Splunk® Enterprise

Distributed Search

Splunk Enterprise version 9.0 will no longer be supported as of June 14, 2024. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk® Enterprise. For documentation on the most recent version, go to the latest release.

Configure parallel reduce search processing

To enable parallel reduce search processing for your deployment, you need to configure your indexers to work as intermediate reducers and determine how your deployment should distribute the parallel reduction workload across your indexers.

See Overview of parallel reduce search processing for an overview of parallel reduce search processing and a list of prerequisites.R

Tasks for configuring parallel reduce search processing

The following table describes common tasks for configuring parallel reduce search processing.

Task Description For more information
Review parallel reduce prerequisites Make sure that your environment is set up properly to support parallel reduce processing. See Overview of parallel reduce search processing for a list of prerequisites to follow before you configure parallel reduce processing in your environment.
Configure your indexers to work as intermediate reducers. Update your indexer configurations by making configuration file updates. See Configure your indexers to work as intermediate reducers.
Determine how your parallel reduction workload is distributed. Consider whether you need to fine-tune configuration settings for load balancing parallel reduce search processing across intermediate reducers and indexers. See Determine how your parallel reduction workload is distributed.
Turn on parallel reduce processing. Configure settings in the limits.conf file to turn on and start using parallel reduce processing in your environment. See Turn on parallel reduce processing.

Configure your indexers to work as intermediate reducers

To update your indexer configurations, you must have access to the server.conf file for your Splunk deployment, located in $SPLUNK_HOME/etc/system/local/. See About configuration files and the topics that follow it in the Admin Manual for more information about making configuration file updates.

Parallel reduce search processing is not site-aware. Do not add this configuration to your indexers if they are in a multisite indexer cluster or if they are non-clustered and spread across several sites.

Determine how your parallel reduction workload is distributed

Settings in the [parallelreduce] stanza of limits.conf determine the number of intermediate reducers that are selected from your indexers for a parallel reduce search process. They also determine how parallel reduce search processing work is distributed across your indexers.

For example, if you keep the default parallel reduce settings in limits.conf, the Splunk platform randomly selects a certain number of intermediate reducers each time you run a parallel reduce search. If all of your indexers are in a single-site indexer cluster, the random selection aids in distributing the parallel reduction workload across the cluster.

However, if your indexers are not clustered, and some of your indexers have large indexing loads on average while others do not, you can use the reducers setting to configure the low-load indexers to be dedicated intermediate reducers. Dedicated intermediate reducers are always used when you run a parallel reduce search process.

These two methods are mutually exclusive. When you set up dedicated intermediate reducers, the Splunk platform cannot randomly select intermediate reducers.

To configure parallel reduce search processing, you must have access to the limits.conf file for your Splunk deployment, located in $SPLUNK_HOME/etc/system/local/. See About configuration files and the topics that follow it in the Admin Manual for more information about making configuration file updates.

Enable random selection of intermediate reducers

Random selection of indexers for intermediate reduction service is ideal if you are running a single-site indexer cluster. If you run several parallel reduce searches concurrently, the random selection ensures that the intermediate reduction work is evenly distributed across the cluster.

The default parallel reduce search processing settings enable the Splunk platform to randomly select intermediate reducers from the larger set of indexers when you run parallel reduce searches. The default number of indexers that the Splunk platform repurposes as intermediate reducers during the intermediate reduce phase of the parallel reduce search process is 50% of the total number of indexers in your indexer pool, up to a maximum of 20 indexers.

Random intermediate reducer selection is determined by the maxReducersPerPhase and winningRate settings. They belong to the [parallelreduce] stanza of limits.conf.

Setting name Definition Default value
maxReducersPerPhase The maximum number of indexers that can be used as intermediate reducers in the intermediate reduce phase of a parallel reduce search. 20
winningRate The percentage of indexers that can be selected from the total pool of indexers and used as intermediate reducers in a parallel reduce search process. This setting applies only when the reducers setting is not configured in limits.conf. See Enable dedicated intermediate reducers. 50

Enable dedicated intermediate reducers

To configure a set of non-clustered indexers as dedicated intermediate reducers, add the reducers setting to the [parallelreduce] stanza in limits.conf.

The value of reducers is a comma-separated list of indexers that you have configured as search peers. Identify each indexer by specifying its host and port using the following format: <host>:<port>. For example:

reducers=docteam-unix-4:8089, docteam-unix-5:8089, docteam-unix-6:8089

Do not include clustered indexers on the reducers list.

All indexers in the reducers list are used as intermediate reducers when you run a parallel reduce search. If the number of indexers in the reducers list exceeds the value of the maxReducersPerPhase setting, the Splunk platform randomly selects the intermediate reducers from the reducers list. For example, if the reducers setting lists five reducers and maxReducersPerPhase=4, the Splunk platform randomly selects four intermediate reducers from the list.

If all of the indexers in the reducers list are down or are otherwise invalid, searches are run without parallel reduction. All reduce operations are processed on the search head.

When you configure the reducers setting for your deployment, the Splunk platform ceases to apply the winningRate setting.

Set a timeout to connect indexers and intermediate reducers

When you run a parallel reduce search, set the rdinPairingTimeout setting in the [parallelreduce] stanza of the limits.conf configuration file to ensure that you provide adequate time to enable the indexers and the intermediate reducers to connect with each other.

The default amount of time that you may wait for pairing the indexers and the intermediate reducers is 30 seconds.

Override the number of intermediate reducers for a specific search

Some complex deployments may need to override the number of reducers that are used to run parallel reduce searches. In these advanced use cases, you can use the redistribute command with the num_of_reducers argument to override the number of reducers. For more information, see redistribute in the Splunk Enterprise Search Reference.

Turn on parallel reduce processing

There are two settings in the limits.conf file that control parallel reduce search processing.

  • To enable parallel reduce on saved searches, set autoAppliedPercentage.
  • To enable parallel reduce on ad hoc searches , set autoAppliedPercentage and autoAppliedToAdhocSearches.

To turn on parallel reduce search processing in your environment, follow these steps.

Prerequisites

  • Only users with file system access, such as system administrators, can edit configuration files.
  • Review the steps in How to edit a configuration file in the Splunk Enterprise Admin Manual.

Never change or copy the configuration files in the default directory. The files in the default directory must remain intact and in their original location. Make changes to the files in the local directory.

Steps

  1. Open or create a local limits.conf file at $SPLUNK_HOME/etc/system/local.
  2. In the [parallelreduce] stanza, add the line autoAppliedPercentage = 100. You can adjust the percentage of saved searches that use parallel reduce processing, but 100% works best for most deployments. All ad hoc searches continue to run without parallel reduce.
  3. To set all ad hoc searches to run with parallel reduce, in the [parallelreduce] stanza, add the line autoAppliedToAdhocSearches = true.

  4. It is not necessary to restart the Splunk platform, however, it might take some time for parallel reduce processing to take effect depending on the search_process_mode setting in the limits.conf.in file.

Last modified on 25 April, 2023
Overview of parallel reduce search processing   About search head clustering

This documentation applies to the following versions of Splunk® Enterprise: 8.2.0, 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5, 8.2.6, 8.2.7, 8.2.8, 8.2.9, 8.2.10, 8.2.11, 8.2.12, 9.0.0, 9.0.1, 9.0.2, 9.0.3, 9.0.4, 9.0.5, 9.0.6, 9.0.7, 9.0.8, 9.0.9, 9.0.10


Was this topic useful?







You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters