Splunk® Enterprise

Search Reference

Acrobat logo Download manual as PDF


Splunk Enterprise version 7.1 is no longer supported as of October 31, 2020. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
Acrobat logo Download topic as PDF

contingency

Description

In statistics, contingency tables are used to record and analyze the relationship between two or more (usually categorical) variables. Many metrics of association or independence, such as the phi coefficient or the Cramer's V, can be calculated based on contingency tables.

You can use the contingency command to build a contingency table, which in this case is a co-occurrence matrix for the values of two fields in your data. Each cell in the matrix displays the count of events in which both of the cross-tabulated field values exist. This means that the first row and column of this table is made up of values of the two fields. Each cell in the table contains a number that represents the count of events that contain the two values of the field in that row and column combination.

If a relationship or pattern exists between the two fields, you can spot it easily just by analyzing the information in the table. For example, if the column values vary significantly between rows (or vice versa), there is a contingency between the two fields (they are not independent). If there is no contingency, then the two fields are independent.


Syntax

contingency [<contingency-options>...] <field1> <field2>

Required arguments

<field1>
Syntax: <field>
Description: Any field. You cannot specify wildcard characters in the field name.
<field2>
Syntax: <field>
Description: Any field. You cannot specify wildcard characters in the field name.

Optional arguments

contingency-options
Syntax: <maxopts> | <mincover> | <usetotal> | <totalstr>
Description: Options for the contingency table.

Contingency options

maxopts
Syntax: maxrows=<int> | maxcols=<int>
Description: Specify the maximum number of rows or columns to display. If the number of distinct values of the field exceeds this maximum, the least common values are ignored. A value of 0 means a maximum limit on rows or columns. This limit comes from the maxvalues setting in the [ctable] stanza in the limits.conf file.
Default: 1000
mincover
Syntax: mincolcover=<num> | minrowcover=<num>
Description: Specify a percentage of values per column or row that you would like represented in the output table. As the table is constructed, enough rows or columns are included to reach this ratio of displayed values to total values for each row or column. The maximum rows or columns take precedence if those values are reached.
Default: 1.0
usetotal
Syntax: usetotal=<bool>
Description: Specify whether or not to add row, column, and complete totals.
Default: true
totalstr
Syntax: totalstr=<field>
Description: Field name for the totals row and column.
Default: TOTAL

Usage

The contingency command is a transforming command. See Command types.

This command builds a contingency table for two fields. If you have fields with many values, you can restrict the number of rows and columns using the maxrows and maxcols arguments.

Totals

By default, the contingency table displays the row totals, column totals, and a grand total for the counts of events that are represented in the table. If you don't want the totals to appear in the results, include the usetotal=false argument with the contingency command.

Empty values

Values which are empty strings ("") will be represented in the results table as EMPTY_STR.

Limits

There is a limit on the value of maxrows or maxcols, which means more than 1000 values for either field will not be used.

Examples

1. Build a contingency table of recent data

This search uses recent earthquake data downloaded from the USGS Earthquakes website. The data is a comma separated ASCII text file that contains magnitude (mag), coordinates (latitude, longitude), region (place), etc., for each earthquake recorded.

You can download a current CSV file from the USGS Earthquake Feeds and upload the file to your Splunk instance. This example uses the All Earthquakes data from the past 30 days. Use the time range All time when you run the searches.

You want to build a contingency table to look at the relationship between the magnitudes and depths of recent earthquakes. You start with a simple search.

source=all_month.csv | contingency mag depth | sort mag

There are quite a range of values for the Magnitude and Depth fields, which results in a very large table. The magnitude values appear in the first column. The depth values appear in the first row. The list is sorted by magnitude.

The results appear on the Statistics tab. The following table shows only a small portion of the table of results returned from the search.

mag 10 0 5 35 8 12 15 11.9 11.8 6.4 5.4 8.2 6.5 8.1 5.6 10.1 9 8.5 9.8 8.7 7.9
-0.81 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0.59 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0.56 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0.45 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0.43 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

As you can see, earthquakes can have negative magnitudes. Only where an earthquake occurred that matches the magnitude and depth will a count appear in the table.

To build a more usable contingency table, you should reformat the values for the magnitude and depth fields. Group the magnitudes and depths into ranges.

source=all_month.csv | eval Magnitude=case(mag<=1, "0.0 - 1.0", mag>1 AND mag<=2, "1.1 - 2.0", mag>2 AND mag<=3, "2.1 - 3.0", mag>3 AND mag<=4, "3.1 - 4.0", mag>4 AND mag<=5, "4.1 - 5.0", mag>5 AND mag<=6, "5.1 - 6.0", mag>6 AND mag<=7, "6.1 - 7.0", mag>7,"7.0+") | eval Depth=case(depth<=70, "Shallow", depth>70 AND depth<=300, "Mid", depth>300 AND depth<=700, "Deep") | contingency Magnitude Depth | sort Magnitude

This search uses the eval command with the case() function to redefine the values of Magnitude and Depth, bucketing them into a range of values. For example, the Depth values are redefined as "Shallow", "Mid", or "Deep". Use the sort command to sort the results by magnitude. Otherwise the results are sorted by the row totals.

The results appear on the Statistics tab and look something like this:

Magnitude Shallow Mid Deep TOTAL
0.0 - 1.0 3579 33 0 3612
1.1 - 2.0 3188 596 0 3784
2.1 - 3.0 1236 131 0 1367
3.1 - 4.0 320 63 1 384
4.1 - 5.0 400 157 43 600
5.1 - 6.0 63 12 3 78
6.1 - 7.0 2 2 1 5
TOTAL 8788 994 48 9830

There were a lot of quakes in this month. Do higher magnitude earthquakes have a greater depth than lower magnitude earthquakes? Not really. The table shows that the majority of the recent earthquakes in all of magnitude ranges were shallow. There are significantly fewer earthquakes in the mid-to-deep range. In this data set, the deep-focused quakes were all in the mid-range of magnitudes.

2. Identify potential component issues in the Splunk deployment

Determine if there are any components that might be causing issues in your Splunk deployment. Build a contingency table to see if there is a relationship between the values of log_level and component. Run the search using the time range All time and limit the number of columns returned.

index=_internal | contingency maxcols=5 log_level component

Your results should appear something like this:

This screen image shows the results of the search on the Statistics tab. There are four log_levels listed in the first column. The log_levels are INFO, ERROR, WARN, and WARNING. The components are Metrics, HotDBManager, pipeline, PeriodicHealthReporter, and root. The contingency command generates totals for each row and column.


These results show you any components that might be causing issues in your Splunk deployment. The component field has more than 50 values. In this search, the maxcols argument is used to show 5 components with the highest values.

See also

associate, correlate

Last modified on 16 November, 2021
PREVIOUS
concurrency
  NEXT
convert

This documentation applies to the following versions of Splunk® Enterprise: 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6, 7.3.7, 7.3.8, 7.3.9, 8.0.0, 8.0.1, 8.0.2, 8.0.3, 8.0.4, 8.0.5, 8.0.6, 8.0.7, 8.0.8, 8.0.9, 8.0.10, 8.1.0, 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6, 8.1.7, 8.1.8, 8.1.9, 8.1.10, 8.1.11, 8.1.12, 8.1.13, 8.1.14, 8.2.0, 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5, 8.2.6, 8.2.7, 8.2.8, 8.2.9, 8.2.10, 8.2.11, 8.2.12, 9.0.0, 9.0.1, 9.0.2, 9.0.3, 9.0.4, 9.0.5, 9.0.6, 9.0.7, 9.0.8, 9.1.0, 9.1.1, 9.1.2, 9.1.3, 9.2.0


Was this documentation topic helpful?


You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters