Splunk® Enterprise

Updating Splunk Enterprise Instances

Acrobat logo Download manual as PDF


Splunk Enterprise version 8.1 will no longer be supported as of April 19, 2023. See the Splunk Software Support Policy for details. For information about upgrading to a supported version, see How to upgrade Splunk Enterprise.
This documentation does not apply to the most recent version of Splunk® Enterprise. For documentation on the most recent version, go to the latest release.
Acrobat logo Download topic as PDF

Configure deployment clients

This topic explains how to set up deployment clients to receive content from a deployment server. In most cases, you just need to specify the deployment server that you want the client to connect to.

Even though this step occurs on the deployment clients, not the deployment server itself, it is an essential part of the overall configuration of the deployment server system.

Important: The deployment server cannot be a deployment client of itself. If it is, the following error will appear in splunkd.log: "This DC shares a Splunk instance with its DS: unsupported configuration". This has the potential to lead to situations where the deployment clients lose their ability to contact the deployment server.

Specify the deployment server

On each client, you must specify the deployment server it will connect to. You do this by configuring the client's deploymentclient.conf file. Each deployment client must have a unique network hostname.

There are three ways to configure this file:

Important: Do not use the deployment server to push deploymentclient.conf updates to the deployment clients. Doing so can potentially lead to situations where the deployment clients lose their ability to contact the deployment server.

Use the CLI

On the deployment client, run these CLI commands:

splunk set deploy-poll <IP_address/hostname>:<management_port>
splunk restart

Use the IP_address/hostname and management_port of the deployment server you want the client to connect with.

For example:

splunk set deploy-poll deploymentserver.splunk.mycompany.com:8089
splunk restart

Edit deploymentclient.conf

You can also directly create and edit a deploymentclient.conf file in $SPLUNK_HOME/etc/system/local.

Syntax

The deploymentclient.conf file requires two stanzas:

Stanza What it's for
[deployment-client] Configures a number of attributes, including where to find new or updated content. You do not usually need to change the default values for this stanza.
[target-broker:deploymentServer] Specifies the location of this client's deployment server. deploymentServer is the default name for a deployment server. You must specify the deployment server under this stanza.

This file has a large number of optional attributes, but for most deployments, you only need to set the targetUri attribute under the [target-broker:deploymentServer] stanza. This attribute specifies the client's deployment server. Here's the attribute's syntax:

Attribute What it's for Default
targetUri Specifies the deployment server connection information.

Set to <deployment_server_URI>:<management_port>. The management port is typically 8089.

n/a

For a complete list of deploymentclient.conf attributes, see the deploymentclient.conf specification file in the Admin manual.

Important: You must restart the deployment client for the change to take effect.

Example

Here is a typical client configuration:

[deployment-client]

[target-broker:deploymentServer]
targetUri = deploymentserver.splunk.mycompany.com:8089

As is usually the case, this example accepts the default values for nearly all attributes. The one attribute that you must set, the location of the deployment server, has a value of deploymentserver.splunk.mycompany.com:8089.

Set a client name

You can assign each deployment client a client name. The deployment server can filter on client names, as described in "Set up client filters".

By default, the client name is set to the deployment client's GUID. If you plan to use the client name in filtering, it's recommended that you explicitly set it to some reasonable and readable name.

Important: Client names should be unique.

To configure a client name, set the clientName attribute in deploymentclient.conf to the chosen name. For example:

[deployment-client]
...
clientName = Fflanda-LINUX1

Restart the deployment client for the configuration change to take effect.

Get deployment client information

You can find information about the deployment client from two locations:

  • On the deployment client itself
  • On the deployment server

View status from the deployment client

You can view the status of a deployment client from Splunk Web:

1. Click the Settings link at the top of Splunk Web. A window pops up with links to the set of system interfaces.

2. Select Server settings in the System section.

3. Choose Deployment client settings. This takes you to a read-only screen that provides some information about the client:

  • Its deployment server.
  • Its server classes and apps.
  • Its status.

View clients from the deployment server

Once you configure and restart the client, it will initiate a handshake process with the specified deployment server. The deployment server adds it to its list of clients under the Clients tab of the forwarder management interface. For example:

Forwarder management start page.png

Disable a deployment client

To disable a deployment client, run this CLI command on the deployment client:

splunk disable deploy-client

Upgrade a deployment client

You upgrade a client in the usual way, according to whether the client is a universal forwarder or a full Splunk Enterprise instance. The fact that an instance is a deployment client does not make any difference in how you perform the upgrade.

However, after you upgrade the client, the client will appear twice in the client list that the deployment server maintains and presents through the forwarder management interface. To eliminate the duplicate listing, you must restart the deployment server after a client upgrade.

Last modified on 29 March, 2022
PREVIOUS
Plan a deployment
  NEXT
Create deployment apps

This documentation applies to the following versions of Splunk® Enterprise: 7.0.0, 7.0.1, 7.0.2, 7.0.3, 7.0.4, 7.0.5, 7.0.6, 7.0.7, 7.0.8, 7.0.9, 7.0.10, 7.0.11, 7.0.13, 7.1.0, 7.1.1, 7.1.2, 7.1.3, 7.1.4, 7.1.5, 7.1.6, 7.1.7, 7.1.8, 7.1.9, 7.1.10, 7.2.0, 7.2.1, 7.2.2, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.9, 7.2.10, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, 7.3.5, 7.3.6, 7.3.7, 7.3.8, 7.3.9, 8.0.0, 8.0.1, 8.0.2, 8.0.3, 8.0.4, 8.0.5, 8.0.6, 8.0.7, 8.0.8, 8.0.9, 8.0.10, 8.1.0, 8.1.1, 8.1.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6, 8.1.7, 8.1.8, 8.1.9, 8.1.10, 8.1.11, 8.1.12, 8.1.13, 8.1.14, 8.2.0, 8.2.1, 8.2.2, 8.2.3, 8.2.4, 8.2.5


Was this documentation topic helpful?


You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters