Splunk® Enterprise

Search Reference

Acrobat logo Download manual as PDF

Splunk Enterprise version 7.0 is no longer supported as of October 23, 2019. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk® Enterprise. For documentation on the most recent version, go to the latest release.
Acrobat logo Download topic as PDF



Returns information about the buckets in the specified index. If you are using Splunk Enterprise, this command helps you understand where your data resides so you can optimize disk usage as required.

The Splunk index is the repository for data ingested by Splunk software. As incoming data is indexed and transformed into events, Splunk software creates files of rawdata and metadata (index files). The files reside in sets of directories organized by age. These directories are called buckets.

For more information, see Indexes, indexers, and clusters and How the indexer stores indexes in Managing Indexers and Clusters of Indexers.


| dbinspect [index=<wc-string>]... [<span> | <timeformat>] [corruptonly=<bool>]

Required arguments


Optional arguments

Syntax: index=<wc-string>...
Description: Specifies the name of an index to inspect. You can specify more than one index. For all non-internal indexes, you can specify an asterisk ( * ) in the index name.
Default: The default index, which is typically main.
Syntax: span=<int> | span=<int><timescale>
Description: Specifies the span length of the bucket. If using a timescale unit (second, minute, hour, day, month, or subseconds), this is used as a time range. If not, this is an absolute bucket "length".
When you invoke the dbinspect command with a bucket span, a table of the spans of each bucket is returned. When span is not specified, information about the buckets in the index is returned. See Information returned when no bucket span is specified.
Syntax: timeformat=<string>
Description: Sets the time format for the modTime field.
Default: timeformat=%m/%d/%Y:%H:%M:%S
Syntax: corruptonly=<bool>
Description: Specifies that each bucket is checked to determine if any buckets are corrupted and displays only the corrupted buckets. A bucket is corrupt when some of the files in the bucket are incorrect or missing such as Hosts.data or tsidx. Corrupt bucket might return incorrect data or render the bucket unsearchable. In most cases the software will auto-repair corrupt buckets.
When corruptonly=true, each bucket is checked and the following informational message appears.
INFO: The "corruptonly" option will check each of the specified buckets. This search might be slow and will take time.
Default: false

Time scale units

These are options for specifying a timescale as the bucket span.

Syntax: <sec> | <min> | <hr> | <day> | <month> | <subseconds>
Description: Time scale units.
Time scale Syntax Description
<sec> s | sec | secs | second | seconds Time scale in seconds.
<min> m | min | mins | minute | minutes Time scale in minutes.
<hr> h | hr | hrs | hour | hours Time scale in hours.
<day> d | day | days Time scale in days.
<month> mon | month | months Time scale in months.
<subseconds> us | ms | cs | ds Time scale in microseconds (us), milliseconds (ms), centiseconds (cs), or deciseconds (ds)

Information returned when no span is specified

When you invoke the dbinspect command without the span argument, the following information about the buckets in the index is returned.

Field name Description
bucketId A string comprised of <index>~<id>~<guId>, where the delimiters are tilde characters. For example, summary~2~4491025B-8E6D-48DA-A90E-89AC3CF2CE80.
endEpoch The timestamp for the last event in the bucket, which is the time-edge of the bucket furthest towards the future. Specify the timestamp in the number of seconds from the UNIX epoch.
eventCount The number of events in the bucket.
guId The globally unique identifier (GUID) of the server that hosts the index. This is relevant for index replication.
hostCount The number of unique hosts in the bucket.
id The local ID number of the bucket, generated on the indexer on which the bucket originated.
index The name of the index specified in your search. You can specify index=* to inspect all of the indexes, and the index field will vary accordingly.
modTime The timestamp for the last time the bucket was modified or updated, in a format specified by the timeformat flag.
path The location to the bucket. The naming convention for the bucket path varies slightly, depending on whether the bucket rolled to warm while its indexer was functioning as a cluster peer:
  • For non-clustered buckets: db_<newest_time>_<oldest_time>_<localid>
  • For clustered original bucket copies: db_<newest_time>_<oldest_time>_<localid>_<guid>
  • For clustered replicated bucket copies: rb_<newest_time>_<oldest_time>_<localid>_<guid>

For more information, read "How Splunk stores indexes" and "Basic cluster architecture" in Managing Indexers and Clusters of Indexers.

rawSize The volume in bytes of the raw data files in each bucket. This value represents the volume before compression and the addition of index files.
sizeOnDiskMB The size in MB of disk space that the bucket takes up expressed as a floating point number. This value represents the volume of the compressed raw data files and the index files.
sourceCount The number of unique sources in the bucket.
sourceTypeCount The number of unique sourcetypes in the bucket.
splunk_server The name of the Splunk server that hosts the index in a distributed environment.
startEpoch The timestamp for the first event in the bucket (the time-edge of the bucket furthest towards the past), in number of seconds from the UNIX epoch.
state Whether the bucket is warm, hot, cold.
corruptReason Specifies the reason why the bucket is corrupt. The corruptReason field appears only when corruptonly=true.


The dbinspect command is a report-generating command. See Command types.

Generating commands use a leading pipe character and should be the first command in a search.

Accessing data and security

If no data is returned from the index that you specify with the dbinspect command, it is possible that you do not have the authorization to access that index. The ability to access data in the Splunk indexes is controlled by the authorizations given to each role. See Use access control to secure Splunk data in Securing Splunk Enterprise.


1. CLI use of the dbinspect command

Display a chart with the span size of 1 day, using the command line interface (CLI).

myLaptop $ splunk search "| dbinspect index=_internal span=1d"

           _time            hot-3 warm-1 warm-2
--------------------------- ----- ------ ------
2015-01-17 00:00:00.000 PST            0       
2015-01-17 14:56:39.000 PST            0       
2015-02-19 00:00:00.000 PST            0      1
2015-02-20 00:00:00.000 PST     2             1

2. Default dbinspect output

Default dbinspect output for a local _internal index.

| dbinspect index=_internal

Searchref dbinspect ex2.1.png

This screen shot does not display all of the columns in the output table. On your computer, scroll to the right to see the other columns.

3. Check for corrupt buckets

Use the corruptonly argument to display information about corrupted buckets, instead of information about all buckets. The output fields that display are the same with or without the corruptonly argument.

| dbinspect index=_internal corruptonly=true

4. Count the number of buckets for each Splunk server

Use this command to verify that the Splunk servers in your distributed environment are included in the dbinspect command. Counts the number of buckets for each server.

| dbinspect index=_internal | stats count by splunk_server

5. Find the index size of buckets in GB

Use dbinspect to find the index size of buckets in GB. For current numbers, run this search over a recent time range.

| dbinspect index=_internal | eval GB=sizeOnDiskMB/1024| stats sum(GB)


Have questions? Visit Splunk Answers and see what questions and answers the Splunk community has using the dbinspect command.

Last modified on 26 March, 2019

This documentation applies to the following versions of Splunk® Enterprise: 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10

Was this documentation topic helpful?

You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters