deploymentclient.conf

The following are the spec and example files for deploymentclient.conf.

deploymentclient.conf.spec

#   Version 7.3.9
#
# This file contains possible settings and values for configuring a
# deployment client to receive content (apps and configurations) from a
# deployment server.
#
# To customize the way a deployment client behaves, place a
# deploymentclient.conf in $SPLUNK_HOME/etc/system/local/ on that Splunk
# instance. Configure what apps or configuration content is deployed to a
# given deployment client in serverclass.conf.  Refer to
# serverclass.conf.spec and serverclass.conf.example for more information.
#
# You must restart the Splunk software for changes to this configuration
# file to take effect.
#
# To learn more about configuration files (including precedence) please see
# the documentation located at
# http://docs.splunk.com/Documentation/Splunk/latest/Admin/Aboutconfigurationfiles

#***************************************************************************
# Configure a Splunk deployment client
#
# Note: At minimum, the [deployment-client] stanza must be in
# deploymentclient.conf to enable a deployment client.
#***************************************************************************

GLOBAL SETTINGS

# Use the [default] stanza to define any global settings.
#   * You can also define global settings outside of any stanza, at the top
#     of the file.
#   * Each .conf file should have only one default stanza. If there are
#     multiple default stanzas, their settings combine. When there are
#     multiple definitions of the same setting, the last definition in the
#     file takes precedence.
#   * If a setting is defined at both the global level and in a specific
#     stanza, the value in the specific stanza takes precedence.

[deployment-client]

disabled = <boolean>
* Enable or disable a deployment client
* Default: false

clientName = deploymentClient
* A name the deployment server can filter on
* Takes precedence over DNS names
* Default: deploymentClient

workingDir = $SPLUNK_HOME/var/run
* Temporary folder that the deploymentClient uses to download apps and
  configuration content

repositoryLocation = $SPLUNK_HOME/etc/apps
* The location where content installs when downloaded from a deployment server
* For the Splunk software instance on the deployment client to recogize an app
  or configuration content, install the app or content in the default location:
  $SPLUNK_HOME/etc/apps.
    * Note: Apps and configuration content for deployment can be in other
      locations on the deployment server. Set both 'repositoryLocation' and
      'serverRepositoryLocationPolicy' explicitly to ensure that the content
      installs on the deployment client in the correct location, which is
      $SPLUNK_HOME/etc/apps.
    * The deployment client uses the following 'serverRepositoryLocationPolicy'
      to determine the value of 'repositoryLocation'.

serverRepositoryLocationPolicy = [acceptSplunkHome|acceptAlways|rejectAlways]
* Specifies the value of 'repositoryLocation'for the deployment client to use
* acceptSplunkHome: Only accept the value of 'repositoryLocation' the
  deployment server supplies if it is rooted by $SPLUNK_HOME.
* acceptAlways: Always accept the 'repositoryLocation' the deployment server
  supplies.
* rejectAlways: Always reject the 'repositoryLocation' the deployment server
  supplies. Use the 'repositoryLocation'
  the local deploymentclient.conf specifies.
* Default: acceptSplunkHome

endpoint=$deploymentServerUri$/services/streams/deployment?name=$serverClassName$:$appName$
* Specifies the HTTP endpoint from which to download content.
* The deployment server can specify different endpoints from which to download
  different sets of content, such as individual apps.
* The deployment client uses the following 'serverEndpointPolicy' to determine
  which value to use:
* $deploymentServerUri$ resolves to "targetUri" defined in the following
  'target-broker'stanza.
* $serverClassName$ and $appName$ name the server class and the app,
  respectively.

serverEndpointPolicy = [acceptAlways|rejectAlways]

* acceptAlways: Always accept the endpoint supplied by the server.
* rejectAlways: Reject the endpoint supplied by the server. Always use the
  preceding endpoint definition.
* Default: acceptAlways

phoneHomeIntervalInSecs = <number in seconds>
* Determines how frequently, in seconds, this deployment client should
  check for new content.
* Fractional seconds are allowed.
* Default: 60.

handshakeRetryIntervalInSecs = <number in seconds>
* This sets the handshake retry frequency, in seconds.
* Could be used to tune the initial connection rate on a new server
* Default: One fifth of 'phoneHomeIntervalInSecs'

handshakeReplySubscriptionRetry = <integer>
* If splunk is unable to complete the handshake, it will retry subscribing to
  the handshake channel after this many handshake attempts
* Default: 10

appEventsResyncIntervalInSecs = <number in seconds>
* This sets the interval at which the client reports back its app state
  to the server.
* Fractional seconds are allowed.
* Default: 10 * 'phoneHomeIntervalInSecs'

# Advanced!
# Use this property only when you have a hierarchical deployment
# server installation, and have a Splunk instance that behaves as both a
# DeploymentClient and a DeploymentServer.

# NOTE: hierarchical deployment servers are not a currently recommended
# configuration.  Splunk has seen problems in the field that have not yet
# been resolved with this type of configuration.

reloadDSOnAppInstall = <boolean>
* Setting this flag to true causes the deploymentServer on this Splunk
  instance to be reloaded whenever an app is installed by this
  deploymentClient.
* Default: false

sslVersions = <versions_list>
* Comma-separated list of SSL versions to connect to the specified
  Deployment Server
* The versions available are "ssl3", "tls1.0", "tls1.1", and "tls1.2".
* The special version "*" selects all supported versions.  The version "tls"
  selects all versions tls1.0 or newer.
* If a version is prefixed with "-" it is removed from the list.
* SSLv2 is always disabled; "-ssl2" is accepted in the version list but
  does nothing.
* When configured in FIPS mode, ssl3 is always disabled regardless
  of this configuration.
* Default: Value of 'sslVersions' in server.conf [sslConfig] stanza.

sslVerifyServerCert = <bool>
* If this is set to true, Splunk verifies that the Deployment Server
  (specified in 'targetUri')
  being connected to is a valid one (authenticated).  Both the common
  name and the alternate name of the server are then checked for a
  match if they are specified in 'sslCommonNameToCheck' and 'sslAltNameToCheck'.
  A certificiate is considered verified if either is matched.
* Default: the "sslVerifyServerCert" value in the server.conf
  [sslConfig] stanza.

caCertFile = <path>
* Specifies a full path to a Certificate Authority (ca) certificate(s) PEM
  format file.
* The <path> must refer to a PEM format file containing one or more root CA
  certificates concatenated together.
* Used for validating the SSL certificate from the deployment server
* Default: the "caCertFile" value in the server.conf [sslConfig] stanza.

sslCommonNameToCheck = <commonName1>, <commonName2>, ...
* If this value is set, and 'sslVerifyServerCert' is set to true,
  splunkd checks the common name(s) of the certificate presented by
  the Deployment Server (specified in 'targetUri') against this list of
  common names.
* Default: the "sslCommonNameToCheck" value in the server.conf
  [sslConfig] stanza.

sslAltNameToCheck =  <alternateName1>, <alternateName2>, ...
* If this value is set, and 'sslVerifyServerCert' is set to true,
  splunkd checks the alternate name(s) of the certificate presented by
  the Deployment Server (specified in 'targetUri') against this list of
  subject alternate names.
* Default: the "sslAltNameToCheck" value in the server.conf [sslConfig] stanza.

cipherSuite = <cipher suite string>
* If set, uses the specified cipher string for making outbound HTTPS connection.
* No default.

ecdhCurves = <comma separated list of ec curves>
* Defines Elliptic Curve-Diffie Hellman curves to use for ECDH key negotiation.
* The curves should be specified in the order of preference.
* The client sends these curves as a part of Client Hello.
* Splunk software only support named curves specified by
  their SHORT names.
* The list of valid named curves by their short/long names can be obtained
  by executing this command:
  $SPLUNK_HOME/bin/splunk cmd openssl ecparam -list_curves
* For example: ecdhCurves = prime256v1,secp384r1,secp521r1
* Default: empty string.

connect_timeout = <positive integer>
* The amount of time, in seconds, that a deployment client can take to connect
  to a deployment server before the server connection times out.
* Default: 60

send_timeout = <positive integer>
* The amount of time, in seconds, that a deployment client can take to send or
  write data to a deployment server before the server connection times out.
* Default: 60

recv_timeout = <positive integer>
* The amount of time, in seconds, that a deployment client can take to receive
  or read data from a deployment server before the server connection times out.
* Default: 60

# The following stanza specifies deployment server connection information

[target-broker:deploymentServer]

targetUri= <uri>
* URI of the deployment server.
* An example of <uri>: <scheme>://<deploymentServer>:<mgmtPort>

connect_timeout = <positive integer>
* See 'connect_timeout' in the "[deployment-client]" stanza for
  information on this setting.

send_timeout = <positive integer>
* See 'send_timeout' in the "[deployment-client]" stanza for
  information on this setting.

recv_timeout = <positive integer>
* See 'recv_timeout' in the "[deployment-client]" stanza for
  information on this setting.

deploymentclient.conf.example

#   Version 7.3.9
#
# Example 1
# Deployment client receives apps and places them into the same
# repositoryLocation (locally, relative to $SPLUNK_HOME) as it picked them
# up from. This is typically $SPLUNK_HOME/etc/apps.  There
# is nothing in [deployment-client] because the deployment client is not
# overriding the value set on the deployment server side.

[deployment-client]

[target-broker:deploymentServer]
targetUri= deploymentserver.splunk.mycompany.com:8089


# Example 2
# Deployment server keeps apps to be deployed in a non-standard location on
# the server side (perhaps for organization purposes).
# Deployment client receives apps and places them in the standard location.
# Note: Apps deployed to any location other than
# $SPLUNK_HOME/etc/apps on the deployment client side will
# not be recognized and run.
# This configuration rejects any location specified by the deployment server
# and replaces it with the standard client-side location.

[deployment-client]
serverRepositoryLocationPolicy = rejectAlways
repositoryLocation = $SPLUNK_HOME/etc/apps

[target-broker:deploymentServer]
targetUri= deploymentserver.splunk.mycompany.com:8089


# Example 3
# Deployment client should get apps from an HTTP server that is different
# from the one specified by the deployment server.

[deployment-client]
serverEndpointPolicy = rejectAlways
endpoint = http://apache.mycompany.server:8080/$serverClassName$/$appName$.tar

[target-broker:deploymentServer]
targetUri= deploymentserver.splunk.mycompany.com:8089


# Example 4
# Deployment client should get apps from a location on the file system and
# not from a location specified by the deployment server

[deployment-client]
serverEndpointPolicy = rejectAlways
endpoint = file:/<some_mount_point>/$serverClassName$/$appName$.tar
handshakeRetryIntervalInSecs=20

[target-broker:deploymentServer]
targetUri= deploymentserver.splunk.mycompany.com:8089

# Example 5
# Deployment client should phonehome server for app updates quicker
# Deployment client should only send back appEvents once a day

[deployment-client]
phoneHomeIntervalInSecs=30
appEventsResyncIntervalInSecs=86400

[target-broker:deploymentServer]
targetUri= deploymentserver.splunk.mycompany.com:8089


# Example 6
# Sets the deployment client connection/transaction timeouts to 1 minute.
# Deployment clients terminate connections if deployment server does not reply.

[deployment-client]
connect_timeout=60 
send_timeout=60
recv_timeout=60