Splunk® App for Edge Hub and Augmented Reality

Install and Use Splunk App for Edge Hub

For documentation on other necessary components for Splunk Edge Hub, see the Splunk App for Edge Hub documentation, Splunk Edge Hub mobile app documentation, and Splunk Edge Hub hardware documentation.

Configure multiple Splunk Edge Hub devices

You can create device profiles and apply the configuration to multiple devices using the Splunk App for Edge Hub and AR.

Prerequisites and requirements

This feature requires Splunk App for Edge Hub and AR version 4.7.1 or higher.

Complete the steps at Installation and configuration overview for Splunk Edge Hub OS and register each of your Splunk Edge Hub devices.

Create a device profile

In version the Splunk App for Edge Hub and AR version 4.7.1, you can configure sensor settings in a device profile.

  1. In the Splunk App for Edge Hub and AR, navigate to the Edge Hub Settings page.
  2. Select the Device Profiles tab.
  3. Select + New Profile.
  4. Select and configure the sensors you want to configure for this profile.
  5. Select Save.
  6. Enter a name for the profile.
  7. (Optional) Enter a description for the profile.
  8. Select Save. The profile appears in the Device Profiles tab.

Edit a device profile

  1. In the Splunk App for Edge Hub and AR, navigate to the Edge Hub Settings page.
  2. Select the Device Profiles tab.
  3. Select a device profile.
  4. Select Open.
  5. Edit the profile.
  6. Select Save.
  7. Enter a name for the profile.
  8. (Optional) Enter a description for the profile.
  9. Select Save. The profile appears in the Device Profiles tab.

Apply a profile to Splunk Edge Hub devices

  1. In the Splunk App for Edge Hub and AR, navigate to the Edge Hub Settings page.
  2. Select the Device Profiles tab.
  3. Select a device profile.
  4. Select Apply to Devices
  5. Select the devices you want to apply the profile to.
  6. Select Apply.
Last modified on 13 May, 2024
Configure Splunk Edge Hub built-in sensors   Set up anomaly alerts for Splunk Edge Hub OS

This documentation applies to the following versions of Splunk® App for Edge Hub and Augmented Reality: 4.7.1, 4.8.0


Was this topic useful?







You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters