Splunk® Enterprise

Search Reference

Splunk Enterprise version 7.0 is no longer supported as of October 23, 2019. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk® Enterprise. For documentation on the most recent version, go to the latest release.

geostats

Description

Use the geostats command to generate statistics to display geographic data and summarize the data on maps.

The command generates statistics which are clustered into geographical bins to be rendered on a world map. The events are clustered based on latitude and longitude fields in the events. Statistics are then evaluated on the generated clusters. The statistics can be grouped or split by fields using a BY clause.

For map rendering and zooming efficiency, the geostats command generates clustered statistics at a variety of zoom levels in one search, the visualization selecting among them. The quantity of zoom levels is controlled by the binspanlat, binspanlong, and maxzoomlevel options. The initial granularity is selected by the binspanlat and the binspanlong. At each level of zoom, the number of bins is doubled in both dimensions for a total of 4 times as many bins for each zoom in.

Syntax

geostats [translatetoxy=<bool>] [latfield=<string>] [longfield=<string>] [globallimit=<int>] [locallimit=<int>] [outputlatfield=<string>] [outputlongfield=<string>] [ binspanlat=<float> binspanlong=<float> ] [maxzoomlevel=<int>] <stats-agg-term>... [<by-clause>]

Required arguments

stats-agg-term
Syntax: <stats-func> ( <evaled-field> | <wc-field> ) [AS <wc-field>]
Description: A statistical aggregation function. See Stats function options. The function can be applied to an eval expression, or to a field or set of fields. Use the AS clause to place the result into a new field with a name that you specify. You can use wild card characters in field names. For more information on eval expressions, see Types of eval expressions in the Search Manual.

Optional arguments

binspanlat
Syntax: binspanlat=<float>
Description: The size of the bins in latitude degrees at the lowest zoom level.
Default: 22.5. If the default values for binspanlat and binspanlong are used, a grid size of 8x8 is generated.
binspanlong
Syntax: binspanlong=<float>
Description: The size of the bins in longitude degrees at the lowest zoom level.
Default: 45.0. If the default values for binspanlat and binspanlong are used, a grid size of 8x8 is generated.
by-clause
Syntax: BY <field>
Description: The name of the field to group by.
globallimit
Syntax: globallimit=<int>
Description: Controls the number of named categories to add to each pie-chart. There is one additional category called "OTHER" under which all other split-by values are grouped. Setting globallimit=0 removes all limits and all categories are rendered. Currently the grouping into "OTHER" only works intuitively for count and additive statistics.
Default: 10
locallimit
Syntax: locallimit=<int>
Description: Specifies the limit for series filtering. When you set locallimit=N, the top N values are filtered based on the sum of each series. If locallimit=0, no filtering occurs.
latfield
Syntax: latfield=<field>
Description: Specify a field from the pre-search that represents the latitude coordinates to use in your analysis.
Defaults: lat
longfield
Syntax: longfield=<field>
Description: Specify a field from the pre-search that represents the longitude coordinates to use in your analysis.
Default: lon
maxzoomlevel
Syntax: maxzoomlevel=<int>
Description: The maximum level to be created in the quad tree.
Default: 9. Specifies that 10 zoom levels are created, 0-9.
outputlatfield
Syntax: outputlatfield=<string>
Description: Specify a name for the latitude field in your geostats output data.
Default: latitude
outputlongfield
Syntax: outputlongfield=<string>
Description: Specify a name for the longitude field in your geostats output data.
Default: longitude
translatetoxy
Syntax: translatetoxy=<bool>
Description: If true, geostats produces one result per each locationally binned location. This mode is appropriate for rendering on a map. If false, geostats produces one result per category (or tuple of a multiply split dataset) per locationally binned location. Essentially this causes the data to be broken down by category. This mode cannot be rendered on a map.
Default: true

Stats function options

stats-func
Syntax: The syntax depends on the function that you use. Refer to the table below.
Description: Statistical and charting functions that you can use with the geostats command. Each time you invoke the geostats command, you can use one or more functions.
The following table lists the supported functions by type of function. Use the links in the table to see descriptions and examples for each function. For an overview about using functions with commands, see Statistical and charting functions.
Type of function Supported functions and syntax
Aggregate functions avg()

count()
distinct_count()
estdc()
estdc_error()

exactperc<int>()

max()
median()
min()
mode()

perc<int>()

range()
stdev()
stdevp()

sum()

sumsq()
upperperc<int>()
var()
varp()

Event order functions earliest()
first()
last()
latest()
Multivalue stats and chart functions list(X)
values(X)

Usage

To display the information on a map, you must run a reporting search with the geostats command.

If you are using a lookup command before the geostats command, see Optimizing your lookup search.

Memory and maximum results

In the limits.conf file, the maxresultrows setting in the [searchresults] stanza specifies the maximum number of results to return. The default value is 50,000. Increasing this limit can result in more memory usage.

The max_mem_usage_mb setting in the [default] stanza is used to limit how much memory the geostats command uses to keep track of information. If the geostats command reaches this limit, the command stops adding the requested fields to the search results. You can increase the limit, contingent on the available system memory.

If you are using Splunk Cloud and want to change either of these limits, file a Support ticket.

Basic examples

1. Use the default settings and calculate the count

Cluster events by default latitude and longitude fields "lat" and "lon" respectively. Calculate the count of the events.

... | geostats count

2. Specify the latfield and longfield and calculate the average of a field

Compute the average rating for each gender after clustering/grouping the events by "eventlat" and "eventlong" values.

... | geostats latfield=eventlat longfield=eventlong avg(rating) by gender

Extended examples

3. Count each product sold by a vendor and display the information on a map

This example uses the sample data from the Search Tutorial. To try this example on your own Splunk instance, you must download the sample data and follow the instructions to get the tutorial data into Splunk. Use the time range All time when you run the search.


In addition, this example uses several lookup files that you must download (prices.csv.zip and vendors.csv.zip) and unzip the files. You must complete the steps in the Enabling field lookups section of the tutorial for both the prices.csv and the vendors.csv files. The steps in the tutorial are specific to the prices.csv file. For the vendors.csv file, use the name vendors_lookup for the lookup definition. Skip the step in the tutorial that makes the lookups automatic.

This search uses the stats command to narrow down the number of events that the lookup and geostats commands need to process.

Use the following search to count each product sold by a vendor and display the information on a map.

sourcetype=vendor_sales | stats count by Code VendorID | lookup prices_lookup Code OUTPUTNEW product_name | table product_name VendorID | lookup vendors_lookup VendorID | geostats latfield=VendorLatitude longfield=VendorLongitude count by product_name

  • In this example, sourcetype=vendor_sales is associated with a log file that is included in the Search Tutorial sample data. This log file contains vendor information that looks like this:
[06/Apr/2017:18:24:02]  VendorID=5036  Code=B  AcctID=6024298300471575
  • The vendors_lookup is used to output all the fields in vendors.csv file that match to the VentorID in the vendor_sales.log file. The fields in the vendors.csv file are : Vendor, VendorCity, VendorID, VendorLatitude, VendorLongitude, VendorStateProvince, and VendorCountry.
  • The prices_lookup is used to match the Code field in each event to a product_name in the table.

In this search, the CSV files are uploaded and the lookups are defined but are not automatic.

This search produces a table displayed on the Statistics tab:

This image shows the results of the search in the Statistics tab. The first column contains the geobin values. The second column contains the latitude values. The third column contains the longitude values. The remaining columns list the product names and corresponding counts.


Click the Visualization tab. The results are plotted on a world map. There is a pie chart for each vendor in the results. The larger the pie chart, the larger the count value.

This image shows the results of the search displayed on the Visualization tab. For each set of coordinates in the statistics table, a pie chart displays on a map. There are controls on the upper left side of the map to zoom in and out.

In this screen shot, the mouse pointer is over the pie chart for a region in the northeastern part of the United States. An popup information box displays the latitude and longitude for the vendor, as well as a count of each product that the vendor sold.

You can zoom in to see more details on the map.

See also

iplocation, stats, xyseries

Answers

Have questions? Visit Splunk Answers and see what questions and answers the Splunk community has about using the geostats command.

Last modified on 10 April, 2018
geomfilter   head

This documentation applies to the following versions of Splunk® Enterprise: 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13


Was this topic useful?







You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters