The following are the spec and example files for
# Version 8.2.0 #
# This file contains descriptions of the settings that you can use to # customize the way a deployment client behaves. # # Each stanza controls different search commands settings. # # There is a deploymentclient.conf file in the # $SPLUNK_HOME/etc/system/default/ directory. # Never change or copy the configuration files in the default directory. # The files in the default directory must remain intact and in their original # location. # # To set custom configurations, create a new file with the name # deploymentclient.conf in the $SPLUNK_HOME/etc/system/local/ directory. # Then add the specific settings that you want to customize to the local # configuration file. For examples, see deploymentclient.conf.example. # You must restart the Splunk instance to enable configuration changes. # # To learn more about configuration files (including file precedence) see the # documentation located at # http://docs.splunk.com/Documentation/Splunk/latest/Admin/Aboutconfigurationfiles # #*************************************************************************** # Configure a Splunk deployment client # # Note: At minimum, the [deployment-client] stanza must be in # deploymentclient.conf to enable a deployment client. #*************************************************************************** #
# Use the [default] stanza to define any global settings. # * You can also define global settings outside of any stanza, at the top # of the file. # * Each .conf file should have only one default stanza. If there are # multiple default stanzas, their settings combine. When there are # multiple definitions of the same setting, the last definition in the # file takes precedence. # * If a setting is defined at both the global level and in a specific # stanza, the value in the specific stanza takes precedence.
disabled = <boolean> * Whether or not a deployment client is disabled. * Default: false clientName = deploymentClient * A name that the deployment server can filter on. * This setting takes precedence over DNS names. * Default: deploymentClient workingDir = $SPLUNK_HOME/var/run * The temporary folder that the deploymentClient uses to download apps and configuration content. repositoryLocation = $SPLUNK_HOME/etc/apps * The location where content installs when downloaded from a deployment server. * For the Splunk platform instance on the deployment client to recognize an app or configuration content, install the app or content in the default location: $SPLUNK_HOME/etc/apps. * NOTE: Apps and configuration content for deployment can be in other locations on the deployment server. Set both 'repositoryLocation' and 'serverRepositoryLocationPolicy' explicitly to ensure that the content installs on the deployment client in the correct location, which is $SPLUNK_HOME/etc/apps. * The deployment client uses the following 'serverRepositoryLocationPolicy' to determine the value of 'repositoryLocation'. serverRepositoryLocationPolicy = [acceptSplunkHome|acceptAlways|rejectAlways] * The value of 'repositoryLocation' for the deployment client to use. * This setting accepts only the following values: * "acceptSplunkHome": Only accept the value of 'repositoryLocation' the deployment server supplies if it begins with $SPLUNK_HOME. * "acceptAlways": Always accept the 'repositoryLocation' that the deployment server supplies. * "rejectAlways": Always reject the 'repositoryLocation' that the deployment server supplies, and instead use the 'repositoryLocation' that the local deploymentclient.conf file specifies. * Default: acceptSplunkHome endpoint=$deploymentServerUri$/services/streams/deployment?name=$serverClassName$:$appName$ * Specifies the HTTP endpoint from which to download content. * The deployment server can specify different endpoints from which to download different sets of content, such as individual apps. * The deployment client uses the following 'serverEndpointPolicy' to determine which value to use: * $deploymentServerUri$ resolves to "targetUri" defined in the following 'target-broker'stanza. * $serverClassName$ and $appName$ name the server class and the app, respectively. serverEndpointPolicy = [acceptAlways|rejectAlways] * acceptAlways: Always accept the endpoint supplied by the server. * rejectAlways: Reject the endpoint supplied by the server. Always use the preceding endpoint definition. * Default: acceptAlways phoneHomeIntervalInSecs = <decimal> * How frequently, in seconds, this deployment client should check for new content. * Fractional seconds are allowed. * Default: 60. handshakeRetryIntervalInSecs = <integer> * The handshake retry frequency, in seconds. * Could be used to tune the initial connection rate on a new server. * Default: The value of 'phoneHomeIntervalInSecs' / 5 handshakeReplySubscriptionRetry = <integer> * If the Splunk platform is unable to complete the handshake, it will retry subscribing to the handshake channel after this many handshake attempts. * Default: 10 appEventsResyncIntervalInSecs = <number in seconds> * This sets the interval at which the client reports back its app state to the server. * Fractional seconds are allowed. * Default: 10 * the value of 'phoneHomeIntervalInSecs' reloadDSOnAppInstall = <boolean> * Whether or not the deployment server on this instance reloads after an app is installed by this deployment client. * Setting this flag to true causes the deploymentServer on this Splunk platform instance to be reloaded whenever an app is installed by this deploymentClient. * This is an advanced configuration. Only use it when you have a hierarchical deployment server installation, and have a Splunk instance that behaves as both a deployment client and a deployment server. * Do not use a hierarchical deployment server unless you have no other alternative. Splunk has seen problems in the field that have not yet been resolved with this kind of configuration. * Default: false sslVersions = <versions_list> * Comma-separated list of SSL versions to connect to the specified Deployment Server * The versions available are "ssl3", "tls1.0", "tls1.1", and "tls1.2". * The special version "*" selects all supported versions. The version "tls" selects all versions tls1.0 or newer. * If a version is prefixed with "-" it is removed from the list. * SSLv2 is always disabled; "-ssl2" is accepted in the version list but does nothing. * When configured in FIPS mode, ssl3 is always disabled regardless of this configuration. * Default: The 'sslVersions' value in the server.conf file [sslConfig] stanza sslVerifyServerCert = <boolean> * If this is set to true, Splunk verifies that the Deployment Server (specified in 'targetUri') being connected to is a valid one (authenticated). Both the common name and the alternate name of the server are then checked for a match if they are specified in 'sslCommonNameToCheck' and 'sslAltNameToCheck'. A certificate is considered verified if either is matched. * Default: The 'sslVerifyServerCert' value in the server.conf file [sslConfig] stanza caCertFile = <path> * Specifies a full path to a Certificate Authority (ca) certificate(s) PEM format file. * The <path> must refer to a PEM format file containing one or more root CA certificates concatenated together. * Used for validating the SSL certificate from the deployment server * Default: The 'caCertFile' value in the server.conf file [sslConfig] stanza sslCommonNameToCheck = <commonName1>, <commonName2>, ... * If this value is set, and 'sslVerifyServerCert' is set to true, splunkd checks the common name(s) of the certificate presented by the Deployment Server (specified in 'targetUri') against this list of common names. * Default: The 'sslCommonNameToCheck' value in the server.conf file [sslConfig] stanza. sslAltNameToCheck = <alternateName1>, <alternateName2>, ... * If this value is set, and 'sslVerifyServerCert' is set to true, splunkd checks the alternate name(s) of the certificate presented by the Deployment Server (specified in 'targetUri') against this list of subject alternate names. * Default: The 'sslAltNameToCheck' value in the server.conf file [sslConfig] stanza cipherSuite = <cipher suite string> * If set, uses the specified cipher string for making outbound HTTPS connection. * No default. ecdhCurves = <comma separated list of ec curves> * Defines Elliptic Curve-Diffie Hellman curves to use for ECDH key negotiation. * The curves should be specified in the order of preference. * The client sends these curves as a part of Client Hello. * Splunk software only support named curves specified by their SHORT names. * The list of valid named curves by their short/long names can be obtained by executing this command: $SPLUNK_HOME/bin/splunk cmd openssl ecparam -list_curves * For example: ecdhCurves = prime256v1,secp384r1,secp521r1 * Default: empty string connect_timeout = <positive integer> * The amount of time, in seconds, that a deployment client can take to connect to a deployment server before the server connection times out. * Default: 60 send_timeout = <positive integer> * The amount of time, in seconds, that a deployment client can take to send or write data to a deployment server before the server connection times out. * Default: 60 recv_timeout = <positive integer> * The amount of time, in seconds, that a deployment client can take to receive or read data from a deployment server before the server connection times out. * Default: 60 # The following stanza specifies deployment server connection information
targetUri= <string> * The target URI of the deployment server. * An example of <uri>: <scheme>://<deploymentServer>:<mgmtPort> connect_timeout = <positive integer> * See 'connect_timeout' in the "[deployment-client]" stanza for information on this setting. send_timeout = <positive integer> * See 'send_timeout' in the "[deployment-client]" stanza for information on this setting. recv_timeout = <positive integer> * See 'recv_timeout' in the "[deployment-client]" stanza for information on this setting.
# Version 8.2.0 # # Example 1 # Deployment client receives apps and places them into the same # repositoryLocation (locally, relative to $SPLUNK_HOME) as it picked them # up from. This is typically $SPLUNK_HOME/etc/apps. There # is nothing in [deployment-client] because the deployment client is not # overriding the value set on the deployment server side. [deployment-client] [target-broker:deploymentServer] targetUri= deploymentserver.splunk.mycompany.com:8089 # Example 2 # Deployment server keeps apps to be deployed in a non-standard location on # the server side (perhaps for organization purposes). # Deployment client receives apps and places them in the standard location. # Note: Apps deployed to any location other than # $SPLUNK_HOME/etc/apps on the deployment client side will # not be recognized and run. # This configuration rejects any location specified by the deployment server # and replaces it with the standard client-side location. [deployment-client] serverRepositoryLocationPolicy = rejectAlways repositoryLocation = $SPLUNK_HOME/etc/apps [target-broker:deploymentServer] targetUri= deploymentserver.splunk.mycompany.com:8089 # Example 3 # Deployment client should get apps from an HTTP server that is different # from the one specified by the deployment server. [deployment-client] serverEndpointPolicy = rejectAlways endpoint = http://apache.mycompany.server:8080/$serverClassName$/$appName$.tar [target-broker:deploymentServer] targetUri= deploymentserver.splunk.mycompany.com:8089 # Example 4 # Deployment client should get apps from a location on the file system and # not from a location specified by the deployment server [deployment-client] serverEndpointPolicy = rejectAlways endpoint = file:/<some_mount_point>/$serverClassName$/$appName$.tar handshakeRetryIntervalInSecs=20 [target-broker:deploymentServer] targetUri= deploymentserver.splunk.mycompany.com:8089 # Example 5 # Deployment client should phonehome server for app updates quicker # Deployment client should only send back appEvents once a day [deployment-client] phoneHomeIntervalInSecs=30 appEventsResyncIntervalInSecs=86400 [target-broker:deploymentServer] targetUri= deploymentserver.splunk.mycompany.com:8089 # Example 6 # Sets the deployment client connection/transaction timeouts to 1 minute. # Deployment clients terminate connections if deployment server does not reply. [deployment-client] connect_timeout=60 send_timeout=60 recv_timeout=60
This documentation applies to the following versions of Splunk® Enterprise: 8.2.0