Splunk® Enterprise

Getting Data In

Splunk Enterprise version 9.0 will no longer be supported as of June 14, 2024. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.

Resolve data quality issues

You can troubleshoot the following event processing and data quality issues when you get data in to the Splunk platform:

  • Incorrect line breaking
  • Incorrect event breaking
  • Incorrect timestamp extraction

Line breaking issues

The following symptoms indicate that there might be issues with line breaking:

  • You have fewer events than you expect and the events are very large, especially if your events are single-line events.
  • The Monitoring Console Data Quality dashboard displays issues with line breaking.
  • You might see the following error message in the Splunk Web Data Input workflow or in the splunkd.log file: "Truncating line because limit of 10000 bytes has been exceeded".

Diagnosis

To confirm that the Splunk platform has line breaking issues, do one or more of the following troubleshooting steps:

  • Visit the Monitoring Console Data Quality dashboard. Check the dashboard table for line breaking issues. See About the Monitoring Console in Monitoring Splunk Enterprise.
  • Look for messages in the splunkd.log file like the following example:
12-12-2016 13:45:48.709 -0800 WARN LineBreakingProcessor - Truncating line because limit of 10000 bytes has been exceeded with a line length >= 301367
  • Search for events. Multiple combined events, or a single event broken into many, indicates a line breaking issue.

Solution

To resolve line breaking issues, complete these steps in Splunk Web:

  1. Click Settings > Add Data.
  2. Click Upload to test by uploading a file or Monitor to redo the monitor input.
  3. Select a file with a sample of your data.
  4. Click Next.
  5. On the Set Source Type page, work with the options on the left panel until your sample data is correctly broken into events. To configure LINE_BREAKER or TRUNCATE, click Advanced.
  6. Complete the data input workflow or record the correct settings and use them to correct your existing input configurations.

While you work with the options on the Set Source Type page, the LINE_BREAKER setting might not be properly set. The LINE_BREAKER setting must have a capturing group and the group must match the events.

For example, you might have a value of LINE_BREAKER that is not matched. Look for messages with "Truncating line because limit of 10000 bytes has been exceeded" in the splunkd.log file or look for the following message in Splunk Web:

A warning message that says "Truncating line because limit of 10000 bytes has been exceeded with a line length >= 15872".

If you find such a message, do the following:

  1. Confirm that LINE_BREAKER is properly configured to segment your data into lines as you expect.
  2. Confirm that the string you specify in the LINE_BREAKER setting exists in your data.
  3. If LINE_BREAKER is configured correctly but you have very long lines, or if you are using LINE_BREAKER as the only method to define events, bypassing line merging later in the indexing pipeline, confirm that the TRUNCATE setting is large enough to contain the entire data fragment delimited by LINE_BREAKER.
    The default value for TRUNCATE is 10,000. If your events are larger than the TRUNCATE value, you might want to increase the value of TRUNCATE. For performance and memory usage reasons, do not set TRUNCATE to unlimited.

If you do not specify a capturing group, LINE_BREAKER is ignored.

For more information, see Configure event line breaking.

Event breaking or aggregation issues

Event breaking issues can pertain to the BREAK_ONLY_BEFORE_DATE and MAX_EVENTS settings and any props.conf configuration file setting with the keyword BREAK.

You might have aggregation issues if you see the following indicators:

  • Aggregation issues present in the Monitoring Console Data Quality dashboard.
  • An error in the Splunk Web Data Input workflow.
  • Count events. If events are missing and are very large, especially if your events are single-line events, you might have event breaking issues

Diagnosis

To confirm that the Splunk platform has event breaking issues, do one or more of the following troubleshooting steps:

  • View the Monitoring Console Data Quality dashboard.
  • Search for events that are multiple events combined into one.
  • Check splunkd.log for messages such as the following:
    12-07-2016 09:32:32.876 -0500 WARN  AggregatorMiningProcessor - Breaking event because limit of 256 has been exceeded
    12-07-2016 09:32:32.876 -0500 WARN  AggregatorMiningProcessor - Changing breaking behavior for event stream because MAX_EVENTS (256) was exceeded without a single event break. Will set BREAK_ONLY_BEFORE_DATE to False, and unset any MUST_NOT_BREAK_BEFORE or MUST_NOT_BREAK_AFTER rules. Typically this will amount to treating this data as single-line only.

Solution

For line and event breaking, determine whether this issue occurs for one of the following reasons:

  • Your events are properly recognized but are too large for the limits in place. The MAX_EVENTS defines the maximum number of lines in an event.
  • Your events are not properly recognized.

If your events are larger than the limit set in MAX_EVENTS, you can increase limits. Be aware that large events are not optimal for indexing performance, search performance, and resource usage. Large events can be costly to search. The upper values of both limits result in 10,000 characters per line, as defined by TRUNCATE, times 256 lines, as set by MAX_EVENTS. The combination of those two limits is a very large event.

If the cause is that your events are not properly recognized, which is more likely, the Splunk platform is not breaking events properly. Check the following:

  • Your event breaking strategy. The default strategy breaks before the date, so if the Splunk platform does not extract a timestamp, it does not break the event. To diagnose and resolve this issue, investigate timestamp extraction. See How timestamp assignment works.
  • Your event breaking regular expression.

For more information, see the following topics:

Time stamping issues

Time stamping issues can pertain to the following settings in the props.conf configuration file:

  • DATETIME_CONFIG
  • TIME_PREFIX
  • TIME_FORMAT
  • MAX_TIMESTAMP_LOOKAHEAD
  • TZ

You might have timestamp parsing issues if you see the following indicators:

  • Timestamp parsing issues are present in the Monitoring Console Data Quality dashboard.
  • An error occurs in the Splunk Web Data Input workflow.
  • Count events. If you are missing events and have very large events, especially if your events are single-line events, parsing might be a problem.
  • The time zone is not properly assigned.
  • The value of _time assigned by the Splunk platform does not match the time in the raw data.

Diagnosis

To confirm that you have a timestamping issue, do one or more of the following:

  • Visit the Monitoring Console Data Quality dashboard. Check for timestamp parsing issues in the table. Time stamp assignment resorts to various fallbacks. For more details, see How timestamp assignment works. For most of the fallbacks, even if one of them successfully assigns a timestamp, you still get an issue in the Monitoring Console dashboard.
  • Search for events that are multiple events combined into one.
  • Look in the splunkd.log file for messages like the following:
12-09-2016 00:45:29.956 -0800 WARN  DateParserVerbose - Failed to parse timestamp. Defaulting to timestamp of previous event (Fri Dec  9 00:45:27 2016). Context: source::/disk2/sh-demo/splunk/var/log/splunk/entity.log|host::svdev-sh-demo|entity-too_small|682235
12-08-2016 12:33:56.025 -0500 WARN  AggregatorMiningProcessor - Too many events (100K) with the same timestamp: incrementing timestamps 1 second(s) into the future to insure retrievability

All events are indexed with the same timestamp, which makes searching that time range ineffective.

Solution

To resolve a timestamping issue, complete the following steps:

  • Make sure that each event has a complete timestamp, including a year, full date, full time, and a time zone.
  • See Configure timestamp recognition for more possible resolution steps.
Last modified on 31 March, 2021
Troubleshoot the input process  

This documentation applies to the following versions of Splunk® Enterprise: 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6, 7.3.7, 7.3.8, 7.3.9, 8.0.0, 8.0.1, 8.0.2, 8.0.3, 8.0.4, 8.0.5, 8.0.6, 8.0.7, 8.0.8, 8.0.9, 8.0.10, 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6, 8.1.7, 8.1.8, 8.1.9, 8.1.13, 8.1.14, 8.2.0, 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5, 8.2.6, 8.2.7, 8.2.8, 8.2.9, 8.2.10, 8.2.11, 8.2.12, 9.0.0, 9.0.1, 9.0.2, 9.0.3, 9.0.4, 9.0.5, 9.0.6, 9.0.7, 9.0.8, 9.0.9, 9.0.10, 9.1.0, 9.1.1, 9.1.2, 9.1.3, 9.1.4, 9.1.5, 9.1.6, 9.2.0, 9.2.1, 9.2.2, 9.2.3, 9.3.0, 9.3.1, 8.1.0, 8.1.10, 8.1.11, 8.1.12


Was this topic useful?







You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters