Splunk Enterprise version 8.0 is no longer supported as of October 22, 2021. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk® Enterprise.
For documentation on the most recent version, go to the latest release.
Known issues
The following are issues and workarounds for this version of Splunk Enterprise.
Issues are listed in all relevant sections. Some issues appear more than once. To check for additional security issues related to this release, visit the Splunk Security Portal.
Refer to System requirements in the Installation Manual for a list of supported platforms and architectures.
For a list of deprecated features and platforms, refer to Deprecated features and removed features in this manual.
Upgrade issues
| Date filed | Issue number | Description |
|---|---|---|
| 2020-12-05 | SPL-198311 | KVstore failed to start after offline upgrade of SHC from Splunk Enterprise 7.x to 8.x Workaround: 1) Use Searchable Rolling Upgrade rather than Offline upgrade for SHC nodes migration/upgrade. 2) If this issue is encountered after offline upgrade, please run the following steps on problematic SH nodes.
- Stop the search head that has the stale KV store member
- Run the command splunk clean kvstore --cluster
- Restart the search head. This triggers the initial synchronization with other KV store members.
- Run the command splunk show kvstore-status to verify synchronization has succeeded. |
| 2020-11-09 | SPL-197140, SPL-234386 | UF failed to start on Solaris 11.3 with error: "symbol in6addr_any: referenced symbol not found" Workaround: 1. Do not upgrade past Splunk 8.0.5 on Solaris 11.3 OR
2. Upgrade to Solaris 11.4 |
| 2020-08-31 | SPL-194426 | External search command chunked v2 python SDK fails with multibyte result data under python 3. Workaround: Apps may experience this issue if they: implement a custom search command using the Splunk Enterprise SDK for Python between versions 1.6.5 and 1.6.13; are executed by Splunk Enterprise or Splunk Cloud using Python 3; and are sent events with multi-byte characters. App developers whose apps implement a custom search command using a version of the Splunk Enterprise SDK for Python must update to version 1.6.14 or higher and release new versions of their apps. Splunk Enterprise and Splunk Cloud administrators who are using apps impacted by this issue must update to app versions that use the Splunk Enterprise SDK for Python version 1.6.14 or higher. If this is not possible, administrators are encouraged to either: allow these apps to be executed using Python 2; or cease usage of impacted apps until updated versions are available. |
| 2020-07-10 | SPL-191850 | The .deb installation package will fail if dpkg version doesn't support an .xz compressed control file. Workaround: Update dpkg to version 1.17.6 or later. |
| 2018-04-13 | SPL-153403 | After running the "clean userdata" command, admin is unable to login with msg "No users exist. Please set up a new user." Workaround: Create a $SPLUNK_HOME/etc/system/local/user-seed.conf and restart Splunk [user_info] |
| 2017-05-23 | SPL-141961 | Older 6.0, 6.1, 6.2, 6.3 maintenance release versions unable to connect to 6.6.x and later via management port. Workaround: This applies to License Master/Slave, Deployment Server/Client, Cluster Master/Peers, Search Head/Peers and affects Splunk 6.6.x and the following versions:
Upgrade your older instances to the latest maintenance releases or on your 6.6.x Splunk instances. Add the following stanza to server.conf: [sslConfig]
|
| 2017-03-20 | SPL-139019 | Possible compatibility issues between Python / SDK clients and new 6.6 and later default sslVersions, cipherSuites Workaround: Users can do either of the following: 1. Overwrite the new Splunk 6.6 server.conf [sslConfig] sslVersions, cipherSuites with your own settings that are compatible with your version of OpenSSL, e.g. the previous defaults from 6.5.x are compatible with OpenSSL 0.9.8 on Mac OSX: [sslConfig] 2. For some more up-to-date clients, it is possible to enforce TLS1.2 (e.g. --tlsv1.2 for curl) in order to connect successfully. 3. Upgrade OpenSSL on your platform and link it with your client (e.g. Python, curl, etc..). For example, OpenSSL 1.0.2 is currently available on Mac OSX via Homebrew (see https://brew.sh) and is compatible with the new Splunk 6.6 default sslVersions, cipherSuites. |
| 2017-03-13 | SPL-138647 | Possible compatibility issues between new 6.6 and later default sslVersions, cipherSuites and external services, e.g. e-mail, LDAP Workaround: If security is not a significant concern, simply revert back to the 6.5.x SSL/TLS defaults, e.g. for e-mail, add to $SPLUNK_HOME/etc/system/local/alert_actions.conf
[email]
TLS_PROTOCOL_MIN 3.1
The example below is for a Postfix SMTP server: eserv@indexer01:~$ splunk cmd openssl s_client -connect smtp-server01:465 | awk '/Protocol/ || /Cipher/ || /Verify/' Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Verify return code: 19 (self signed certificate in certificate chain) 2. Check the OpenSSL output for Protocol and Cipher. In the example above, Protocol = TLSv1 and Cipher = DHE-RSA-AES256-SHA 3. Update Splunk's relevant sslVersions and/or cipherSuite. In the example above, sslVersions should be set to tls (allows TLSv1, TLSv1.1, TLSv1.2) and DHE-RSA-AES256-SHA should be appended to the end of the defaultcipherSuites definition, e.g. add $SPLUNK_HOME/etc/system/local/alert_actions.conf :
[email] |
| 2014-08-20 | SPL-89640 | When running Splunk on Linux as non-root user and using RPM to upgrade, the RPM writes $SPLUNK_HOME/var/log/introspection as root, causing errors upon restarts Workaround: Chown the $SPLUNK_HOME/var/log/introspection directory to the user Splunk Enterprise runs as after upgrading and before restarting Splunk Enterprise. |
| 2013-08-19 | SPL-73386 | Users are not allowed to run historical scheduled search Workaround: 1. Create a special power/admin user who can run scheduled searches. 2. Assign this user ownership of the scheduled searches. 3. Share the searches at the app level and grant read/write permission to the correct set of users. |
Data input issues
| Date filed | Issue number | Description |
|---|---|---|
| 2020-09-29 | SPL-195635, SPL-202178, SPL-206477, SPL-202163, SPL-206534 | Splunkd increased memory usage over time when monitoring UDP port(s) with in inputs.conf |
| 2015-11-12 | SPL-109362 | When the disk runs out of space for the limit set in the server.conf, add data workflow gets stuck with "Uploading file" message modal in the review stage |
| 2015-05-22 | SPL-101981 | Field extractions do not work when sourcetypes use quotes in the Getting Data In interface. |
| 2015-03-17 | SPL-98163 | INDEXED_EXTRACTIONS=W3C is truncating field cs_uri_stem when spaces are present in URL Workaround: Create a separate extraction in props.conf where defined w3c extraction method: EXTRACT-cs_uri_stem1 = (GET|POST) (?<cs_uri_stem1>[^-]++) |
Search issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-08-10 | SPL-210070, SPL-209599 | Searches with hundreds of search commands can crash the main Splunk server. |
| 2021-06-02 | SPL-206635, SPL-210969 | tstats "fillnull_value" only works for results from tsidx (accelerated DM) but not from unaccelerated results (fallback search) Workaround: Use eval (calculated field) in datamodel to fill the null values in the definition itself, with something like this if(isnull(status), "NULL",status) |
| 2021-05-05 | SPL-205362, SPL-206450 | No events are returned when data with preceding wildcards(*) is ingested Workaround: Switch back to search evaluator v1 $ cat $SPLUNK_HOME/etc/system/local/limits.conf
[search]
use_search_evaluator_v2=false
|
| 2021-04-14 | SPL-204131, SPL-200134 | Gradually keep increasing memory usage by splunkd_server after an expensive search is done and then, ended up splunk being killed by oom killer because it hits to the limit about 50 GB memory. |
| 2021-04-12 | SPL-204015, SPL-200134 | Gradually keep increasing memory usage by splunkd_server after an expensive search is done and then, ended up splunk being killed by oom killer because it hits to the limit about 50 GB memory. |
| 2021-02-01 | SPL-200035, SPL-200195, SPL-201979 | mvexpand should keep the events only when at least one of the fields is valid Workaround: add to search: "| where len(FIELDNAME) > 0" |
| 2021-01-13 | SPL-199337, SPL-199928 | ProcessDispatchedSearch - PROCESS_SEARCH - Failed opening "": No such file or directory Workaround: In order to reduce disk/error impact/consumption by splunk I provided steps to filter out those events. |
| 2020-12-17 | SPL-198755, SPL-198870, SPL-199440 | False positive indexed_kv_limit related warning "The search you ran returned a number of fields that exceeded the current indexed field extraction limit." |
| 2020-12-06 | SPL-198314, SPL-233681, SPL-233762 | Exporting _time field applies user timezone offset but contains the server's timezone (usually +0000) Workaround: Force a specific time format by using strftime in an eval command. for example, add | convert timeformat="%FT%T.%3Q%z" ctime(_time) to the end of your search |
| 2020-12-03 | SPL-198240, SPL-198094 | srchTimeWin not effective if earliest= is used in query |
| 2020-12-03 | SPL-198239, SPL-198094 | srchTimeWin not effective if earliest= is used in query |
| 2020-12-03 | SPL-198241, SPL-198094 | srchTimeWin not effective if earliest= is used in query |
| 2020-12-03 | SPL-198279, SPL-199131, SPL-201160 | Search crashes with Segmentation Fault when slow_peer_disconnect is enabled Workaround: Disable slow_peer_disconnect on your search head(s) limits.conf [slow_peer_disconnect]
disabled = true
<\pre><br/>
|-
| 2020-09-14||SPL-194959, SPL-195134, SPL-196588||Using wildcards in conjunction with summary indexing reserved fields (psrsvd) yields incorrect search results.<br/><br/>Workaround:<br/>Rewrite the search to eliminate wildcards in the "fields" command or other command that references the fields that are reserved for Splunk's internal use. For a list of summary indexing field names, refer to https://docs.splunk.com/Documentation/Splunk/latest/Knowledge/Usesummaryindexing.<br/>
|-
| 2020-08-31||SPL-194426||External search command chunked v2 python SDK fails with multibyte result data under python 3.<br/><br/>Workaround:<br/>Apps may experience this issue if they: implement a custom search command using the Splunk Enterprise SDK for Python between versions 1.6.5 and 1.6.13; are executed by Splunk Enterprise or Splunk Cloud using Python 3; and are sent events with multi-byte characters.
App developers whose apps implement a custom search command using a version of the Splunk Enterprise SDK for Python must update to version 1.6.14 or higher and release new versions of their apps.
Splunk Enterprise and Splunk Cloud administrators who are using apps impacted by this issue must update to app versions that use the Splunk Enterprise SDK for Python version 1.6.14 or higher. If this is not possible, administrators are encouraged to either: allow these apps to be executed using Python 2; or cease usage of impacted apps until updated versions are available. <br/>
|-
| 2020-08-18||SPL-193853, DOCGUILD-4143||Use of 'sparkline' with no argument incorrectly invokes a 'deprecated stats command syntax' info message
|-
| 2020-08-11||SPL-193416, SPL-192132||The 'strict' argument of the 'rest' command produces incorrect results when used with an up-to-date SH and older indexers
|-
| 2020-07-13||SPL-191877, SPL-191342||All event types are extracted for numeric _raw data
|-
| 2020-02-12||SPL-183259||When generating LISPY for field values that are numbers (""), the values aren't deduplicated, which can cause slowdowns in certain scenarios<br/><br/>Workaround:<br/>Dedup values in search before, for example:
instead of
<pre>
index="field_test" [search index="field_test" globalCallID_callId=1234* | fields globalCallID_callId]
add a stats or dedup in the subsearch: index="field_test" [search index="field_test" globalCallID_callId=123* | stats values(globalCallID_callId) AS globalCallID_callId | mvexpand globalCallID_callId ] If that list is still large and you're seeing the slowdown, consider moving the filtering to a | where after the initial search, for example: index="field_test" globalCallID_callId=* | where [search index="field_test" globalCallID_callId=123* | stats values(globalCallID_callId) AS globalCallID_callId | mvexpand globalCallID_callId ] |
| 2020-01-21 | SPL-181973 | Predict command visualization is broken when the time series starts with an empty fields Workaround: Make sure that there are no leading null values for the field you're predicting: Pick a timerange that is known to start with values if possible. If you're using timechart: Addfixedrange=fto timechart SPL If not, something like this might help: ... | trendline sma5(count) as smooth_count | streamstats max(eval(if(isnotnull(smooth_count),1,null()))) AS flag | where flag=1 | fields - flag | predict smooth_count or something simpler with fillnull: ... | fillnull smooth_count | predict smooth_count However, this will impact the prediction as no data isn't the same as 0 |
| 2020-01-10 | SPL-181573 | geostats provides incorrect results for lower zoom levels when split BY has a higher cardinality than globallimit. Workaround: - Increase globallimit to the value of "unique values" number mentioned in the warning message: "The split by field <field> has a large number of unique values <number>. Chart column set will be trimmed to 10. Use globallimit argument to control column count." - Use very high globallimit in geostats and post process after if needed - Don't use BY in geostats - Use lower cardinality BY and/or higher globallimit in geostats |
| 2019-10-23 | SPL-178303, SPL-176333 | Lookups may return incorrect results due to internal caching Workaround: Add allow_caching=f to the lookup command: | lookup <name> allow_caching=f ... On 7.3+: Add allow_caching=f to the lookup definition on the search head transforms.conf: [<lookup name>] allow_caching = f To check if you might be running into this issue, you'll need to enable debug on the search in question by adding: | noop log_DEBUG=CachedProvider <pre> If you have hits for the cached lookup, like in the sample log below, you can hit this issue. <pre> DEBUG CachedProvider - Cached provider metrics: lookup=<lookup name> hits=67064 misses=321 total=67385 |
| 2019-10-15 | SPL-177977, SPL-177553 | For very large group by field values in certain stats results, search displays "Unable to moveRowPtrToInline" Workaround: Force use of the older (slower) stats implementation by setting [stats] use_stats_v2 = f in $SPLUNK_HOME/etc/system/local/limits.conf |
| 2019-05-23 | SPL-170987 | WARN SearchAssistant - recurseSyntax: Stanza entry not found for data-type |
| 2019-02-05 | SPL-166001 | 16MB+ events are not displayed on the search results, but they will be listed on the fields sidebar and in the timeline. search.log message: "SRSSerializer - max str len exceeded - probably corrupt" Workaround: Make sure fields are under 16777216 characters (or 16MB, usually _raw is the biggest) OR Revert back to the old serialization format (CSV), however, this applies to all searches, so you won't be getting the (performance) benefits of the new format. $SPLUNK_HOME/etc/system/local/limits.conf:
[search]
results_serial_format=csv |
| 2017-08-23 | SPL-144350 | Archived Index is created without error when the splunk index is invalid |
| 2017-07-13 | SPL-143111 | "Splunkd daemon is not responding" when edit local windows event log collection |
| 2017-04-04 | SPL-140765 | Splunk having problems extracting json file consisting of 68k plus key-value pairs |
| 2016-11-29 | SPL-133182 | When two datasets have identical names but one is local (private) while the other is global, attempts to view or extend the global dataset use results from the local dataset instead. |
| 2015-08-10 | SPL-105061, SOLNESS-7274 | Broken module prevents splunkweb from starting |
| 2015-06-17 | SPL-103247 | Filtering on _time uses different semantics for the "=" operator on microseconds depending on whether the value is quoted. |
| 2014-12-22 | SPL-94910 | The replace function does not apply to fields names with an underscore in them. Workaround: Rename the fields before the replace. ... | rename *_* AS *-* | replace "something" by "somethingelse" |
| 2014-11-13 | SPL-93039 | The relevancy search command does not work, always returning 0 or -inf. |
| 2014-10-02 | SPL-91638, SPL-107375 | For scheduled searches in a search head cluster, empty search jobs may appear in the job inspector for a cluster member. |
| 2014-09-15 | SPL-90861, SPL-90396, SPL-90886 | If search encounters invalid offsets or invalid rawdata at TSIDX offsets, it skips reading any number of events from that bucket. No message is displayed, though the information is added to search.log. |
| 2014-04-16 | SPL-83129 | Eval function strptime does not return results when 1970 date is used. |
| 2014-04-04 | SPL-82650 | A report created and scheduled by admin cannot be embedded by a power user. |
| 2014-03-27 | SPL-82357 | The splunk clean all -f CLI command doesn't remove data from the main index on Windows systems. |
| 2014-03-15 | SPL-81934 | For clusters, may be unable to open search results output file for search results in a cluster. Workaround: Write to a temp file and rename to the target file. |
| 2014-02-21 | SPL-80942 | Flashtimeline: 500 Internal Server Error when pasting long URL into panel name. |
| 2013-12-18 | SPL-78179 | REST /saved/searches App names with special characters have invalid links. |
| 2013-08-19 | SPL-73386 | Users are not allowed to run historical scheduled search Workaround: 1. Create a special power/admin user who can run scheduled searches. 2. Assign this user ownership of the scheduled searches. 3. Share the searches at the app level and grant read/write permission to the correct set of users. |
Saved search, alerting, scheduling, and job management issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-04-14 | SPL-204072, SPL-207674, SPL-207675 | Using a subsearch on an accelerated datamodel leads to incorrect results Workaround: limits.conf on the SH: [search]
phased_execution_mode = singlethreaded |
| 2020-08-12 | SPL-193497, SPL-193332 | After upgrade to version 8.0.5, the splunk user needs the "admin_all_objects" capability to send email alert |
| 2019-09-20 | SPL-176812 | Multiple SH Clustering with single deployer can't use datamodel summary sharing |
| 2018-09-19 | SPL-160286 | The data preview for the Add Data workflow does not display for Log to Metrics source types |
| 2017-11-29 | SPL-146802 | Distributed environment requires index defined on search head for log event alerts |
| 2015-11-15 | SPL-109471 | For Real Time Scheduled Search in search head cluster, alerts are triggered twice when members cannot HB to captain |
| 2015-04-09 | SPL-99421 | Long name of app causes accelerated search to not complete normally and shows invalid results on Windows 2008 R2 Workaround: Reduce length of name of the app and report acceleration searches will run properly within the context of the app. |
| 2014-08-15 | SPL-89332 | Report acceleration summaries do not show in Settings when you have hundreds of reports accelerated. |
| 2014-08-05 | SPL-88396 | After configuring a client name for a deployment client, the name is not shown in the Forwarder Management UI Workaround: Create a server class, where you can see the client name, and use that group when you add data. |
| 2014-05-01 | SPL-83686 | Data Model Pivot: Extra NULL column displays in Pivot with big data and Numbered Attribute in Split Columns. Workaround: The workaround is to add filter status=*, or make a more refined Data Model that has an object for events with status. |
| 2014-03-24 | SPL-82262, SPL-82241 | Pivot search command fails for an admin trying to pivot on a Private Data Model created by a User. |
| 2014-03-20 | SPL-82164 | Migrating invalid data models from 6.0 to 6.x fails. |
| 2014-03-19 | SPL-82133 | Data model allows users to upload a JSON file which has Field names with spaces but will not validate it. |
| 2014-03-10 | SPL-81637 | Splunkd preview runs indefinitely on any file preview with "DATETIME_CONFIG=none". |
| 2014-03-10 | SPL-81645 | Creating data model with root transaction name starting with root event name fails |
| 2013-11-26 | SPL-77054, SPL-77055 | Data model objects that have names starting with an underscore character ("_") do not work correctly and cannot be used in Pivot. |
Charting, reporting, and visualization issues
| Date filed | Issue number | Description |
|---|---|---|
| 2016-09-15 | SPL-128819, SPL-130243, SPL-130245 | Editing panel in dashboard removes charting.legend.masterlegend option Workaround: Use <option name="charting.legend.masterLegend">null</option> |
| 2016-04-27 | SPL-118911 | In SHC, referenced saved real-time searches in a dashboard do not stream results. Workaround: See Troubleshoot referenced real-time searches for workaround details.
|
| 2015-02-23 | SPL-97193 | The initial value for Multiselect input does not display properly in Visualizations Editor if input has empty string. |
Distributed search and search head clustering issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-01-13 | SPL-199337, SPL-199928 | ProcessDispatchedSearch - PROCESS_SEARCH - Failed opening "": No such file or directory Workaround: In order to reduce disk/error impact/consumption by splunk I provided steps to filter out those events. |
| 2020-12-21 | SPL-198851, SPL-198034, SPL-201925, SPL-199050, SPL-199416 | Unexplained benign SHCMasterHTTPProxy Low Level HTTP Request failure (for artifact) Response Code 500 post upgrade |
| 2020-12-21 | SPL-198850, SPL-200358, SPL-200357, SPL-201194 | Saved Searches in User Directories not Executing |
| 2018-03-14 | SPL-152148 | KV store replication fails on the upgrade search head during SHC member-by-member upgrade. Workaround: To ensure there is no kvstore activity during upgrade, perform an offline upgrade as follows:
|
| 2017-11-29 | SPL-146802 | Distributed environment requires index defined on search head for log event alerts |
| 2017-03-13 | SPL-138654 | Splunk searches fail when filepath gets too long on Windows |
| 2016-07-12 | SPL-124085 | On Search Head Cluster It is not possible to remove an App from the SHs once it has been disabled. |
| 2015-11-15 | SPL-109471 | For Real Time Scheduled Search in search head cluster, alerts are triggered twice when members cannot HB to captain |
| 2015-09-23 | SPL-106978 | Failed SHC captain election causes unnecessary change in server.conf |
| 2015-02-26 | SPL-97385 | $SPLUNK_HOME/var/run/splunk/snapshot contains large tarballs in the presence of large ES lookup table files. Workaround: The allowable size of the download can be increased by setting the following in server.conf. [httpServer] max_content_length = 1500MB The other option is to disable the search which controls the generation of the large lookup file. In this case, the search is: [Endpoint - Local Processes Tracker - Lookup Gen] |
| 2014-08-25 | SPL-90028 | Using "inputcsv dispatch=true" to read a CSV from a dispatch directory may not work on search head cluster members that have a replica of the desired artifact. |
| 2014-08-14 | SPL-89131 | In a search head cluster, the search Job management page on cluster member doesn't immediately reflect 'isSaved' state after you click Save. |
| 2014-08-02 | SPL-88228 | When user clicks on the RSS feed for an alert, search pool information is not displayed. Individual pool member information is displayed, however. |
Data model and pivot issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-04-14 | SPL-204072, SPL-207674, SPL-207675 | Using a subsearch on an accelerated datamodel leads to incorrect results Workaround: limits.conf on the SH: [search]
phased_execution_mode = singlethreaded |
| 2019-09-20 | SPL-176812 | Multiple SH Clustering with single deployer can't use datamodel summary sharing |
| 2014-12-08 | SPL-94047, SPL-98628 | While creating a Pivot and using the _time column as a Split column, the table columns aren't formatted in a human readable way, but displayed with the epoc timestamp.It works when using _time as a 'Split Row' column. |
| 2014-05-01 | SPL-83686 | Data Model Pivot: Extra NULL column displays in Pivot with big data and Numbered Attribute in Split Columns. Workaround: The workaround is to add filter status=*, or make a more refined Data Model that has an object for events with status. |
| 2014-03-24 | SPL-82262, SPL-82241 | Pivot search command fails for an admin trying to pivot on a Private Data Model created by a User. |
| 2014-03-20 | SPL-82164 | Migrating invalid data models from 6.0 to 6.x fails. |
| 2014-03-19 | SPL-82133 | Data model allows users to upload a JSON file which has Field names with spaces but will not validate it. |
| 2014-03-11 | SPL-81701 | Data Model Pivot, "Legend Position" and "Stack Mode" change to default settings if you change the X/Y-Axis more than once. |
| 2014-03-10 | SPL-81645 | Creating data model with root transaction name starting with root event name fails |
| 2014-03-07 | SPL-81538 | When using Pivot, stack mode is lost when "Scatter Chart" is selected. |
| 2013-11-26 | SPL-77054, SPL-77055 | Data model objects that have names starting with an underscore character ("_") do not work correctly and cannot be used in Pivot. |
Indexer and indexer clustering issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-06-01 | SPL-206510, SPL-213903, SPL-213901, SPL-213902 | CM issues fixup tasks for "frozen in cluster" clustered buckets Workaround: Workaround 1: Restart CM Workaround 2: Use a REST search on the CM to only show fixup for non-frozen bucket. In versions lower than 8.2.0, the endpoint name is master, not manager. | rest splunk_server=local /services/cluster/manager/fixup level=replication_factor
| table index title initial.reason latest.reason level
| append
[| rest splunk_server=local /services/cluster/manager/fixup level=search_factor
| table index title initial.reason latest.reason level ]
| join title
[| rest splunk_server=local /services/cluster/manager/buckets f=title f=frozen search="frozen=0"]
| stats values(level) AS level values(frozen) AS frozen values(initial.reason) AS initial.reason values(latest.reason) AS latest.reason BY index title
|
| 2021-05-07 | SPL-205462, SPL-210602, SPL-211950, SPL-214324 | Indexers running out of space - Splunk not honoring the 'maxVolumeDataSizeMB' setting Workaround:
Search to see the configured and reported size per volume for an instance: index=_introspection source=*disk_objects* component=Volumes host="<indexer in question>" | timechart max(data.max_size) max(data.total_size) BY data.name
|
| 2021-01-13 | SPL-199337, SPL-199928 | ProcessDispatchedSearch - PROCESS_SEARCH - Failed opening "": No such file or directory Workaround: In order to reduce disk/error impact/consumption by splunk I provided steps to filter out those events. |
| 2019-10-21 | SPL-178220, SPL-179596 | Cluster master can crash after triggering of data rebalance or primary rebalance Workaround: Extend rebalance_primaries_execution_limit_ms to half of rcv_timeout. |
| 2018-10-23 | SPL-161815 | Thawed buckets in a indexer cluster are sporadically unsearchable upon restart |
| 2017-03-16 | SPL-138846 | In multisite clustering, deletion of events in hot buckets is not pushed to other sites |
| 2016-08-25 | SPL-127353 | Data rebalance finishes early when one peer is the source for all buckets Workaround: when only one indexer in a cluster indexed data (has all the searchable copies), rebalance once before adding the new indexer, and then rebalance a second time |
| 2015-05-08 | SPL-101184 | Rolling restart in an Indexer Cluster may not be successful on a peer if a oneshot command is also running on that peer. Perform a manual restart to revive the peer. |
| 2014-10-13 | SPL-91861 | On Windows indexer on an ec2 instance, splunk-optimize main thread can crash on buckets on the temporary drive z:\>. |
| 2014-09-29 | SPL-91432 | On Windows when the master is down, the CLI command splunk offlinehangs when run from one of the streaming target peers. |
| 2014-09-08 | SPL-90630 | On a multisite cluster, no warning is given when search head names are the same. |
| 2014-07-29 | SPL-87816 | When implementing an indexer cluster or search head cluster, you cannot set pass4SymmKey in the general stanza. The system default values in the clustering and shclustering stanzas override any user-provided values in the general stanza. Workaround: Set the value in the [clustering] or [shclustering] stanza, depending on the type of cluster you're implementing. |
| 2014-07-14 | SPL-86799 | After adding a new license to the clustering search head, splunkd on restart cannot be reached by splunkweb. |
| 2014-04-29 | SPL-83636 | When configuring a multi-site cluster using cluster-config, the error messages are incorrect if the SF/RF was previously set. |
| 2014-03-18 | SPL-82038 | Cluster-config does not work if a parameter value includes a space character. |
| 2014-03-17 | SPL-81955 | Multisite: Peer takes approximately 6 minutes to restart when its site configuration is changed. |
| 2014-01-06 | SPL-78688 | Peer is able to change to an invalid (empty) replication port |
| 2013-08-06 | SPL-72484 | You cannot use the CLI to delete an index with a capital letter in its name. |
Data Fabric Search issues
| Date filed | Issue number | Description |
|---|---|---|
| 2019-09-02 | SPL-175783 | Search results for the stats function perc95() are different for DFS and Splunk Enterprise Workaround: Use exactpercX(Y) function instead of perc95( ) to get more accurate results. |
| 2019-07-24 | SPL-173766 | Search heads in a distributed search environment are unable to sync on available Spark resources |
Universal forwarder issues
| Date filed | Issue number | Description |
|---|---|---|
| 2020-11-09 | SPL-197140, SPL-234386 | UF failed to start on Solaris 11.3 with error: "symbol in6addr_any: referenced symbol not found" Workaround: 1. Do not upgrade past Splunk 8.0.5 on Solaris 11.3 OR
2. Upgrade to Solaris 11.4 |
| 2020-09-29 | SPL-195635, SPL-202178, SPL-206477, SPL-202163, SPL-206534 | Splunkd increased memory usage over time when monitoring UDP port(s) with in inputs.conf |
| 2019-05-28 | SPL-171178, SPL-167307, SPL-202078 | Indexer Acknowledgement causes metric index events that do not have "_raw" fields to be duplicated Workaround: Indexer acknowledgement is a feature that helps prevent loss of data when forwarders send data to an indexer. Indexer acknowledgement is controlled by the Boolean useACK setting in inputs.conf and outputs.conf.
Indexer acknowledgement uses the When this issue occurs, the workaround is to set |
| 2018-04-10 | SPL-153251 | Universal Forwarder txz package cannot be installed on FreeBSD 11.1 Workaround: 1. Use pkg install instead of pkg add OR
2. Install package by untarring tgz file to /opt/splunkforwarder |
| 2017-05-23 | SPL-141961 | Older 6.0, 6.1, 6.2, 6.3 maintenance release versions unable to connect to 6.6.x and later via management port. Workaround: This applies to License Master/Slave, Deployment Server/Client, Cluster Master/Peers, Search Head/Peers and affects Splunk 6.6.x and the following versions:
Upgrade your older instances to the latest maintenance releases or on your 6.6.x Splunk instances. Add the following stanza to server.conf: [sslConfig]
|
| 2017-03-20 | SPL-139019 | Possible compatibility issues between Python / SDK clients and new 6.6 and later default sslVersions, cipherSuites Workaround: Users can do either of the following: 1. Overwrite the new Splunk 6.6 server.conf [sslConfig] sslVersions, cipherSuites with your own settings that are compatible with your version of OpenSSL, e.g. the previous defaults from 6.5.x are compatible with OpenSSL 0.9.8 on Mac OSX: [sslConfig] 2. For some more up-to-date clients, it is possible to enforce TLS1.2 (e.g. --tlsv1.2 for curl) in order to connect successfully. 3. Upgrade OpenSSL on your platform and link it with your client (e.g. Python, curl, etc..). For example, OpenSSL 1.0.2 is currently available on Mac OSX via Homebrew (see https://brew.sh) and is compatible with the new Splunk 6.6 default sslVersions, cipherSuites. |
| 2017-03-14 | SPL-138731 | New 6.6 and later default SHA256/2048-bit key certificates are not compatible with previous versions SHA1/1024-bit key certificates if cert verification is enabled Workaround: Users can do any of the following: 1. Disable certificate verification - the same root certificate is available with every Splunk download so enabling certificate verification while using the default certificates provides very little additional security. 2. Generate new SHA256/2048-bit key certificates using the new 6.6 root certificate and distribute to older versions of Splunk 3. Generate SHA1/1024-bit key certificates using the old root certificate to use with your new 6.6 instance. For convenience, the old root certificate is included in 6.6 in $SPLUNK_HOME/etc/auth/prev_release/ |
| 2015-06-10 | SPL-103010 | Indexing throughput on a forwarder with four pipelinesets drops 30% compared to a forwarder with two pipelinesets. |
| 2015-04-14 | SPL-99687, SPL-129637 | Splunk universal forwarder is 7-10 days behind recent Windows Security and system log events. Workaround: To mitigate this, edit the following stanza in inputs.conf: [WinEventLog://Security] evt_resolve_ad_obj = 0. |
| 2015-04-07 | SPL-99316 | Universal Forwarders stop sending data repeatedly throughout the day Workaround: In limits.conf, try changing file_tracking_db_threshold_mb in the [inputproc] stanza to a lower value. |
| 2015-03-25 | SPL-98594 | Routing events to two different groups not working as expected. Workaround: 1 On the original UF, instead of configuring 1 s2s and 1 syslog group, configure 2 s2s groups. 2 Setup a proxy UF which takes input from the original UF and send input out syslog server.
This solution only requires config change and no patch release is required. |
| 2014-08-05 | SPL-88396 | After configuring a client name for a deployment client, the name is not shown in the Forwarder Management UI Workaround: Create a server class, where you can see the client name, and use that group when you add data. |
Distributed deployment, forwarder, deployment server issues
| Date filed | Issue number | Description |
|---|---|---|
| 2014-10-02 | SPL-91648, SPL-91358 | Forwarder unable to push scripted inputs to a Linux deployment client from a Windows deployment server. |
| 2014-08-15 | SPL-89333 | Using client filtering in forwarder management interface when the deployment server is servicing a large numbers of deployment clients (over approximately 5000) can cause a temporary spike in memory usage. |
| 2014-06-20 | SPL-85739 | When running a high number of deployment clients for a server, memory growth may be excessive. Workaround: To mitigate this, set forceHttp10=always. |
Monitoring Console issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-03-29 | SPL-203100 | Summary page on monitoring console doesn't show correct RF/SF when not running on the CM. |
| 2021-01-19 | SPL-199534, SPL-201388, SPL-201386, SPL-201838 | "DMC Alert - Total License Usage Near Daily Quota" does not work in case of fixed-sourcetype license |
| 2019-11-13 | SPL-179528 | The splunktcp and splunktcp-ssl stanzas are not reloadable in inputs.conf |
| 2017-08-18 | SPL-144193 | Bundle validation errors prevent future app deployment to indexer cluster |
| 2017-08-14 | SPL-143981 | Uninstall app dialog does not show the app name correctly when the app doesn't have the label |
| 2017-08-04 | SPL-143664 | Uploaded apps page makes two calls to packages endpoint |
| 2017-05-24 | SPL-141982 | Upload modal should use size=large File element |
| 2017-04-19 | SPL-141274 | Clicking Install multiple times in Install dialog causes error |
| 2017-04-19 | SPL-141273 | Task endpoint fetch once even when there's no last deploy task id |
| 2017-03-07 | SPL-138351, SPL-172626 | The role change of DMC via UI does not reflect to distsearch.conf Workaround: As a workaround can the customer manually modify the distsearch.conf. |
| 2016-11-14 | SPL-132151 | XML error when trying to download uninstalled app |
Splunk Web and interface issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-06-05 | SPL-206833, SPL-213035, SPL-213036, SPL-213029 | ProxySSO broken on SH cluster after upgrading Splunk from 7.2.5 to 8.0.7. Web browser shows Bad request, HTTP Request was malformed. |
| 2020-07-13 | SPL-191877, SPL-191342 | All event types are extracted for numeric _raw data |
| 2019-07-11 | SPL-173061 | UI exposes a nonfunctional option for modifying permissions on custom search commands |
| 2017-08-23 | SPL-144350 | Archived Index is created without error when the splunk index is invalid |
| 2017-07-13 | SPL-143111 | "Splunkd daemon is not responding" when edit local windows event log collection |
| 2016-11-14 | SPL-132133 | App Browser filtering of the apps does not work |
| 2015-11-09 | SPL-109165 | Interactive Field Extractor hangs when using "^" as delimiter. Workaround: Use props and transforms to specify the delimiter of your choice. |
| 2015-08-10 | SPL-105061, SOLNESS-7274 | Broken module prevents splunkweb from starting |
| 2015-06-30 | SPL-103701 | Actions links should be removed for "Apps Browser" |
| 2014-07-16 | SPL-87015 | chart count by source and *| cluster showcount=t | table cluster_count _raw) no metadata/ result is available when user drills down on Count and Percent columns. |
| 2014-04-04 | SPL-82650 | A report created and scheduled by admin cannot be embedded by a power user. |
| 2014-02-26 | SPL-81103 | Username surrounded by dollar signs cannot create saved searches. |
| 2013-08-19 | SPL-73386 | Users are not allowed to run historical scheduled search Workaround: 1. Create a special power/admin user who can run scheduled searches. 2. Assign this user ownership of the scheduled searches. 3. Share the searches at the app level and grant read/write permission to the correct set of users. |
Windows-specific issues
| Date filed | Issue number | Description |
|---|---|---|
| 2015-04-14 | SPL-99687, SPL-129637 | Splunk universal forwarder is 7-10 days behind recent Windows Security and system log events. Workaround: To mitigate this, edit the following stanza in inputs.conf: [WinEventLog://Security] evt_resolve_ad_obj = 0. |
| 2015-04-01 | SPL-98978 | On differing versions of Splunk Enterprise indexer (5.0.1) and universal forwarder (6.2.2), collection of the Security Event log can take increasingly longer over time. Workaround: To fix the problem, restart Windows on the forwarder.
|
| 2014-10-31 | SPL-92596 | After upgrade from Splunk Enterprise 6.1 or earlier to 6.4.x on Windows, splunkweb service does not start automatically. Attempts to start it manually show "Error 1053: The service did not respond to the start or control request in a timely fashion." Workaround: This is expected behavior. See the Splunk Answers post: http://answers.splunk.com/answers/177187/why-is-the-splunk-web-service-not-running-after-an.html |
| 2014-09-25 | SPL-91279 | Splunk Universal Forwarder on Windows (specifically, the splunk-perfmon.exe process) does not release key handles. Workaround: See "Handle leak when an application collects performance data in Windows Vista, in Windows 7, in Windows Server 2008 or in Windows Server 2008 R2" on the Microsoft Support website for a hotfix download. |
| 2013-10-11 | SPL-75116 | The UI does not show configured items of some newly converted windows modular inputs that contain the name "default" in the stanza Workaround: Edit inputs.conf: in stanzas that contain WinRegMon://default, replace "default" with something else, then restart splunk. |
REST, Simple XML, and Advanced XML issues
| Date filed | Issue number | Description |
|---|---|---|
| 2017-07-13 | SPL-143111 | "Splunkd daemon is not responding" when edit local windows event log collection |
| 2016-10-31 | SPL-131072 | Datamodel backend allows invalid time values |
| 2013-05-15 | SPL-67453 | When sending the following XML data as a GET or POST param to a custom splunkd endpoint: <dashboard><foo></dashboard>, the endpoint actually receives:<dashboard><foo></dashboard>. |
PDF issues
| Date filed | Issue number | Description |
|---|---|---|
| 2016-11-23 | SPL-132925 | Table data rows generated with the addcoltotals command do not show up in PDF Workaround: If you are using addcoltotals to generate a totals data row, renaming the _time field can cause PDF generation issues.
Remove the label and |
| 2015-03-31 | SPL-98890 | Maps printed from Report page do not honor custom zoom and center. |
| 2014-06-16 | SPL-85497 | Unable to save generated PDFs using Chrome internal PDF viewer. Workaround: Workaround: Enable Adobe Acrobat or Acrobat Reader as the default PDF viewer in Chrome. For more information, seehttps://support.google.com/chrome/answer/142056.
|
Admin and CLI issues
| Date filed | Issue number | Description |
|---|---|---|
| 2020-04-14 | SPL-186365 | Users are able to create/clone knowledge objects into apps where they lack permissions |
| 2019-08-05 | SPL-174406, SPL-109254 | Root unable to run splunk cli if SPLUNK_OS_USER is set |
| 2017-11-29 | SPL-146820 | Unable to access some settings/manager pages (data model editor) if starting from the setup page of a non-visible app Workaround: Navigate to a visible app, such as the search and reporting app, and access the Splunk settings pages from that app context. |
| 2017-04-11 | SPL-141051 | When LINE_BREAKER is defined for a sourcetype, UI forces SHOULD_LINEMERGE to true Workaround: None in Splunk Cloud. For on-prem, manually edit the props.conf file to set SHOULD_LINEMERGE to 'false'. |
| 2017-04-03 | SPL-140747 | SSL connection in Python when using new ciphers may be slow. |
| 2016-11-09 | SPL-131880 | Reports/Alerts owned by the deleted user cannot be found in the Orphaned filter for the Reassign Knowledge Objects page |
| 2015-09-23 | SPL-106978 | Failed SHC captain election causes unnecessary change in server.conf |
| 2015-03-11 | SPL-97942 | Capability defined in an app does not take effect when assigned to a role Workaround: The workaround is to change the ui-prefs in ./etc/users/username/local/ui-prefs.conf to look like this: [search]
display.events.fields = ["description","except_extract_1","except_extract_2","except_extract_3","sap_order_status","sourcetype","source","status","request_mode","request_id","request_status_id","object_id","BillToCity_","Airline_","BillToName_","BillToCountry_","City_"]
display.events.type = table |
| 2014-04-07 | SPL-82699 | SSO: Acceleration icon fails to display in Searches, Reports, and Alerts page. |
| 2013-05-25 | SPL-68010 | The error thrown when your Splunk instance cannot connect to splunkbase/.../checkforupdate is not an ERROR, should be lowered to INFO. Workaround: Set server.conf [applicationsManager] allowInternetAccess = false |
| 2013-05-02 | SPL-66511 | If $SPLUNK_HOME/etc is located on a case-insensitive filesystem, creating a new view with the same name as an existing view but with different case (capital letters vs lowercase, etc) silently overwrites the existing view. |
Uncategorized issues
| Date filed | Issue number | Description |
|---|---|---|
| 2021-07-05 | SPL-208338, SPL-208754, SPL-210528, SPL-210529 | When using a License Manager that has both ITSI and Hunk license installed, all connected Splunk instances are showing Hunk branding |
| 2021-05-26 | SPL-206284, SPL-204489 | Many events from internal logs are directed to malformedEventIndex |
| 2021-05-02 | SPL-205109 | Excessive WARN ScopedLDAPConnection "Converting non-UTF-8 value to" in the splunkd.log file |
| 2020-12-17 | SPL-198752, SPL-199561, SPL-198941 | Index time extraction length limitation |
| 2020-10-09 | SPL-196157 | SPLUNK_OS_USER in splunk-launch.conf does not work with sssd Workaround: If using SSSD the attribute 'enumerate' is set to false by default, this will need to be change to true, as per this article: https://sssd.io/docs/users/faq.html
This will use more resources but will allow the user to use the splunk-launch.conf file. |
| 2020-08-20 | SPL-193996, SPL-186425 | SmartStore: Rebuilding an evicted DMA summary causes us to re-upload the old tsidx file with the newly rebuilt one |
| 2019-11-05 | SPL-180436 | Index creation causing rolling restart on cloud stack due to DEFAULT.conf |
| 2019-10-03 | SPL-177447 | Bundle replication takes longer than expected time for indexers that have bundleEnforcerBlacklist configured |
| 2019-09-26 | SPL-177144, SPL-177326 | Under heavy search workload, the search memory usage estimation may be higher than actual usage |
| 2019-09-25 | SPL-177008, SPL-176710, SPL-177009 | Workload management fails to enable for addition of a pool with 1% cpu and 1% memory |
| 2019-09-16 | SPL-176514 | Offline rebuild of unsearchable bucket may lead to stale information in dbinspect searches |
| 2019-07-19 | SPL-173449, SPL-173259 | timezone isn't stored for start_time/end_time of rule schedule every_day/every_week/every_month |
| 2019-06-05 | SPL-171553, SPL-171647 | Smartstore: S3 GET is being done before S3 PUT for the receipt.json causing 404 errors (Source peer should not check if the bucket/receipt exists during uploads) |
| 2019-03-26 | SPL-168314 | SmartStore standalone instance + Monitoring Console: Bootstrapping panel needs to reflect the standalone bootstrapping process |
| 2019-01-17 | SPL-165085 | SLIM Partition missing indexer configuration option SEDCMD. Private apps installed by SSAI fail to deploy SEDCMD to indexers. |
| 2018-10-17 | SPL-161632 | Can't install RPM Splunk 7.2+ file in Red Hat EL5 |
| 2018-09-04 | SPL-159598 | mongo 3.4 to 3.6 upgrade sometimes misses fcv document |
| 2018-04-18 | SPL-153555, SPL-152283 | mongod errors out on distros with older glibc (2.7 and below) with " Invalid access at address: 0x10" |
| 2018-03-20 | SPL-152330, SPL-151992 | After installing Splunk on Windows using msiexec and the "GENRANDOMPASSWORD=1" option (and if generated password ends with backslash) admin is unable to login with msg "No users exist. Please set up a new user." Workaround: Create a $SPLUNK_HOME/etc/system/local/user-seed.conf and restart Splunk [user_info] |
| 2018-03-14 | SPL-152095 | Edit Summary Indexing - Index List empty/incomplete for User with Power role after upgrading to 6.6.0+ Workaround: add indexes_edit and dispatch_rest_to_indexers capability to the Power role for all indexes to be listed |
| 2018-01-25 | SPL-148514 | Splunk not starting on Linux kernel version 4.13.0-31 Workaround: Do not upgrade kernel to version 4.13.0-31. Use either an older release or 4.13.0-32.35+ |
| 2017-05-09 | SPL-141693 | DataModel Editor - when child object has same name as inherited field, inherited field does not show in the inherited fields list. |
| 2017-04-27 | SPL-141478, SPL-237563 | $_index_name does not resolve properly when used with the thawedPath pathname |
| 2017-03-27 | SPL-140442, SOLNESS-11786 | In Splunk Enterprise 6.6.0 and later, with Enterprise Security 4.5.2 and 4.6.0, roles without "edit_roles" capability cannot perform operations on notable event review statuses. Workaround: If users cannot perform operations on notable event review statuses or have issues viewing "Edit all selected" links on Incident Review, user roles must be provided with the "edit_roles" capability. |
| 2017-01-18 | SPL-135260 | Documentation for Search formatting keyboard shortcut for non-English languages |
| 2017-01-06 | SPL-134707 | Splunk restart does not create missing server.pem certificate on Windows Workaround: Use bin/splunk createssl server-cert -d etc/auth/ -n server to generate a new certificate. |
| 2016-11-21 | SPL-132670 | Mac OS 10.11: disable boot-start doesn't remove the file /Library/LaunchAgents//com.splunk.plist by enabling boot-start in prior Splunk/UF |
| 2016-08-31 | SPL-127800 | Opting in to data sharing on a monitoring console produces duplicate data |
| 2016-07-26 | SPL-125052 | Sole Admin can demote themself to Power without path of recovery in GUI. Workaround: Through the command line, you can open notepad and modify the password file to regain 'Admin' status. |
| 2016-06-21 | SPL-123174 | JSON indexed_extractions doesn't work for TCP inputs |
| 2015-10-07 | SPL-107606 | Inconsistency between summary and datamodel_summary files. |
| 2015-06-18 | SPL-103302 | Files ownership are failed to be changed when using debian package to install splunk and $SPLUNK_HOME is a symlink Workaround: Run a recursive chown from the command line on $SPLUNK_HOME manually, post install. |
| 2015-05-24 | SPL-102008 | On Internet Explorer, a warning message does not display when you cannot log in due to a time zone difference. |
| 2015-05-11 | SPL-101289 | When the number of indexing pipeline sets is greater than four, indexing throughput decreases. |
| 2015-05-06 | SPL-100980 | Single indexer does not scale when receiving parsed data from multiple PipelineSets. |
| 2015-05-04 | SPL-100792 | There are multiple group=thruput metrics lines in metrics.log. Searches that do not differentiate among them may get falsely high totals. Workaround: Searches that key off these lines need to select their desired name=x category in order to see a single thruput value. |
| 2015-04-24 | SPL-100322 | A view gets stuck with "loading" due to problematic navigation (default.xml) Workaround: Workaround is to use label attribute for collection element. <collection label="Others"> <view source="unclassified" match="Dashboard"/>
</collection>
|
| 2015-03-26 | SPL-98700 | splunkd Indexer crashes in IndexerTPoolWorker due to duplicated bucket id. Workaround: The workaround is to remove the duplicated bucket. |
| 2015-02-26 | SPL-97389 | When using timechart command, the embedded report shows different time format than the original report. |
| 2015-01-08 | SPL-95144, SPL-101986, SPL-101987, SPL-106884, SPL-107317, SPL-142789 | Indexed message for Windows security event logs shows "FormatMessage error" Workaround: Splunk believes this was introduced in a Microsoft Windows patch. The workaround is to configure a delayed start of the Splunk service(s) so that it starts after the Windows Event Log service. |
| 2014-11-10 | SPL-92831 | A mismatch of versions between the license-master and the license-slave is generating Warning messages like "WARN LMDirective - directive cmd=D_set_feature_state args='Acceleration,ENABLED' failed: reason='feature='Acceleration' is invalid' ." Workaround: The warnings can be ignored, the workaround is use same major versions (all on 6.2 or all on 6.1).
|
| 2014-10-24 | SPL-92432, SPL-99583 | Chart in dashboard panel does not honor interval settings. Workaround: In the panel XML, specify a larger height to use the correct interval settings. |
| 2014-10-17 | SPL-92162 | Writing large amounts of data (> 20 GB) to KV store collections using outputlookup can result in high memory usage on the machine. |
| 2014-09-11 | SPL-90738 | Monitoring a directory with an unknown sourcetype produces indexing errors. |
| 2014-08-26 | SPL-90139 | <timestamp> does not display in the Patterns tab when searches are run in fast mode. |
| 2014-04-22 | SPL-83365 | Splunk Enterprise on Windows does not show an error message when a user without the edit_license capability tries to add a license through the CLI. |
| 2014-04-14 | SPL-83068 | Default index can be set to random index. |
| 2014-04-01 | SPL-82517, SPL-208875 | Paper Size and Layout in PDF Schedule dialog do not respect Paper Size and Layout in Email Settings. |
| 2014-03-23 | SPL-82238 | Datamodel fails to drill down further when the same attribute for Split Rows and Split Columns are selected. |
| 2014-03-13 | SPL-81856 | Show all lines does not work in data model editor preview. |
| 2014-03-12 | SPL-81810 | Licensing - license pool warning at license master keeps coming back after deleting it. Workaround: Delete the warnings on the peers first, then the License Manager. |
| 2014-03-12 | SPL-81781 | In the Data Model Manager, "Acceleration Status" and "Access Count" fail to update when you click "Update". |
| 2014-02-13 | SPL-80568 | Highcharts determines Y-axis values based on first point outside visible range. |
| 2014-02-07 | SPL-80285 | In the Data Model Editor, the Edit Lookup page is blank if Lookup is shared only in Lookup Definitions. Workaround: For more information, see Add lookup files to Splunk. |
| 2014-02-06 | SPL-80187 | In the Data Model Editor, lookup pages open with options displayed for other Lookup when the data model definition is private but the file is app or globally shared. Workaround: Share the definition. For more information, see Add lookup files to Splunk. |
| 2014-01-31 | SPL-79842 | On Windows, Indexer doesnt accept new connections on splunktcpin port after queue blockage is resolved |
| 2013-11-27 | SPL-77139 | Licenser pool usage gets reflected only after restarting splunkd. |
| 2013-10-29 | SPL-75764 | Forwarder forwards duplicate data after props.conf is in place for cross platform scenario/when the forwarder is on Solaris and the indexer is on Linux. |
| 2013-09-13 | SPL-74337, BETA-496 | You cannot specify a destination folder when installing on OSX. |
| 2013-09-10 | SPL-74209, SPL-74167 | Persistent queues are not created on Windows for stanzas that contain unusual characters (such as < and >). Workaround: Specify the persistentQueue explicitly in the input definition. |
| 2013-08-28 | SPL-73826 | Windows: hostname override not working properly |
| 2012-02-22 | SPL-48342 | LDAP strategy host field cannot work with ipv6 format address but computer name is okay |
| 2010-10-08 | SPL-34347 | wmi input default fields - with value including newlines doesn't search properly becasue of \r\n issue |
Splunk Analytics Workspace
| Date filed | Issue number | Description |
|---|---|---|
| 2019-09-16 | MAW-3037, MAW-3066 | Error may occur when saving an alert on a duplicate series Workaround: Identical series added to a chart are de-duplicated. When saving an alert, select the visible series, instead of the the de-duplicated one to avoid an error. |
| 2019-08-26 | MAW-2963 | Opening a chart from dashboard does not respect saved chart type Workaround: After opening a chart from dashboard, you can change the chart mode to the original mode via the Analysis Panel. |
Splunk Analytics for Hadoop
| Date filed | Issue number | Description |
|---|---|---|
| 2017-04-04 | ERP-2040 | Splunk archiving fails for large block sizes (buckets) due to HDFS write crashes for Hadoop version 2.8, 2.7.x Workaround: Upgrade Hadoop to 2.8.2 or higher. |
| 2015-09-09 | ERP-1650 | timestamp data type not properly deserialized. |
| 2015-08-05 | ERP-1619 | Searching on a newly created archive index before the bucket copy saved search is run causes a filenotfound exception. Workaround: Reenable the bucket copy saved search and let it run, or force the archiving to happen via | archivebuckets force=1 and then rerun the search. |
| 2015-07-07 | ERP-1598 | minsplit rampup - splits generation takes too long. Workaround: Set minsplits=maxsplits |
| 2015-05-12 | ERP-1502 | Non-accelerated pivot search on Pivot UI page waits for a long time to return result. |
| 2015-01-08 | ERP-1343, SPL-95174 | Splunk Analytics for Hadoop searches fail on corrupted journal.gz files, although Splunk searches run without error. Workaround: Add the journal.gz to the input path's blacklist (vix.input.1.ignore = ....) |
| 2014-10-27 | ERP-1216 | Data Explorer preview does not honor existing sourcetypes for big5/sjis files. |
| 2014-10-03 | ERP-1164 | Report acceleration summary gets deleted when two Splunk Analytics for Hadoop instances point to the same Splunk working directory. Workaround: To mitigate this issue, make sure that vix.splunk.home.hdfs (or Working directory in the UI) is unique on both search heads that are not in a pool. To keep your instances in the same working directory, configure vix.splunk.search.cache.path to be unique on both search heads. |
Last modified on 10 December, 2024
| Welcome to Splunk Enterprise 8.0 | Splunk Enterprise and anti-virus products |
This documentation applies to the following versions of Splunk® Enterprise: 8.0.7
Download manual
Feedback submitted, thanks!