=<float>
Description: The size of the bins in latitude degrees at the lowest zoom level.
Default: 22.5. If the default values for binspanlat and binspanlong are used, a grid size of 8x8 is generated.
Syntax: binspanlong=<float>
Description: The size of the bins in longitude degrees at the lowest zoom level.
Default: 45.0. If the default values for binspanlat and binspanlong are used, a grid size of 8x8 is generated.
Syntax: BY <field>
Description: The name of the field to group by.
Syntax: globallimit=<int>
Description: Controls the number of named categories to add to each pie-chart. There is one additional category called "OTHER" under which all other split-by values are grouped. Setting globallimit=0 removes all limits and all categories are rendered. Currently the grouping into "OTHER" only works intuitively for count and additive statistics.
Default: 10
Syntax: locallimit=<int>
Description: Specifies the limit for series filtering. When you set locallimit=N, the top N values are filtered based on the sum of each series. If locallimit=0, no filtering occurs.
Syntax: latfield=<field>
Description: Specify a field from the pre-search that represents the latitude coordinates to use in your analysis.
Defaults: lat
Syntax: longfield=<field>
Description: Specify a field from the pre-search that represents the longitude coordinates to use in your analysis.
Default: lon
Syntax: maxzoomlevel=<int>
Description: The maximum level to be created in the quad tree.
Default: 9. Specifies that 10 zoom levels are created, 0-9.
Syntax: outputlatfield=<string>
Description: Specify a name for the latitude field in your geostats output data.
Default: latitude
Syntax: outputlongfield=<string>
Description: Specify a name for the longitude field in your geostats output data.
Default: longitude
Syntax: translatetoxy=<bool>
Description: If true, geostats produces one result per each locationally binned location. This mode is appropriate for rendering on a map. If false, geostats produces one result per category (or tuple of a multiply split dataset) per locationally binned location. Essentially this causes the data to be broken down by category. This mode cannot be rendered on a map.
Default: true

Stats function options

Syntax: The syntax depends on the function that you use. Refer to the table below.
Description: Statistical functions that you can use with the geostats command. Each time you invoke the geostats command, you can use one or more functions. However, you can only use one BY clause. See Usage.
The following table lists the supported functions by type of function. For descriptions and examples, see Statistical and charting functions.
Type of function Supported functions and syntax
Aggregate functions avg()








Event order functions earliest()
Multivalue stats and chart functions list(X)


To display the information on a map, you must run a reporting search with the geostats command.

If you are using a lookup command before the geostats command, see Optimizing your lookup search.

Functions and memory usage

Some functions are inherently more expensive, from a memory standpoint, than other functions. For example, the distinct_count function requires far more memory than the count function. The values and list functions also can consume a lot of memory.

If you are using the distinct_count function without a split-by field or with a low-cardinality split-by by field, consider replacing the distinct_count function with the the estdc function (estimated distinct count). The estdc function might result in significantly lower memory usage and run times.

Basic examples

1. Use the default settings and calculate the count

Cluster events by default latitude and longitude fields "lat" and "lon" respectively. Calculate the count of the events.

... | geostats count

2. Specify the latfield and longfield and calculate the average of a field

Compute the average rating for each gender after clustering/grouping the events by "eventlat" and "eventlong" values.

... | geostats latfield=eventlat longfield=eventlong avg(rating) by gender

Extended examples

3. Count each product sold by a vendor and display the information on a map

Note: This example uses the Search Tutorial data files tutorialdata.zip, and the two lookup files (prices.csv and vendors.csv). To use this example with your Splunk deployment, you must complete the steps in the Use field lookups section of the tutorial for both the prices.csv and the vendors.csv files. You can skip the step in the tutorial that makes the lookups automatic.

This search uses the stats command to narrow down the number of events that the lookup and geostats commands have to process.

Use the following search to compute the count of each product sold by a vendor and display the information on a map.

sourcetype=vendor_* | stats count by Code VendorID | lookup prices_lookup Code OUTPUTNEW product_name | table product_name VendorID | lookup vendors_lookup VendorID | geostats latfield=VendorLatitude longfield=VendorLongitude count by product_name

In this case, the sourcetype=vendor_sales and each of the events looks like this:

[26/Sep/2015:18:24:02] VendorID=5036 Code=B AcctID=6024298300471575

The prices_lookup is used to match the Code field in each event to a product_name in the table. The vendors_lookup is used to output all the fields in vendors.csv: Vendor, VendorCity, VendorID, VendorLatitude, VendorLongitude, VendorStateProvince, VendorCountry that match the VendorID in each event.

Note: In this search, the .csv files are uploaded and the lookups are defined but are not automatic.

This search produces a table displayed on the Statistics tab:

Searchref geostats ex1.png

On the Visualizations tab, you should see the information on a world map. In the screen shot below, the map is zoomed in and the mouse is over the pie chart for a region in the northeastern USA:

Searchref geostats ex1c.png

Zoom in and out to see more details on the map.

See also

iplocation, stats, xyseries


Have questions? Visit Splunk Answers and see what questions and answers the Splunk community has about using the geostats command.

Last modified on 30 January, 2018

This documentation applies to the following versions of Splunk® Enterprise: 6.3.0, 6.3.1, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.3.7, 6.3.8, 6.3.9, 6.3.10, 6.3.11, 6.3.12, 6.3.13, 6.3.14, 6.4.0, 6.4.1, 6.4.2, 6.4.3, 6.4.4, 6.4.5, 6.4.6, 6.4.7, 6.4.8, 6.4.9, 6.4.10, 6.4.11, 6.5.0, 6.5.1

Was this documentation topic helpful?

You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters