Conversion functions

The following list contains the functions that you can use to mask IP addresses and convert numbers to strings and strings to numbers.

For information about using string and numeric fields in functions, and nesting functions, see Evaluation functions.

ipmask(<mask>,<ip>)

Description

This function generates a new masked IP address by applying a mask to an IP address through a bitwise AND operation. You can use this function to simplify the isolation of an IPv4 address octet without splitting the IP address.

Usage

The <mask> must be a valid IPv4 address. The <IP> must be a valid IPv4 address or a field name where the field value is a valid IPv4 address.

A valid IPv4 address is a quad-dotted notation of four decimal integers, each ranging from 0 to 255.

For the <mask> argument, you can specify one of the default subnet masks such as 255.255.255.0.

You can use this function with the eval command, and as part of eval expressions.

Basic examples

The following example shows how to use the ipmask function with the eval command:

... | eval maskedIP = ipmask("255.255.255.0", "10.20.30.120")

The output of this example is 10.20.30.0.

The following example shows how to use the ipmask function in the SELECT clause of the from command:

... | eval maskedIP = ipmask("0.255.0.244", clientip) AS maskedip

This search masks every IP address in the clientip field and returns the results in an aliased field called maskedip.

The following example shows how to use the ipmask function in the WHERE clause of the from command to filter the events on a specific mask value:

...| where ipmask("0.255.0.224", clientip)="10.20.30.120"

In this example, the masked value is 0.20.0.96.

printf(<format>,<arguments>)

Description

This function builds a string value, based on a string format and the values specified. You can specify zero or more values. The values can be strings, numbers, computations, or fields.

The SPL printf function is similar to the C sprintf() function and similar functions in other languages such as Python, Perl, and Ruby.

Usage

You can use this function with the eval, fieldformat, and where commands, and as part of eval expressions.

format

Description: The format is a character string that can include one or more format conversion specifiers. Each conversion specifier can include optional components such as flag characters, width specifications, and precision specifications. The format must be enclosed in quotation marks.

Syntax: "(%[flags][width][.precision]<conversion_specifier>)..."

arguments

Description: The arguments are optional and can include the width, precision, and the value to format. The value can be a string, number, or field name.

Syntax: [width][.precision][value]

Supported conversion specifiers

The following table describes the supported conversion specifiers.

Conversion specifier	Alias	Description	Examples
%a or %A		Floating point number in hexadecimal format	This example returns the value of pi to 3 decimal points, in hexadecimal format. printf("%.3A",pi()) which returns 0X1.922P+1
%c		Single Unicode code point	This example returns the unicode code point for 65 and the first letter of the string "Foo". printf("%c,%c",65,"Foo") which returns A,F
%d	%i	Signed decimal integer	This example returns the positive or negative integer values, including any signs specified with those values. printf("%d,%i,%d",-2,+4,30) which returns -2,4,30
%e or %E		Floating point number, exponential format	This example returns the number 5139 in exponential format with 2 decimal points. printf("%.2e",5139) which returns 5.14e+03
%f or %F		Floating point number	This example returns the value of pi to 2 decimal points. printf("%.2f",pi()) which returns 3.14
%g or %G		Floating point number. This specifier uses either %e or %f depending on the range of the numbers being formatted.	This example returns the value of pi to 2 decimal points (using the %f specifier) and the number 123 in exponential format with 2 decimal points (using %e specifier). printf("%.2g,%.2g",pi(),123) which returns 3.1,1.2e+02
%o		Unsigned octal number	This example returns the base-8 number for 255. printf("%o",255) which returns 377
%s	%z	String	This example returns the concatenated string values of "foo" and "bar". printf("%s%z", "foo", "bar") which returns foobar
%u		Unsigned, or non-negative, decimal integer	This example returns the integer value of the number in the argument. printf("%u",99) which returns 99
%x or %X	%p	Unsigned hexadecimal number (lowercase or uppercase)	This example returns the hexadecimal values that are equivalent to the numbers in the arguments. This example shows both upper and lowercase results when using this specifier. printf("%x,%X,%p",10,10,10) which returns a,A,A
%%		Percent sign	This example returns the string value with a percent sign. printf("100%%") which returns 100%

Flag characters

The following table describes the supported flag characters.

Flag characters	Description	Examples
single quote or apostrophe ( ' )	Adds commas as the thousands separator.	printf("%'d",12345) which returns 12,345
dash or minus ( - )	Left justify. If this flag is not specified, the result keeps its default justification. The printf function supports right justification of results only when it formats that way by default.	printf("%-4d",1) which returns 1    which is left justified in the output.
zero ( 0 )	Zero pad	This example returns the value in the argument with leading zeros such that the number has 4 digits. printf("%04d",1) which returns 0001
plus ( + )	Always include the sign ( + or - ). If this flag is not specified, the conversion displays a sign only for negative values.	printf("%+4d",1) which returns   +1
<space>	Reserve space for the sign. If the first character of a signed conversion is not a sign or if a signed conversion results in no characters, a <space> is added as a prefixed to the result. If both the <space> and + flags are specified, the <space> flag is ignored.	printf("% -4d",1) which returns    1
hash, number, or pound ( # )	Use an alternate form. For the %o conversion specifier, the # flag increases the precision to force the first digit of the result to be zero. For %x or %X conversion specifiers, a non-zero result has 0x (or 0X) prefixed to it. For %a, %A, %e, %E, %f, %F, %%g , and G conversion specifiers, the result always contains a radix character, even if no digits follow the radix character. Without this flag, a radix character appears in the result of these conversions only if a digit follows it. For %g and %G conversion specifiers, trailing zeros are not removed from the result as they normally are. For other conversion specifiers, the behavior is undefined.	printf("%#x", 1) which returns 0x1

Specifying field width

You can use an asterisk ( * ) with the printf function to return the field width or precision from an argument.

Examples
The following example returns the positive or negative integer values, including any signs specified with those values.

printf("%*d", 5, 123) which returns 123

The following example returns the floating point number with 1 decimal point.

printf("%.*f", 1, 1.23) which returns 1.2

The following example returns the value of pi() in exponential format with 2 decimal points.

printf("%*.*e", 9, 2, pi()) which returns 3.14e+00

The field width can be expressed using a number or an argument denoted with an asterisk ( * ) character.

Field width specifier	Description	Examples
number	The minimum number of characters to print. If the value to print is shorter than this number, the result is padded with blank spaces. The value is not truncated even if the result is larger.
* (asterisk)	The width is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.

Specifying precision

Precision	Description
%d, %i, %o, %u, %x or %X	Precision specifies the minimum number of digits to be return. If the value to be return is shorter than this number, the result is padded with leading zeros. The value is not truncated even if the result is longer. A precision of 0 means that no character is returned for the value 0.
%a or %A, %e or %E, %f or %F	This is the number of digits to be returned after the decimal point. The default is 6 .
%g or %G	This is the maximum number of significant digits to be returned.
%s	This is the maximum number of characters to be returned. By default all characters are printed until the ending null character is encountered.
Specifying the period without a precision value	If the period is specified without an explicit value for precision, 0 is assumed.
Specifying an asterisk for the precision value, for example .*	The precision is not specified in the format string, but as an additional integer value argument preceding the argument that has to be formatted.

Unsupported conversion specifiers

There are a few conversion specifiers from the C sprintf() function that are not supported, including:

•  %C, however %c is supported
•  %n
•  %S, however %s is supported
• %<num>$ specifier for picking which argument to use

Basic examples

This example creates a new field called new_field and creates string values based on the values in field_one and field_two. The values are formatted with 4 digits before the decimal and 4 digits after the decimal. The - specifies to left justify the string values. The 30 specifies the width of the field.

...| eval new_field=printf("%04.4f %-30s",field_one,field_two)

tonumber(<str>,<base>)

Description

This function converts a string <str> to a number. The string can be a field name or a literal value.

Usage

You can use this function with the eval, fieldformat, and where commands, and as part of eval expressions.

The <base> is optional and used to define the base of the number in <str>. The <base> can be 2 to 36. The default is 10 to correspond to the decimal system.

If the tonumber function cannot parse a field value to a number, for example if the value contains a leading and trailing space, the function returns NULL. Use the trim function to remove leading or trailing spaces.

If the tonumber function cannot parse a literal string to a number, it returns an error.

Basic examples

The following example converts the string values for the store_sales field to numbers.

... | eval n=tonumber(store_sales)

The following example takes the hexadecimal number and uses a <base> of 16 to return the number "164".

... | eval n=tonumber("0A4",16)

The following example trims any leading or trailing spaces from the values in the celsius field before converting it to a number.

... | eval temperature=tonumber(trim(celsius))

tostring(<value>,<format>)

Description

This function converts a value to a string. If the value is a number, this function reformats it as a string. If the value is a Boolean value, it returns the corresponding string value, "True" or "False".

Usage

You can use this function with the eval, fieldformat, and where commands, and as part of eval expressions.

The <value> is required.

When used with the eval command, the values might not sort as expected because the values are converted to ASCII. Use the fieldformat command with the tostring function to format the displayed values. The underlying values are not changed with the fieldformat command.

If <value> is a number, the <format> is optional. Supported formats are "hex", "commas", or "duration".

Examples	Description
tostring(<value>,"hex")	Converts the value to hexadecimal.
tostring(<value>,"commas")	Formats the value with commas. If the number includes decimals, the function rounds to nearest two decimal places.
tostring(<value>,"duration")	Converts a value in seconds to the readable time format HH:MM:SS.

Basic examples

The following example returns "True 0xF 12,345.68".

... | eval n=tostring(1==1) + " " + tostring(15, "hex") + " " + tostring(12345.6789, "commas")

The following example returns foo=615 and foo2=00:10:15. The 615 seconds is converted into minutes and seconds.

... | eval foo=615 | eval foo2 = tostring(foo, "duration")

The following example formats the column totalSales to display values with a currency symbol and commas. You must use a period between the currency value and the tostring function.

... | fieldformat totalSales="$".tostring(totalSales,"commas")

See also

Commands

convert

Functions

strptime