Splunk® Universal Forwarder

Forwarder Manual

Acrobat logo Download manual as PDF

This documentation does not apply to the most recent version of Splunk® Universal Forwarder. For documentation on the most recent version, go to the latest release.
Acrobat logo Download topic as PDF

Configure forwarding with outputs.conf

The outputs.conf file defines how forwarders send data to receivers. You can specify some output configurations at installation time (Windows universal forwarders only) or the CLI, but most advanced configuration settings require that you edit outputs.conf.

The topics that describe various forwarding topologies, such as load balancing and intermediate forwarding, provide detailed examples on configuring outputs.conf to support those topologies.

Although outputs.conf is a required file for configuring forwarders, it addresses only the outputs from the forwarder, where you want the forwarder to send the data it collects. To specify the data that you want to collect from the forwarder, you must separately configure the inputs, as you would for any Splunk instance. See Add data and configure inputs in Getting Data In.

Edit outputs.conf to configure forwarding

This procedure details the steps you must take to edit the default outputs.conf which is in $SPLUNK_HOME/etc/system/local. You might have to edit the file in other places, as sections in this topic explain. For an example of what an outputs.conf file looks like, see "Examples of outputs.conf" later in this topic.

  1. On the host that forwards that data that you want to collect, open a shell or command prompt or PowerShell window.
  2. Go to the configuration directory for the forwarder.
    Unix Windows
    cd $SPLUNK_HOME/etc/system/local cd %SPLUNK_HOME%\etc\system\local
  3. Open outputs.conf for editing with a text editor.
    Unix Windows
    vi outputs.conf notepad outputs.conf
  4. Edit outputs.conf. Add a minimum of at least one forwarding target group or a single receiving host.
  5. Save the outputs.conf file and close it.
  6. Restart the universal forwarder to complete your changes.
    Unix Windows
    cd $SPLUNK_HOME/bin
    ./splunk restart
    cd %SPLUNK_HOME%\bin
    .\splunk restart

Types of outputs.conf files

A single forwarder can have multiple outputs.conf files. For example, one can be located in an apps directory and another in $SPLUNK_HOME/etc/system/local. No matter how many outputs.conf files the forwarder has and where they reside, the forwarder combines all their settings, using the rules of configuration file precedence. The forwarder contains both default and custom outputs.conf files.

Default versions of outputs.conf

The universal forwarder ships with these default versions of outputs.conf:

  • One in $SPLUNK_HOME/etc/system/default.
  • Another in $SPLUNK_HOME/etc/apps/SplunkUniversalForwarder/default.

The default version in the SplunkUniversalForwarder app has precedence over the version under /etc/system/default.

Do not edit default versions of any configuration files. See About configuration files.

Custom versions of outputs.conf

When you configure forwarding behavior, those changes get saved in custom versions of outputs.conf. There are several ways you can specify forwarding behavior:

  • While installing the forwarder (on the Windows universal forwarder only.)
  • By running CLI commands.
  • By directly editing an outputs.conf file.

The forwarder automatically creates or edits custom versions of outputs.conf in response to the first three methods. The locations of those versions vary, depending on the type of forwarder and other factors.

  • If you use the CLI to make changes to universal forwarder output behavior, the CLI creates or edits a copy of outputs.conf in $SPLUNK_HOME/etc/system/local.
  • The Windows installation process writes configuration changes to an outputs.conf file located in the MSICreated app.

In addition to any outputs.conf files that you create and edit indirectly (for example, through the CLI), you can also create or edit an outputs.conf file directly with a text editor. You should work with a single copy of the file, which you place in $SPLUNK_HOME/etc/system/local/. If a copy of the file already exists in that directory, because of configuration changes made through the CLI, edit that copy. For purposes of distribution and management simplicity, you can combine settings from all non-default versions into a single custom outputs.conf file.

The universal forwarder must be restarted after you make changes to outputs.conf.

For information on outputs.conf, see the outputs.conf spec file.

Configuration levels for outputs.conf

There are two types of output processors for forwarding data: tcpout and syslog. The universal forwarder only has the tcpout processor, which uses the [tcpout] header in outputs.conf.

You can configure the tcpout processor at three levels of stanzas:

  • Global. (Optional) At the global level, you specify any attributes that you want to apply globally, as well as certain attributes only configurable at the system-wide level for the output processor.
  • Target group. A target group defines settings for one or more receiving indexers. There can be multiple target groups per output processor. Most configuration settings can be specified at the target group level.
  • Single server. (Optional) You can specify configuration values for single servers (receivers) within a target group.

Configurations at the more specific levels take precedence over the global level. For example, if you specify compressed=true for a target group, the forwarder sends the hosts in that target group compressed data, even if you set the compressed attribute to "false" for the global level.

Outputs.conf global stanza

The global stanza in outputs.conf lets you set any attributes that you want to apply globally. While this stanza is optional, there are several attributes that you can set only at the global level, including defaultGroup.

The [tcpout] header specifies the global stanza for the tcpout processor. Following is an example of a global tcpout stanza.


This global stanza includes two attribute/value pairs:

  • defaultGroup=indexer1 This tells the forwarder to send all data to the "indexer1" target group. See "Default target groups".
  • compressed=true This tells the forwarder to compress the data before it forwards the data to receiving indexers in the target groups. If you set compressed to "false", the forwarder sends raw data.

Set default target groups in outputs.conf

The defaultGroup attribute lets you set default groups for automatic forwarding at the global level, in your [tcpout] stanza.

The defaultGroup specifies one or more target groups that you define later in tcpout:<target_group> stanzas. The forwarder sends all events to the specified groups.

defaultGroup= <target_group1>, <target_group2>, ...

If you do not want to forward data automatically, do not set the defaultGroup attribute.

Outputs.conf target group stanza

The target group identifies a set of receivers. It also specifies how the forwarder sends data to those receivers. You can define multiple target groups.

Here is the basic pattern for the target group stanza.

server=<receiving_server1>, <receiving_server2>, ...
<attribute1> = <val1>
<attribute2> = <val2>

You can specify a receiving server in a target group by using the format <ipaddress_or_hostname>:<port>, where <port> is the receiving host receiving port. For example, myhost.splunk.com:9997. When you specify multiple receivers, the forwarder load balances among them.

A target group stanza name cannot have spaces or colons in it. Splunk software ignores target groups whose stanza names contain spaces or colons in them.

See Define typical deployment topologies later in this topic for information on how to use the target group stanza to define several deployment topologies.

Outputs.conf single-host stanza

You can define a specific configuration for an individual receiving indexer. However, the receiver must also be a member of a target group.

When you define an attribute at the single-host level, it takes precedence over any definition at the target group or global level.

Here is the syntax for defining a single-host stanza:

<attribute1> = <val1>
<attribute2> = <val2>

Examples of outputs.conf

The following outputs.conf example contains three stanzas for sending data to Splunk receivers.

  • Global settings. In this example, there is one setting, to specify a defaultGroup.
  • Settings for a single target group consisting of two receivers. Here, we specify a load-balanced target group consisting of two receivers.
  • Settings for one receiver within the target group. In this stanza, you can specify any settings specific to the mysplunk_indexer1 receiver.

server=mysplunk_indexer1:9997, mysplunk_indexer2:9996


Define typical forwarder deployment topologies

You can configure a forwarder to support several typical deployment topologies. See the other topics in the "Forward data" chapter for information on how to configure forwarders for other topologies.

Configure load balancing on a universal forwarder with outputs.conf

When you specify a target group with multiple receivers in outputs.conf on a forwarder, the forwarder performs load balancing between the receivers.

In the example that follows, the target group consists of three receivers. The forwarder balances load between the three receivers you specify. If one receiver goes down, the forwarder automatically switches to the next available receiver.


Note: While 9997 is the standard network port for receiving data from forwarders, you can specify any network port above 1024 to receive data.

Configure data cloning on a universal forwarder with outputs.conf

When you specify multiple target groups with a separate stanza for each group in outputs.conf, the forwarder performs data cloning between the groups. In data cloning, the forwarder sends copies of all its events to the receivers in two or more target groups. Data cloning usually results in similar, but not necessarily exact, copies of data on the receiving indexers. An example of how to configure data cloning follows.




The forwarder sends duplicate data streams to the servers specified in both the indexer1 and indexer2 target groups.

Configure data cloning with load balancing on a universal forwarder

You can combine load balancing with data cloning. For example:




The forwarder sends full data streams to both the cloned_group1 and cloned_group2 groups. The forwarders load-balance the data within each group, rotating among receivers every 30 seconds (the default frequency).

Common attributes for outputs.conf

The outputs.conf file provides a large number of configuration options that offer considerable control and flexibility in forwarding. Of the attributes available, several are of particular interest:

Attribute Default Where configured Value
defaultGroup n/a global stanza A comma-separated list of one or more target groups. Forwarder sends all events to all specified target groups.
server n/a target group stanza Required. Specifies the hosts that function as receivers for the forwarder. This must be set to a value using the format <ipaddress_or_servername>:<port>, where <port> is the receiving server's receiving port.
disabled false any stanza level Specifies whether the stanza is disabled. If set to "true", it is equivalent to the stanza not being there.
sendCookedData true global or target group stanza Specifies whether data is cooked before forwarding.
compressed false global or target group stanza Specifies whether the forwarder sends compressed data.
ssl.... n/a any stanza level Set of attributes for configuring SSL. See "About securing data from forwarders" in the Securing Splunk Enterprise manual for information on how to use these attributes.
useACK false global or target group stanza Specifies whether the forwarder waits for indexer acknowledgment confirming that the data has been written to the file system.
dnsResolutionInterval 300 global or target group stanza Specifies base time interval in seconds at which indexer DNS names will be resolved to IP address.
autoLBVolume 0 global or target group stanza Specifies, in bytes, how much data a forwarder that has been configured for load balancing sends to an indexer before it selects another indexer.

The outputs.conf.spec file, which you can find here, along with several examples, provides details for these and all other configuration options. In addition, most of these settings are discussed in topics that deal with specific forwarding scenarios.

DNS resolution interval

The dnsResolutionInterval attribute specifies the base time interval (in seconds) at which receiver DNS names will be resolved to IP addresses. The forwarder uses this value to compute the run-time interval as follows:

run-time interval = dnsResolutionInterval + (number of receivers in server attribute - 1) * 30

The run-time interval increases by 30 seconds for each additional receiver that you specify in the server attribute (each additional receiver across which the forwarder load-balances.) The dnsResolutionInterval attribute defaults to 300 seconds.

For example, if you leave the attribute at the default setting of 300 seconds and the forwarder is load-balancing across 20 indexers, DNS resolution will occur every 14 1/2 minutes:

(300 + ((20 - 1) * 30)) = 870 seconds = 14.5 minutes

If you change dnsResolutionInterval to 600 seconds, and keep the number of load-balanced indexers at 20, DNS resolution will occur every 19 1/2 minutes:

(600 + ((20 - 1) * 30)) = 1170 seconds = 19.5 minutes
Last modified on 15 October, 2020
Configure the universal forwarder
Supported CLI commands

This documentation applies to the following versions of Splunk® Universal Forwarder: 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6, 7.3.7, 7.3.8, 7.3.9, 8.0.0, 8.0.1, 8.0.2, 8.0.3, 8.0.4, 8.0.5, 8.0.6, 8.0.7, 8.0.8, 8.0.9, 8.0.10

Was this documentation topic helpful?

You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters