Splunk® Enterprise

Managing Indexers and Clusters of Indexers

Use multiple partitions for index data

Note: This topic is not relevant to SmartStore indexes. See About SmartStore.

The indexer can use multiple partitions for its index data. It's possible to configure the indexer to use many disks/partitions/filesystems on the basis of multiple indexes and bucket types, so long as you mount them correctly and point to them properly from indexes.conf. However, for most purposes, the best practice is to use a single high performance file system to hold the index data.

If you do use multiple partitions, the most common way to arrange the index data is to keep the hot/warm buckets on the local machine and to put the cold buckets on a separate array of disks suitable for longer term storage. You'll want to store your hot/warm buckets on a machine with with fast read/write partitions, because most searching will happen there.

Configure multiple partitions

To configure multiple partitions:

1. Set up partitions just as you'd normally set them up in any operating system.

2. Mount the disks/partitions.

3. Edit indexes.conf to point to the correct paths for the partitions. You set paths on a per-index basis, so you can set separate partitions for different indexes. Each index has its own [<index>] stanza, where <index> is the name of the index. These are the main path settings:

  • homePath is the path that contains the hot and warm buckets for the index.
  • coldPath is the path that contains the cold buckets for the index.
  • thawedPath is the path that contains any thawed buckets for the index.

See Configure index path attributes for guidelines on defining index paths.

Last modified on 23 July, 2019
Move the index database   Configure maximum index size

This documentation applies to the following versions of Splunk® Enterprise: 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6, 7.3.7, 7.3.8, 7.3.9, 8.0.0, 8.0.1, 8.0.2, 8.0.3, 8.0.4, 8.0.5, 8.0.6, 8.0.7, 8.0.8, 8.0.9, 8.0.10, 8.1.0, 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6, 8.1.7, 8.1.8, 8.1.9, 8.1.10, 8.1.11, 8.1.12, 8.1.13, 8.1.14, 8.2.0, 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5, 8.2.6, 8.2.7, 8.2.8, 8.2.9, 8.2.10, 8.2.11, 8.2.12, 9.0.0, 9.0.1, 9.0.2, 9.0.3, 9.0.4, 9.0.5, 9.0.6, 9.0.7, 9.0.8, 9.0.9, 9.1.0, 9.1.1, 9.1.2, 9.1.3, 9.1.4, 9.2.0, 9.2.1

Was this topic useful?

You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters