Splunk Cloud Platform

Search Tutorial

Use a subsearch

In this section you will learn how to correlate events by using subsearches.

A subsearch is a search that is used to narrow down the set of events that you search on. The result of the subsearch is then used as an argument to the primary, or outer, search. Subsearches are enclosed in square brackets within a main search and are evaluated first.

Let's find the single most frequent shopper on the Buttercup Games online store, and what that shopper has purchased.

The following examples show why a subsearch is useful. Example 1 shows how to find the most frequent shopper without a subsearch. Example 2 shows how to find the most frequent shopper with a subsearch.

Example 1: Search without a subsearch

You want to find the single most frequent shopper on the Buttercup Games online store and what that shopper has purchased. Use the top command to return the most frequent shopper.

  1. Start a new search.
  2. Change the time range to All time.
  3. To find the shopper who accessed the online shop the most, use this search.

    sourcetype=access_* status=200 action=purchase | top limit=1 clientip

    The limit=1 argument specifies to return 1 value. The clientip argument specifies the field to return.

    This screen image shows the results of the search. The results  appear on the Statistics tab in a table. The first columns displays the clientip. The second column displays the count. The third column displays the percent.

    This search returns one clientip value, 87.194.216.51, which you will use to identify the VIP shopper. The search also returns a count and a percent. These are the default fields that are returned with the top command.

  4. You now need to run another search to determine how many different products the VIP shopper has purchased. Use the stats command to count the purchases by this VIP customer.

    sourcetype=access_* status=200 action=purchase clientip=87.194.216.51 | stats count, distinct_count(productId), values(productId) by clientip

    This search uses several statistical functions with the stats command. An alias for the distinct_count() function is dc().

    This screen image shows the results of the search. The results  appear on the Statistics tab in a table. The first columns displays the clientip. The second column displays the count of the number of products purchased, which is 134. The third column displays the number of unique products purchased, which is 14. The fourth column displays the IDs for the products, for example BS-AG-G09 and CU-PG-G06.

    This search uses the count() function to return the total count of the purchases for the VIP shopper. The dc() function is the distinct_count function. Use this function to count the number of different, or unique, products that the shopper bought. The values function is used to display the distinct product IDs as a multivalue field.

The drawback to this approach is that you have to run two searches each time you want to build this table. The top purchaser is not likely to be the same person in every time range.

Example 2: Search with a subsearch

Let's start with our first requirement, to identify the single most frequent shopper on the Buttercup Games online store.

  1. Copy and paste the following search into the Search bar and run the search. Make sure the time range is All time.

    sourcetype=access_* status=200 action=purchase | top limit=1 clientip | table clientip

    This search returns the clientip for the most frequent shopper, clientip=87.194.216.51. This search is almost identical to the search in Example 1 Step 1. The difference is the last piped command, | table clientip, which displays the clientip information in a table. Because you specified only the clientip field with the table command, that is the only field returned. The count and percent fields that the top command generated are discarded from the output.

    To find what this shopper has purchased, you run a search on the same data. You provide the result of the most frequent shopper search as one of the criteria for the purchases search.

    The most frequent shopper search becomes the subsearch for the purchases search. The purchases search is referred to as the outer or primary search. Because you are searching the same data, the beginning of the outer search is identical to the beginning of the subsearch.

    A subsearch is enclosed in square brackets [ ] and processed first when the search criteria are parsed.

  2. Copy and paste the following search into the Search bar and run the search.

    sourcetype=access_* status=200 action=purchase [search sourcetype=access_* status=200 action=purchase | top limit=1 clientip | table clientip] | stats count, distinct_count(productId), values(productId) by clientip

    Because the top command returns the count and percent fields, the table command is used to keep only the clientip value.

    This screen image shows the results of the search. The results appear on the Statistics tab in a table. The first column displays the clientip. The second column displays the count. The third column displays the distinct count of product IDs. The fourth column displays the values of the distinct product IDs.

    These results should match the result of the two searches in Example 1, if you run it on the same time range. If you change the time range, you might see different results because the top purchasing customer will be different.

    The performance of this subsearch depends on how many distinct IP addresses match status=200 AND action=purchase. If there are thousands of distinct IP addresses, the top command has to keep track of all of those addresses before the top 1 is returned, impacting performance. By default, subsearches return a maximum of 10,000 results and have a maximum runtime of 60 seconds. In large production environments, it is possible that the subsearch in this example will timeout before it completes. The best option is to rewrite the query to limit the number of events that the subsearch must process. Alternatively, you can increase the maximum results and maximum runtime parameters.

    Make the search syntax easier to read

    Subsearches and long complex searches can be difficult to read. You can apply auto-formatting to the search syntax to make the the search syntax easier to read in the Search bar. Use the following keyboard shortcut to apply auto-formatting to a search.

    • On Linux or Windows use Ctrl + \.
    • On Mac OSX use Command + \.
    • You can also use Ctrl + Shift + F or Command + Shift + F, which works well with many non-English keyboards.


    This screen image shows the search syntax on the Search bar formatted for easier reading. Subsearches and each piped command are placed on a new line and indented.

    Make the search results easier to understand

    You can make the information more understandable by renaming the columns.

    Column Rename
    count Total Purchased
    dc(productId) Total Products
    values(productId) Product IDs
    clientip VIP Customer

    You rename columns by using the AS operator on the fields in your search. If the rename that you want to use contains a space, you must enclose the rename in quotation marks.

  3. To rename the fields, copy and paste the following search into the Search bar and run the search.

    sourcetype=access_* status=200 action=purchase [search sourcetype=access_* status=200 action=purchase | top limit=1 clientip | table clientip] | stats count AS "Total Purchased", distinct_count(productId) AS "Total Products", values(productId) AS "Product IDs" by clientip | rename clientip AS "VIP Customer"

    This screen image shows the results on the Statistics tab. The first column is VIP Customer with a value of 87.194.216.51. The second column is Total Purchased with a value of 134. The third column is Total Products with a value of 14. The last column is Product IDs and lists the IDs of the products purchased by the VIP customer.

  4. Experiment with this search. What happens when you run the search over different time periods? What if you wanted to find the top product sold and how many people bought it?

Next step

This completes Part 4 of the Search Tutorial.

You have learned how to use fields, the Splunk search language, and subsearches to search your data. Continue to Part 5: Enriching events with lookups.

See also

About subsearches in the Search Manual
The top command in the Search Reference
The stats command in the Search Reference

Last modified on 15 July, 2022
Use the search language   Enabling field lookups

This documentation applies to the following versions of Splunk Cloud Platform: 9.2.2406 (latest FedRAMP release), 8.2.2112, 8.2.2201, 8.2.2202, 9.0.2205, 8.2.2203, 9.0.2208, 9.0.2209, 9.0.2303, 9.0.2305, 9.1.2308, 9.1.2312, 9.2.2403


Was this topic useful?







You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters