Create a search head pool
To create a pool of search heads, follow these steps:
1. Set up a shared storage location accessible to each search head.
2. Configure each individual search head.
3. Stop the search heads.
4. Enable pooling on each search head.
5. Copy user and app directories to the shared storage location.
6. Restart the search heads.
The steps are described below in detail:
So that each search head in a pool can share configurations and artifacts, they need to access a common set of files via shared storage:
- On *nix platforms, set up an NFS mount.
- On Windows, set up a CIFS (SMB) share.
Important: The Splunk user account needs read/write access to the shared storage location. When installing a search head on Windows, be sure to install it as a user with read/write access to shared storage. The Local System user does not have this access. For more information, see "Choose the user Splunk should run as" in the Installation manual.
2. Configure each search head
a. Set up each search head individually, specifying the search peers in the usual fashion. See "Add search peers to the search head".
b. Make sure that each search head has a unique
serverName attribute, configured in server.conf. See "Manage distributed server names" for detailed information on this requirement. If the search head does not have a unique
serverName, a warning will be generated at start-up. See "Warning about unique serverName attribute" for details.
c. Specify the necessary authentication. You have two choices:
- Specify user authentication on each search head separately. A valid user on one search head is not automatically a user on another search head in the pool. You can use LDAP to centrally manage user authentication, as described in "Set up user authentication with LDAP".
- Place a common authentication configuration on shared storage, to be used by all pool members. You must restart the pool members after any change to the authentication.
Note: Any authentication change made on an individual pool member (for example, via Splunk Web) overrides for that pool member only any configuration on shared storage. You should, therefore, generally avoid making authentication changes through Splunk Web if a common configuration already exists on shared storage.
3. Stop the search heads
Before enabling pooling, you must stop
splunkd. Do this for each search head in the pool.
4. Enable pooling on each search head
Use the CLI command
splunk pooling enable to enable pooling on a search head. The command sets certain values in
server.conf. It also creates subdirectories within the shared storage location and validates that Splunk Enterprise can create and move files within them.
Here's the command syntax:
splunk pooling enable <path_to_shared_storage> [--debug]
- On NFS,
<path_to_shared_storage>should be the NFS's share mountpoint.
- On Windows,
<path_to_shared_storage>should be the UNC path of the CIFS/SMB share.
--debugparameter causes the command to log additional information to
Execute this command on each search head in the pool.
The command sets values in the
[pooling] stanza of the
server.conf file in
You can also directly edit the
[pooling] stanza of
server.conf. For detailed information on
server.conf, look here.
[pooling] stanza must be placed in the
server.conf file directly under
$SPLUNK_HOME/etc/system/local/. This means that you cannot deploy the
[pooling] stanza via an app, either on local disk or on shared storage. For details see the server.conf spec file.
Copy the contents of the
$SPLUNK_HOME/etc/users directories on an existing search head into the empty
/etc/users directories in the shared storage location. Those directories were created in step 4 and reside under the
<path_to_shared_storage> that you specified at that time.
For example, if your NFS mount is at
/tmp/nfs, copy the apps subdirectories that match this pattern:
This results in a set of subdirectories like:
/tmp/nfs/etc/apps/search /tmp/nfs/etc/apps/launcher /tmp/nfs/etc/apps/unix [...]
Similarly, copy the user subdirectories:
Important: You can choose to copy over just a subset of apps and user subdirectories; however, be sure to move them to the precise locations described above.
6. Restart the search heads
After running the
splunk pooling enable command, restart
splunkd. Do this for each search head in the pool.
Overview of search head pooling
Use a load balancer with the search head pool
This documentation applies to the following versions of Splunk® Enterprise: 6.3.0, 6.3.1, 6.3.2, 6.3.3, 6.3.4, 6.3.5, 6.3.6, 6.3.7, 6.3.8, 6.3.9, 6.3.10, 6.3.11, 6.3.12, 6.3.13, 6.4.0, 6.4.1, 6.4.2, 6.4.3, 6.4.4, 6.4.5, 6.4.6, 6.4.7, 6.4.8, 6.4.9, 6.4.10, 6.4.11, 6.5.0, 6.5.1, 6.5.2, 6.5.3, 6.5.4, 6.5.5, 6.5.6, 6.5.7, 6.5.8, 6.5.9, 6.5.10, 6.6.0, 6.6.1, 6.6.2, 6.6.3, 6.6.4, 6.6.5, 6.6.6, 6.6.7, 6.6.8, 6.6.9, 6.6.10, 6.6.11, 6.6.12, 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6