Migrate non-clustered indexers to a clustered environment
Read the topic "Key differences between clustered and non-clustered deployments of indexers" carefully if you plan to migrate your current set of indexers to an indexer cluster. That topic describes issues that you must understand before initiating the migration process.
You can add a non-clustered indexer to a cluster (as a peer node) at any time. To do so, just enable the indexer as a peer, as described in "Enable the peer nodes".
Once the indexer has been made a peer, it participates in the cluster the same as any other peer. Any new data coming into the peer gets replicated according to the cluster's replication factor, and the peer is also a candidate for receiving replicated data from other peers. Data already on the indexer does not get automatically replicated, but it does participate in searches, as described below.
Important: Before migrating an indexer from non-clustered to clustered, be certain of your needs. The process goes in one direction only. There is no supported procedure for converting an indexer from clustered to non-clustered.
Manage legacy data
The term "legacy data" means data stored on an indexer prior to its conversion to a cluster peer.
How the cluster handles legacy indexed data
When you add an existing indexer to the cluster, the cluster does not replicate any buckets that are already on the indexer.
Buckets already on the indexer prior to its being added to the cluster are called "standalone" buckets. Searches will still occur across those buckets and will be combined with search results from the cluster's replicated buckets.
Is there any way to migrate my legacy data?
Because of the high processing cost of converting standalone buckets to replicated buckets (due to the need to make multiple searchable and non-searchable copies of those buckets to fulfill the cluster's replication and search factors), it is generally a bad idea to attempt to do so, particularly in the case of indexers with large numbers of standalone buckets. There is no supported procedure for this conversion. If, however, you have a strong need for such a conversion, contact Splunk Professional Services to discuss the trade-offs and requirements for this operation.
Migrate apps to a cluster
In your current, non-clustered environment, you might be using deployment server to distribute apps to your set of indexers. You will no longer be able to do so once you convert the indexers to cluster peer nodes. See "Key differences between clustered and non-clustered deployments of indexers" for details.
To distribute apps to peer nodes, you must instead use the configuration bundle method described in "Update common peer configurations and apps". You place the apps in a special location on the master node, and the master pushes the apps to each indexer when you first enable it as a peer. If you need to add or change apps later on, you make the changes and additions on the master and then tell the master to push the updated configuration bundle to the entire set of peers.
For information on how the configuration bundle method compares with the deployment server, see "Cluster peer management compared to deployment server".
Important: You must use the configuration bundle method to distribute apps to peer nodes; the deployment server is unsupported for that purpose.
How to migrate apps
It's recommended that you migrate apps at the time that you enable the cluster. The procedure described below describes how to do that.
Important: You must be familiar with the preceding topics in the current chapter before attempting this procedure. Start with "Indexer cluster deployment overview" and read onwards until you return to this topic.
This procedure assumes that you are starting with a distributed search environment with a set of indexers configured as deployment clients of a deployment server. The deployment server is being used to push apps to the indexers. It is these indexers that you will be converting to cluster peer nodes. Once they've become peer nodes, you can no longer use the deployment server to push apps to them; instead, you must use the configuration bundle method.
To migrate your apps at the time of cluster enablement, follow these steps:
1. Enable the master, as described in "Enable the master node".
2. On the deployment server, locate the set of apps that it pushes to the indexers that you're planning to migrate. These should be under the deployment server's
3. Copy these apps from the deployment server to the cluster master's
$SPLUNK_HOME/etc/master-apps directory. See "Structure of the configuration bundle" for information on the
4. Examine each app in
master-apps for any
indexes.conf file(s). In those files, locate any stanzas that define new indexes. In each of those stanzas, add this attribute/value pair:
This enables replication for the index. See "The indexes.conf repFactor attribute" for more information.
Note: If you are the creator and maintainer of the app, you can also make this change in
5. Convert each indexer to a cluster peer, one at a time:
- a. Reconfigure the indexer so that it's no longer a deployment client.
- b. Delete the deployed apps from the indexer's
$SPLUNK_HOME/etc/appsdirectory. Leave the default apps, such as Search, in place.
- c. Enable the indexer as a cluster peer, as described in "Enable the peer nodes".
- d. Restart the peer to complete the enablement process.
- e. Verify that the master has pushed the expected set of apps to the peer's
6. Once all peers have been enabled, go to the master dashboard and verify that the expected set of indexes is being replicated. This dashboard is described in "View the master dashboard".
For more information on configuring cluster peers, see these topics:
Use indexer clusters to scale indexing
Upgrade an indexer cluster
This documentation applies to the following versions of Splunk® Enterprise: 6.1, 6.1.1, 6.1.2, 6.1.3, 6.1.4, 6.1.5, 6.1.6, 6.1.7, 6.1.8, 6.1.9, 6.1.10, 6.1.11, 6.1.12, 6.1.13, 6.1.14, 6.2.0, 6.2.1, 6.2.2, 6.2.3, 6.2.4, 6.2.5, 6.2.6, 6.2.7, 6.2.8, 6.2.9, 6.2.10, 6.2.11, 6.2.12, 6.2.13, 6.2.14, 6.2.15, 6.3.0, 6.3.1, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.3.7, 6.3.8, 6.3.9, 6.3.10, 6.3.11, 6.3.12, 6.3.13, 6.3.14, 6.4.0, 6.4.1, 6.4.2, 6.4.3, 6.4.4, 6.4.5, 6.4.6, 6.4.7, 6.4.8, 6.4.9, 6.4.10, 6.4.11, 6.5.0, 6.5.1, 6.5.1612 (Splunk Cloud only), 6.5.2, 6.5.3, 6.5.4, 6.5.5, 6.5.6, 6.5.7, 6.5.8, 6.5.9, 6.5.10, 6.6.0, 6.6.1, 6.6.2, 6.6.3, 6.6.4, 6.6.5, 6.6.6, 6.6.7, 6.6.8, 6.6.9, 6.6.10, 6.6.11, 6.6.12, 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 8.0.0