Saved searches for the Splunk App for AWS

The Splunk App for AWS includes the following saved searches.

Name	Purpose	Action required
Amazon Inspector: Topology Amazon Inspector Recommendation Generator	Generates Amazon Inspector data for the Amazon Inspector & Config Rules layer on the Topology dashboard.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
App Upgrader	Migrates topology data, refreshes the detailed billing data model, and enables newly introduced saved searches to complete the app upgrade.	Automatically enabled. No action required.
Anomaly Detection (billing_d, cloudtrail_d, cloudtrail_h)	Used for anomaly detection.	Automatically enabled when you configure an anomaly detection rule. No action required. Scheduled to run once on a daily basis.
AWS Billing - Account Name	Populates an Account name lookup file, account_name.csv, so that the app dashboards can display friendly names for the account IDs in your billing reports.	This saved search runs automatically the first time that a user access one of the four dashboards that contain billing data. If you have a large amount of data, this search may take up to a minute to fully populate the lookup file with the friendly names that correspond to the account IDs in the reports. After the lookup generation is complete, the dashboard prompts you to reload the page to display your friendly account names. This search is not scheduled, so after it runs the first time the lookup is not updated again. If, in future months, your billing reports include additional accounts, you may want to rerun the saved search manually to capture the new friendly names for those accounts.
AWS: calculate data volume indexed	Calculates how much data volume the app and add-on have ingested daily.	Automatically enabled. No action required. Scheduled to run once daily at twenty minutes past midnight.
AWS Config - Tags	Extract user tags from config data.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run once daily at midnight. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
AWS Description - CloudFront Edges	Generates metadata of Cloudfront Edges.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. No action required. Scheduled to run once on a daily basis. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
AWS Description - Tags	Extract user tags from description data.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run once daily at midnight. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Billing Alert: Account Total Cost	Billing alert template used for alerting user when the cost of a specific account reaches a threshold.	To use this alert, first modify the search to include your billing account ID, then enable this alert on the Alerts page in the app.
Billing Alert: Service Total Cost	Billing alert templates used for alerting user when the cost of a specific service reaches a threshold.	To use this alert, first modify the search to include a service name, then enable the alert on the Alerts page in the app.
Billing Alert: Subaccount Service Total Cost	Billing alert templates used for alerting user when the cost of a specific service for a subaccount reaches a threshold.	To use this alert, first modify the search to include your billing account ID and a service name, then enable this alert on the Alerts page in the app.
Billing Alert: Subaccount Total Cost	Billing alert templates used for alerting user when the cost of a specific subaccount reaches a threshold.	To use this alert, first modify the search to include your billing account ID, then enable this alert on the Alerts page in the app.
Billing: Detailed Reports List	Used to reduce the loading time of the "Select Billing Tags" window on the Configure dashboard.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run once daily at 10pm. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Billing: Topology Billing Metric Generator	Generates billing data for Billing layer on the Topology dashboard.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
CloudTrail Base Search	Used for report acceleration.	Accelerated search. No action required.
CloudTrail Timechart Search	Used for report acceleration.	Accelerated search. No action required.
CloudTrail S3 Data Event Search	Used for report acceleration.	Accelerated search. No action required.
CloudTrail Alert: IAM: Create/Delete Roles	CloudTrail alert triggered by creation or deletion of roles in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: IAM: Create/Delete/Update Access Keys	CloudTrail alert triggered by creation, deletion, or update of access keys in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: IAM: Create/Delete/Update Groups	CloudTrail alert triggered by creation, deletion, or update of groups in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: IAM: Create/Delete/Update Users	CloudTrail alert triggered by creation, deletion, or update of users in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: IAM: Group Membership Updates	CloudTrail alert triggered by group membership changes in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: Instances: Reboot/Stop/Terminate Actions	CloudTrail alert triggered by reboot, stop, or termination actions in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: Instances: Run/Start Actions	CloudTrail alert triggered by run or start actions in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: Key Pairs: Create/Delete/Import Key Pairs	CloudTrail alert triggered by creation, deletion, or importation of Key Pairs in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: Security Groups: Create/Delete Groups	CloudTrail alert triggered by creation or deletion of security groups in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: Unauthorized Actions	CloudTrail alert triggered by any unauthorized actions in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: VPC: Create/Delete VPC	CloudTrail alert triggered by the creation or deletion of VPCs in AWS.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: VPC: Create/Delete/Attach Network Interfaces	CloudTrail alert triggered by creation, deletion, or attachment of network interfaces in VPCs.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail Alert: VPC: Create/Delete/Replace Network ACLs	CloudTrail alert triggered by creation, deletion, or replacement of network ACLs in VPCs.	To use this alert, enable this alert on the Alerts page in the app.
CloudTrail EventName Generator	Extracts the eventnames from CloudTrail.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every twenty minutes on the hour, twenty minutes past the hour, and forty minutes past the hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
CloudWatch: Topology CPU Metric Generator	Gets past day's average value for CPU Percentage from CloudWatch every hour. It is used on topology dashboard in the KPI tooltip and CPU Utilization layer.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
CloudWatch: Topology Disk IO Metric Generator	Gets past day's average value for Disk IO Operation Count from CloudWatch every hour. It is used on topology dashboard in the KPI tooltip.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour, and forty minutes past the hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
CloudWatch: Topology Network Traffic Metric Generator	Gets past day's average value for Network IO Size from CloudWatch every hour. It is used on topology dashboard in the KPI tooltip and the Network Traffic layer.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
CloudWatch: Topology Volume IO Metric Generator	Gets past day's average value for Volume IO Operation Count from CloudWatch every hour. It is used on topology dashboard in the KPI tooltip.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
CloudWatch: Topology Volume Traffic Metric Generator	Gets past day's average value for Volume IO Size from CloudWatch every hour. It is used on topology dashboard in the KPI tooltip and the Network Traffic layer.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Config: Topology Daily Snapshot Generator	Generates daily snapshot of AWS topology.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every day. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Config: Topology Monthly Snapshot Generator	Generates monthly snapshot of AWS topology.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every month. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Config: Topology History Appender	Appends new AWS Config data collected through the Splunk Add-on for AWS to summary index, which is used to generate the AWS topology snapshot.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Config: Topology Playback Appender	Converts AWS Config data into topology summary index used by the topology playback feature.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every day. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Config: Topology History Generator	Migrates previous AWS Config data before update to summary index, which is used to generate the AWS topology snapshot.	Automatically scheduled to run once shortly after upgrade. No action required. You can also manually run this saved search after upgrading the app from an earlier version.
Config Rules: Topology Config Rules Generator	Generates Config Rules data for the Amazon Inspector & Config Rules layer on the Topology dashboard.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
Config Rules Alert: New Non-Compliant Resource	Sends an alert when a new non-compliant resource is found by Config Rules during the previous day.	To use this alert, enable this alert on the Alerts page in the app.
Insights Alert: Billing Anomaly Detection	Used for alerting the user when anomalies have been detected in Billing data.	To use this alert, enable this alert on the Alerts page in the app.
Insights Alert: Security Anomaly Detection	Used for alerting the user when anomalies have been detected in CloudTrail data.	To use this alert, enable this alert on the Alerts page in the app.
Insights: ELB, Insights: EIP, Insights: EBS	Used to generate insights.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.
ELB Alert: latency	Sets off an alert when ELB latency is greater than 100 seconds.	To use this alert, enable this alert on the Alerts page in the app.
Machine Learning Recommendation	This saved search runs every day to generate Recommendations on the Topology dashboard.	Automatically enabled. No action required. Scheduled to run every night at 9pm. Splunk recommends that you not run this search manually.
RI Expiration Alert - RI Plans expired within one month	Sets off an alert when an RI plan is about to expire within one month.	To use this alert, enable this alert on the Alerts page in the app.
Update Macros	Synchronizes macro searches between the Splunk Add-on for AWS and the Splunk App for AWS.	If you use any indexes other than main, run this macro to update the app's index macro.
VPC Flow Logs Summary Generator (Dest Port, Dest IP, Src IP)	Generates VPC Flow Logs data in summary index.	Automatically enabled when you configure any input through the Splunk App for AWS Configure tab. Scheduled to run every hour. If you configure all your inputs through the Splunk Add-on for AWS instead, you should manually enable and schedule this saved search.