Configure workload rules
Workload rules provide an automated method for assigning searches to workload pools and monitoring running searches. The rules are evaluated in the order in which they are listed. If a search meets the predicate condition defined in a rule, a specified action is taken. Workload rules are evaluated for every new search and reevaluated every 10 seconds.
There are two types of workload rules:
- Search placement rules
- Search monitoring rules
Search placement rules determine the pool in which a search is placed when you start a search. Predicates that you can define to control search placement include
search_time_range. You can use search placement rules to ensure that high-priority searches are assigned to pools that provide adequate resources, while low-priority searches are restricted.
Search monitoring rules automatically trigger actions on running searches based on the defined rule predicate and the status of the search. When you create a monitoring rule, you must specify a
runtime value in the predicate. If a search exceeds the
runtime value, workload management performs the specified action. Supported actions are
Display in Messages, and
Move search to alternate Pool. You can use monitoring rules to manage heavy search loads and prevent rogue processes from monopolizing pool resources.
Create a workload rule
You can create and edit workload rules using Splunk Web, the CLI, or REST API. Workload rule configurations are stored in
workload_rules.conf. See View workload_rules.conf.
Create a workload rule in Splunk Web
- In Splunk Web, click Settings > Workload Management.
- Click Add Workload Rule.
- Define the following fields to configure a new workload rule:
Field Action Name Specify the name of the workload rule. Predicate (Condition) Specify a predicate (condition) that must match for a search to access the specified workload pool. The predicate syntax is <type>=<value> with optional AND, OR, NOT, (). For example,
app=search AND role=powermaps all searches belonging to the Search app executed by a user that belongs to the power role to the corresponding workload pool.
Valid predicate types are
For supported predicate values, see Predicate type values in the next section on this page.
In complex predicates,
NOToperators must be upper case. Lower case is not supported.
Schedule (Optional) Set a schedule for the workload rule. The schedule determines the time period during which the rule is valid.
If set to
Always On(the default), the rule remains valid indefinitely and does not expire.
If set to
Time Range, the rule is valid during the specified time range only and expires when the time range ends.
If set to
Every Week, or
Every Month, the rule becomes valid on a recurring basis during the specified time range every day, on the specified days of the week, or on the specified days of the month.
The schedule time for a workload rule is based on the system timezone, regardless of the timezone set for an individual user in the UI.
Action Specify the action to perform when a search meets the predicate condition.
Place search in a Pool(the default) assigns searches that meet the predicate condition to the specified workload pool.
Abort searchkills the search process.
Display a Messageshows a message in the job inspector to users that have all of the following required capabilities:
Move search to alternate Poolmoves the running search to a different specified pool.
Display a Message, and
Move search to alternate Poolactions apply to in-progress searches only. You must specify a
runtimecondition to enable these actions. For example, the predicate
index=_internal AND runtime>1mtriggers the specified action on all searches that contain
index=_internaland run for more than one minute.
Place search in a poolaction is not valid with rules containing a
Display a Message, and
Move search to alternate Poolactions are valid only when a
Workload Pool Select the workload pool to which this rule applies. User Message Enter a custom message that notifies the end user when a search triggers the workload rule action. For example, "Search runtime exceeded 30 seconds. The search was moved to the high_perf pool."
A user message is required with the
Display a Messageaction, and is optional for other actions.
When a search triggers the rule action, the user message appears in the Jobs manager in Splunk Web: Click Activity > Jobs > Job. It also appears under the Job menu in the Search app.
- Click Submit.
Predicate type values
The following table shows valid values for each workload rule predicate type:
|Predicate type||Valid values|
||Name of the app. For example, |
The correct name to specify for an app is the name of the app directory located in
||Name of the role. For example, |
For important details on
||Name of the index. For example, |
||Name of any valid user. For example, |
||An absolute time range during which the rule is valid. Currently supports the value |
||The amount of time that a search must run in a workload pool to trigger a specified action, such as |
Valid units for
Searches run by a single user can match multiple roles
By default, the
admin role in Splunk Enterprise inherits the
user role and the
power role. As a result of this role inheritance, in workload management, searches run by a single user can match to multiple roles in workload rules. For example, searches run by the "admin" user can match to workload rules that specify
To avoid having a single user, such as the "admin" user, match to multiple roles in your workload rules, specify
user=<username> in the rule predicate as an alternative to specifying
For more information on role inheritance, see About configuring role-based user access in Securing Splunk Enterprise.
For more information on workload rule configuration settings, see workload_rules.conf in the Admin Manual.
Create a workload rule using the CLI
To create a workload rule using the CLI, run the
splunk add workload-rule command as follows, where
predicate has the syntax <type>=<value> with optional AND, NOT, OR, ():
./splunk add workload-rule <rule_name> -predicate <predicate> -workload_pool <pool_name>
./splunk add workload-rule "my_role_rule" -predicate "app=search AND (NOT index=_internal)" \ -workload_pool "pool_a"
To create a workload monitoring rule, the
-predicate value must include a
runtime condition, and specify the
-action value. For the "move" action, you must also specify the destination
-workload_pool value. For example:
./splunk add workload-rule "my_monitoring_rule" \ -predicate "(role!=admin AND (search_time_range=alltime OR index=*)) AND runtime>10m" \ -action <abort|move> -workload_pool "pool_b"
It is a best practice to use parentheses to group predicate conditions for clarity.
Create a workload rule using REST
Send a POST request to the following endpoint:
For endpoint details, see workloads/rules in the REST API Reference Manual.
Enable workload rules
For instructions on how to enable and disable workload rules, see Enable individual workload rules.
When you create a workload rule using Splunk Web, the CLI, or REST, the rule configuration is stored in
$SPLUNK_HOME/etc/apps/<app_name>/local/workload_rules.conf. The default app context is
It is not advisable to manually edit
workload_rules.conf. If a manual edit of
workload_rules.conf does occur, you must reload the file. Restart is not required.
workload_rules.conf contains workload rule definitions that determine the order in which rules are evaluated, the mapping of rules to workload pools, the schedule for rules, and workload monitoring rules and actions. For example:
[workload_rules_order] rules = test_placement,test_abort,test_move [workload_rule:test_placement] predicate = app="search" AND (NOT index="_internal") workload_pool = low_priority_pool [workload_rule:test_abort] action = abort predicate = index=* AND runtime>5seconds user_message = This search contains a wildcards and has exceeded the maximum runtime. [workload_rule:test_move] action = move predicate = index=_internal AND runtime>5s user_message = This search has been moved to an alternate workload pool. workload_pool = low_priority_pool [search_filter_rule:admission_rule_1] action = filter predicate = index=* AND search_time_range=alltime user_message = This search meets the predicate condition of admission_rule_1. The search cannot be executed.
For more information on workload rule settings, see workload_rules.conf.
Monitor triggered workload rule actions in the job inspector
When a running search triggers a workload rule action, information about the action appears in the Search job inspector. This includes the action that was taken on the search and the timestamp. If a search triggers multiple rules, the information appears in reverse chronological order.
To view details of a workload rule action:
- In Splunk Web, click Activity > Jobs.
- Find the specific search job and click Job > Inspect Job > Search job properties.
- View the details of the workload rule action under the
For more information on monitoring workload rule actions, see Monitor workload management using the Monitoring console.
Configure workload pools
Enable workload management
This documentation applies to the following versions of Splunk® Enterprise: 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6, 8.1.7