Splunk Cloud Platform

Release Notes

Splunk Cloud Platform Field alias behavior change

When you upgrade to version 7.2.4+ of Splunk Cloud Platform, the behavior of certain field alias configurations changes.

A field alias is a way of setting up an alternate name for a field. You can then use that alternate name to search for events that contain that field. Ideally, you should be able to define multiple aliases for a single field, but each alias you define should apply only to one source field. Additionally, when you apply a field alias configuration to a search, the expectation is that the source field is in the events, but the alias field is not in the events.

This issue involves events that already include the alias field, but which are missing the source field or have no value for the source field.

Before the 7.2.4 field alias fix

In versions of Splunk Cloud Platform previous to 7.2.4, when you applied a field alias configuration to events that had the alias field but not the source field, no changes were made to those events. The alias fields were allowed to stay.

This behavior is an erroneous application of the field alias concept. It allows users to have alias field values that do not correspond to source fields.

Example of the old field alias behavior

Here are four events of sample log data. This is what they look like before we apply field alias processing to them. Each of these events has a sourcetype of st1 and a source of example.log.

02-19-2019 19:46:56.122 user=jessica id=123456789 uid=1241 message=this is just a simple example
02-19-2019 19:46:11.342 user=joe id=123777789 message=this is just a simple example
02-18-2019 11:12:56.854 uid=7788 message=this is just a simple example
02-18-2019 11:11:25.478 user=adam message=this is just a simple example

Now, say you want to apply this pair of props.conf field alias configurations to that set of events.

[st1]
FIELDALIAS-class1 = uid AS user

[source::example.log]
FIELDALIAS-class2 = id AS user

With this pair of configurations, events that share a sourcetype of st1 and a source of example.log have the user field aliased to two different source fields: uid and id. These colliding configurations are problematic because field aliases are supposed to reference only one source field at a time.

In addition, you know that user, the alias field, already exists in the events. If your field alias configurations say that the value of user should match a value of either uid or id but the user field in the event already has a value of jessica, how does the search head resolve this? It replaces the user field value with one of the alias field values, according to lexicographical sort order logic.

But the real issue here is with the fourth event, where the alias field exists, but no source field exists. The pre-7.2.4 rules allowed the alias field to stay in an event when there were no source fields in the event.

Here is what the sample events look like after field alias processing with the pre-7.2.4 rules.

02-19-2019 19:46:56.122 user=123456789 id=123456789 uid=1241 message=this is just a simple example
02-19-2019 19:46:11.342 user=123777789 id=123777789 message=this is just a simple example
02-18-2019 11:12:56.854 user=7788 uid=7788 message=this is just a simple example
02-18-2019 11:11:25.478 user=adam message=this is just a simple example

This results in the overwriting of user values in the first two events. The search head resolves the conflict between id and uid in the first event by selecting id.

The search head resolves collisions between two or more AS configurations by applying each of the FIELDALIAS class names in lexicographical sort order. It uses the last class that it applies. So in the first event of this example, it first applies class1 and then applies class2. Because class2 is the last class applied, the user field takes on the value of the id field.

The third event gets a new field. Before processing, it had a source field, but no alias field. After processing it has an alias field with the value of the source field. This is how field aliases are supposed to work.

But the fourth event has an alias field without a source field. After the field alias configuration is applied, the alias field should not appear in events that do not have the corresponding source fields. The logic set by the configuration is not consistent.

After the 7.2.4 field alias fix

In Splunk Cloud Platform 7.2.4, this bug was fixed. The fix changed the behavior when you apply a field alias configuration to an event where the alias field is already present but no source fields exist. This table explains how the behavior has changed and why.

Event contains source field? Event contains alias field? Before 7.2.4, what happened after application of the field alias configuration to the event? After 7.2.4, what happens after application of the field alias configuration to the event? Why does this happen?
Yes Yes The search head replaces the value of the alias field with the value of the source field. The search head replaces the value of the alias field with the value of the source field. If a source field and its alias field are both present in an event they should share the value of the source field.
No Yes Nothing. The search head does not change or remove the alias field. The search head removes the alias field from the event. If a source field is missing from an event, its alias field should not be present in that event.
Yes No The search head adds an alias to the event. It is given the value of the source field in the event. The search head adds an alias to the event. It is given the value of the source field in the event. This is the ideal environment for a field alias. It enables you to search for events using a field name that is an alias for a source field that is already present in those events.
No No Nothing happens. The search head leaves the event unchanged. Nothing happens. The search head leaves the event unchanged. If the event does not have the source field, and the alias field is also not present, there is no need to change the event.

Example of the 7.2.4 fix

This example shows you how the 7.2.4 fix changed the results of some searches. Say you start with the same two field alias configurations:

[st1]
FIELDALIAS-class1 = uid AS user

[source::example.log]
FIELDALIAS-class2 = id AS user

You apply those configurations to the same four events as the preceding examples. Here are the results:

02-19-2019 19:46:56.122 user=123456789 id=123456789 uid=1241 message=this is just a simple example
02-19-2019 19:46:11.342 user=123777789 id=123777789 message=this is just a simple example
02-18-2019 11:12:56.854 user=7788 uid=7788 message=this is just a simple example
02-18-2019 11:11:25.478 message=this is just a simple example

As you can see, the difference in this set of events is that the user field is removed from the fourth event. It is removed because it is an alias field and there is no source field in the event.

The introduction of ASNEW in 7.2.4

Version 7.2.4 of the Splunk Cloud Platform introduced the ASNEW field alias configuration. ASNEW allows you to combine field aliases without overriding or removing values.

For example, say you have a search that runs over events that include the dst field, and you want to apply the following props.conf field alias configuration to it:

[sv1]
FIELDALIAS-classx src AS dst

In the case of events that already have dst, you want the field and its values to be undisturbed by the field alias processing. You do not want dst to be removed, and you do not want the value of dst to be altered. In this case you must change the configuration from AS to ASNEW:

[sv1]
FIELDALIAS-classx src ASNEW dst

When you apply this configuration, the search head passes over instances of dst that are already present in your events. It does not remove them or overwrite them.

Configure settings on Splunk Web

You can use the Overwite field values setting to determine how alias fields are treated when they are already present in events at the time that field alias processing takes place.

Select Overwrite field values for a field alias that uses the corrected field alias behavior. This means that it does what it takes during processing to ensure that the alias fields in the event share the values of their corresponding source fields. See the table in After the 7.2.4 field alias fix for more information.

When Overwrite field values is not selected, the field alias uses the uncorrected behavior, which means that the alias field is not changed or removed if it exists in an event without a source field when field alias processing takes place.

When you create a new field alias, Overwrite field values is not selected by default.

See Create field aliases in Splunk Web for more information about the workflow for field alias creation with the Settings pages.

Using calculated fields to apply an alias field to multiple source fields

Calculated fields provide a more versatile method for applying an alias field to multiple source fields. Use eval functions such as coalesce to determine the order in which colliding source fields are applied to your alias fields.

Calculated fields that use functions like mvappend and mvdedup also enable you to deal with situations where your field alias configuration collides with a field extraction. For example, say you have this combination of a field alias configuration and a field extraction configuration:

[st1]
FIELDALIAS-class1 = uid AS user

[source::example.log]
EXTRACT-class2 = 123(?<user>[0-9]+)789

During a search, the EXTRACT-class2 configuration extracts user field values for events with a source of example.log. Later in the search pipeline, the FIELDALIAS-class1 configuration applies a field alias to events with a source type of st1. FIELDALIAS-class1 gives the user field the same value as uid even when uid is null. As a result, events with a source of example.log and a source type of st1 have the extracted value of the user field overwritten by the contents of the uid field.

Here is the same set of results used earlier in this topic, after they have been processed through these two configurations:

02-19-2019 19:46:56.122 user=1241 id=123456789 uid=1241 message=this is just a simple example
02-19-2019 19:46:11.342 id=123777789 message=this is just a simple example
02-18-2019 11:12:56.854 user=7788 uid=7788 message=this is just a simple example
02-18-2019 11:11:25.478 message=this is just a simple example

This configuration is fine if you intend for the extracted value of user to be overwritten. But if that is not the case, one of the following three calculated field configurations would be a better choice than the FIELDALIAS-class1 configuration, depending on the effect you are trying to achieve:

Calculated field configuration What it does
EVAL-user = coalesce(user, uid) Retains only one field value. Prioritizes the extracted value over the aliased value.
EVAL-user = mvappend(user, uid) Maintains both the extracted and aliased values. Could lead to duplicated values.
EVAL-user = mvdedup(mvappend(user, uid)) Maintains both the extracted and aliased values. No duplicates.
Last modified on 22 September, 2023
Known and fixed issues for   Known Issue: Changes to how the Splunk platform automatically maps SAML groups to Splunk roles

This documentation applies to the following versions of Splunk Cloud Platform: 8.2.2112, 8.2.2201, 8.2.2202, 8.2.2203, 9.0.2205, 9.0.2208, 9.0.2209, 9.0.2303, 9.0.2305, 9.1.2308, 9.1.2312, 9.2.2403 (latest FedRAMP release), 9.2.2406


Was this topic useful?







You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters