Splunk® Enterprise

Knowledge Manager Manual

Acrobat logo Download manual as PDF


Splunk Enterprise version 7.3 is no longer supported as of October 22, 2021. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk® Enterprise. For documentation on the most recent version, go to the latest release.
Acrobat logo Download topic as PDF

Define an automatic lookup in Splunk Web

Manual lookups are applied to the results of a search when they are invoked with the lookup command. Automatic lookups are applied to all searches at search time.

Splunk software does not support nested automatic lookups.

Add a new lookup to run automatically

Prerequisites
Review the following topics:

A lookup definition that you have defined previously.
Steps

  1. In Splunk Web, select Settings > Lookups.
  2. Under Actions for Automatic Lookups, click Add new.
  3. Select the Destination app.
  4. Give your automatic lookup a unique Name.
  5. Select the Lookup table that you want to use in your fields lookup.
    This is the name of the lookup definition that you defined on the Lookup Definition page.
  6. In the Apply to menu, select a host, source, or source type value to apply the lookup and give it a name in the named field.
  7. Under Lookup input fields provide one or more pairs of input fields.
    The first field is the field in the lookup table that you want to match. The second field is a field from your events that matches the lookup table field. For example, you can have an ip_address field in your events that matches an ip field in the lookup table. So you would enter ip = ip_address in the automatic lookup definition.
  8. Under Lookup output fields provide one or more pairs of output fields.
    The first field is the corresponding field that you want to output to events. The second field is the name that the output field should have in your events. For example, the lookup table may have a field named country that you may want to output to your events as ip_city. So you would enter country=ip_city in the automatic lookup definition.

    To avoid creating automatic lookup reference cycles, do not leave the Lookup output fields blank.
  9. Select Overwrite field values to overwrite existing field values in events when the lookup runs. If you do not select this checkbox, the Splunk software does not apply the lookup to events where the output fields already exist.
    Note: This is equivalent to configuring your fields lookup in props.conf.
  10. Click Save.

The Automatic lookup view appears, and the lookup that you have defined is listed.

If you have selected Overwrite field values, the automatic lookup lists with the keyword OUTPUT in its name. If you do not select Overwrite field values, the automatic lookup lists with OUTPUTNEW in its name.

Avoid creating automatic lookup reference cycles

You will receive error messages for automatic lookup definitions that contain lookup reference cycles. A reference cycle occurs when lookup input and output fields end up being reused, either within the same lookup configuration, or among related lookup configurations.

For example, the following lookup configuration sets up a simple reference cycle where the type field appears as an input field and an output field. It is a case where the field that you are matching in your events is the same field that you are adding to your events.

  • LOOKUP-meeting-type meeting_type_lookup object.type as type OUTPUTNEW meeting_type as type

You can accidentally set up more complex reference cycles between two or more related lookup configurations. For example, you might have a situation where multiple lookups combine to have fieldA ← fieldB ← fieldC ← fieldA.

Lookup reference cycles are often accidentally created when the Lookup output fields are left blank during the definition of an automatic lookup. When you leave Lookup output fields blank, the Splunk software uses all of the fields in the lookup table that are not the match fields as implicit output fields. Implicit output fields can easily create situations where the same field names appear in the match and output field sets. It can also set up reference cycles that involve multiple lookup configurations.

For example, say you have a lookup table named columns that contains five fields: column1, column2, column3 column4, and column5. Then you set up the following two lookup configurations that both leverage the columns lookup table:

  • LOOKUP-col-testA columns column1 as column2 OUTPUT
  • LOOKUP-col-testB columns column1 as column3 OUTPUTNEW column4, column5 as field5

When you consider that the implicit output fields for LOOKUP-col-testA are actually all of the fields from the column lookup table except column1 (meaning column2, column3 column4, and column5), you can see how this can cause these configurations to get tangled up with each other.

This table shows you the lookup reference cycles that different searches will encounter as a result of the way these automatic lookups have been configured:

Search Reference cycle encountered
column2=* column2 ← column2
column3=* column3 ← column2 ← column2
field5=* field5 ← column3 ← column2 ← column2

Each of these searches returns a lookup reference cycle warning message through the UI. The warning message tells you to inspect search.log for details and update lookup configurations to remove the reference cycle.

Last modified on 19 July, 2021
PREVIOUS
Define a time-based lookup in Splunk Web
  NEXT
Lookup example in Splunk Web

This documentation applies to the following versions of Splunk® Enterprise: 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6, 7.3.7, 7.3.8, 7.3.9, 8.0.0, 8.0.1, 8.0.2, 8.0.3, 8.0.4, 8.0.5, 8.0.6, 8.0.7, 8.0.8, 8.0.9, 8.0.10, 8.1.0, 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6, 8.1.7, 8.1.8, 8.1.9, 8.1.10, 8.1.11, 8.1.12, 8.1.13, 8.1.14, 8.2.0, 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5, 8.2.6, 8.2.7, 8.2.8, 8.2.9, 8.2.10, 8.2.11, 8.2.12


Was this documentation topic helpful?


You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters