Configure Splunk Enterprise to start at boot time

On most operating systems, you can configure Splunk software to start running automatically after the machine and operating system boots. This reduces interruption of both sending and receiving data. All on-premises versions of Splunk software can be configure this way. On *nix platforms, you must manually configure the software to start at boot time after you install it.

You can configure the software as either the root user, or as a regular user with the sudo command. Nearly all distributions include sudo but if yours does not have it, you should consult the help for your distribution to download, install, and configure it.

Enable boot-start on the Windows platform

On Windows, the installer configures Splunk software to start at machine startup. To disable this, see Disable boot-start on Windows at the end of this topic.

Enable boot-start on *nix platforms

Splunk provides a utility that updates your system boot configuration so that the software starts when the system boots up. This utility creates an init script (or makes a similar configuration change, depending on your OS).

1. Log into the machine that you have installed Splunk software on and that you want to configure to run at boot time.
2. Become the root user if able. Otherwise, you must run the following commands with the sudo utility.
3. Run the following command:

   [sudo] $SPLUNK_HOME/bin/splunk enable boot-start
   

Enable boot-start as a non-root user

If you do not run Splunk software as the root user, you can pass in the -user parameter to specify the Splunk software user. The user that you want to run Splunk software as must already exist. If it does not, then create the user prior to running this procedure.

The following procedure configures Splunk software to start at boot time as the user 'bob'. You can substitute 'bob' with the user that Splunk software should use to start at boot time on the local machine.

1. Log into the machine.
2. Become the root user.
3. Run the following command:
   

   [sudo] $SPLUNK_HOME/bin/splunk enable boot-start -user bob
   

4. Change the ownership of the Splunk installation directory and all its files to user bob:

   [sudo] chown -R bob $SPLUNK_HOME
   

5. Using a text editor, open /etc/init.d/splunk for editing.
6. Make the following changes as shown in the "After" table:
   

   Before

   RETVAL=0 . /etc/init.d/functions splunk_start() { echo Starting Splunk... "$SPLUNK_HOME/bin/splunk" start --no-prompt --answer-yes RETVAL=$? [ $RETVAL -eq 0 ] && touch /var/lock/subsys/splunk } splunk_stop() { echo Stopping Splunk... "$SPLUNK_HOME/bin/splunk" stop RETVAL=$? [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/splunk } splunk_restart() { echo Restarting Splunk... "$SPLUNK_HOME/bin/splunk" restart RETVAL=$? [ $RETVAL -eq 0 ] && touch /var/lock/subsys/splunk } splunk_status() { echo Splunk status: "$SPLUNK_HOME/bin/splunk" status RETVAL=$? } case "$1" in

   After

   RETVAL=0 USER=bob . /etc/init.d/functions splunk_start() { echo Starting Splunk... su - ${USER} -c '"$SPLUNK_HOME/bin/splunk" start --no-prompt --answer-yes' RETVAL=$? [ $RETVAL -eq 0 ] && touch /var/lock/subsys/splunk } splunk_stop() { echo Stopping Splunk... su - ${USER} -c '"$SPLUNK_HOME/bin/splunk" stop' RETVAL=$? [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/splunk } splunk_restart() { echo Restarting Splunk... su - ${USER} -c '"$SPLUNK_HOME/bin/splunk" restart' RETVAL=$? [ $RETVAL -eq 0 ] && touch /var/lock/subsys/splunk } splunk_status() { echo Splunk status: su - ${USER} -c '"$SPLUNK_HOME/bin/splunk" status' RETVAL=$? } case "$1" in

   Confirm that each splunk command has single quotes around it.

7. Save the file and close it.

Changes take effect the next time you boot the machine.

Enable boot-start on machines that run systemd

On Linux machines that use the systemd system manager, you can configure Splunk Enterprise to let systemd control it. By default, Splunk Enterprise configures itself to run as a systemd-managed service.

1. Log into the machine that you have installed Splunk software on and that you want to configure to run at boot time.
2. Become the root user if able. Otherwise, you must run the following commands with the sudo utility.
3. Run the following command:

   [sudo] $SPLUNK_HOME/bin/splunk enable boot-start -systemd-managed 1
   

See Run Splunk Enterprise as a systemd service for additional information on Splunk Enterprise and systemd.

Enable boot-start on machines that run AIX

These instructions work for both Splunk Enterprise and the AIX version of the Splunk universal forwarder. Splunk does not offer a version of Splunk Enterprise for AIX for versions later than 6.3.0.

The AIX version of Splunk does not register itself to auto-start on machine boot. You can configure it to use the System Resource Controller (SRC) to handle boot-time startup.

When you enable boot start on an AIX system, Splunk software interacts with the AIX SRC to enable automatic starting and stopping of Splunk services.

mkssys -G splunk -s splunkd -p <path to splunkd> -u <splunk user> -a _internal_exec_splunkd -S -n 2 -f 9
mkssys -G splunk -s splunkweb -p <path to python> -u <splunk user> -a _internal_exec_splunkweb -S -n 15 -f 9 (on Splunk Enterprise only)

When you enable automatic boot start, the SRC handles the run state of the Splunk Enterprise service. You must use a different command to start and stop Splunk software manually.

• /usr/bin/startsrc -s splunkd to start Splunk software manually.
• /usr/bin/stopsrc -s splunkd to stop Splunk software manually.

If you try to start and stop the software with the ./splunk [start|stop] method from the $SPLUNK_HOME directory, the SRC catches the attempt and displays the following message:

Splunk boot-start is enabled. Please use /usr/bin/[startsrc|stopsrc] -s splunkd to [start|stop] Splunk.

To prevent this message from occurring and restore the ability to start and stop Splunk Enterprise from the $SPLUNK_HOME directory, disable boot start:

[sudo] ./splunk disable boot-start

• For more information on the mkssys command line arguments, see Mkssys command on the IBM pSeries and AIX Information Center website.
• For more information on the SRC, see System resource controller on the IBM Knowledge Center website.

Enable boot-start on AIX to run Splunk Software as a root user

1. Log into the AIX machine.
2. Become the root user, if able. Otherwise, you must prepend sudo to the following command examples. If you do not have sudo on your AIX instance, you must download, install, and configure it.
3. Change to the Splunk bin directory.
4. Enable boot start:
   
   [sudo] ./splunk enable boot-start

Enable boot-start on AIX to run Splunk software as a non-root user

1. Log into the AIX machine.
2. Become the root user, if able. Otherwise, you must prepend sudo to the following command examples. If you do not have sudo on your AIX instance, you must download, install, and configure it.
3. Create the user account that the Splunk software should run as. For example, if the splunk user should run the software:

   [sudo] mkuser splunk
   [sudo] chown -R splunk <Splunk directory>
   

4. Change to the Splunk bin directory.
5. Enable boot start and specify the -user flag with the user that the software should run as.
   [sudo] ./splunk enable boot-start -user <user that Splunk should run as>

Enable boot-start on MacOS

Splunk software automatically creates a script and configuration file in the directory /System/Library/StartupItems on the volume that booted your Mac. This script runs when your Mac starts, and automatically stops Splunk when you shut down your Mac.

If you want, you can still enable boot-start manually. You must either have root level permissions or use sudo to run the following command. You must have at least administrator access to your Mac to use sudo. If you installed Splunk software in a different directory, replace the example below with your instance location.

1. Log into your machine.
2. Open the Terminal app.
3. Change to the Splunk bin directory:
   

   cd /Applications/Splunk/bin
   

4. Enable boot start:
   

   [sudo] ./splunk enable boot-start
   

Enable boot-start on MacOS as a non-root user

1. Log into your machine.
2. Open the Terminal app.
3. Change to the Splunk bin directory:
   

   cd /Applications/Splunk/bin
   

4. Enable boot start:
   

   [sudo] ./splunk enable boot-start -user <user Splunk Enterprise should run as>
   

5. Open /Library/LaunchItems/com.splunk.plist for editing.
6. Locate the line that begins with <dict>.
7. Immediately after this line, add the following block of code:
   

       <key>UserName</key>
       <string><user Splunk Enterprise should run as></string>
   

8. Save the file and close it.

Changes take effect the next time you boot the machine.

Disable boot-start

If you want to stop Splunk software from running at machine boot time, run:

[sudo] $SPLUNK_HOME/bin/splunk disable boot-start

Disable boot-start on Windows

By default, Splunk starts automatically when you start your Windows machine. You can configure the Splunk processes (splunkd and splunkweb) to start manually from the Windows Services control panel.

Get more help on boot-start

To learn more about boot-start and how to enable it, see the following:

• The file $SPLUNK_HOME/etc/init.d/README
• The output from the $SPLUNK_HOME/bin/splunk help boot-start command on your Splunk software instance.