Splunk Stream

Installation and Configuration Manual

Acrobat logo Download manual as PDF


This documentation does not apply to the most recent version of Splunk Stream. For documentation on the most recent version, go to the latest release.
Acrobat logo Download topic as PDF

streamfwd.conf

The following is the spec file for streamfwd.conf.

streamfwd.conf.spec


[streamfwd]
* This is currently the only supported stanza for this spec file.
* All streamfwd.conf settings are incorporated under this single stanza.

clientIpSslHashBytes = <integer>
* Defines number of client IP octets to use for SSL processor thread hash algorithm. (min value = 0; max value = 4)
* Applies only if you have _disabled_ useGlobalSSLSessionKeyCache

duplicatePacketWindow = <integer>
* Defines number of packets cached in memory (using a rolling window) to detect duplicate packets.
* Set this to a value greater than zero to enable automatic deduplication of network packets.

hideCreditCardNumbers = <boolean>
* Masks credit card numbers. Set to false to show all credit card numbers.

mapSslServers = <boolean>
* Set to false to disable automatic caching of SSL server certificates to corresponding servers's IP addresses.

maxEventQueueSize = <integer>
* Defines maximum number of events queued for delivery to Splunk.

maxFieldSize = <bytes>
* Defines maximum size of content field.

maxPacketQueueSize = <integer>
* Defines maximum size for each processing thread's packet queue.

maxTcpReassemblyPacketCount = <integer>
* Defines maximum number of TCP packets in reassembly queue per processing thread.

maxTcpSessionCount = <integer>
* Defines maximum number of concurrent TCP/UDP flows per processing thread.

maxFlows = <integer>
* Defines maximum number of concurrent flows per prcessing thread.

pcapBufferSize = <bytes>
* Defines buffer size for each network device. Increase the number of bytes if you see dropped packets.

pingInterval = <seconds>
* Modifies the ping server interval.

processingThreads = <integer>
* Defines number of threads to use for processing network traffic.

sessionKeyTimeout = <seconds>
* Indicates idle time before SSL session keys expire.

tcpConnectionTimeout = <seconds>
* Indicates idle time before TCP/UDP flows expire.

tcpFlowTimeout = <seconds>
* Indicates idle time before TCP flows expire.

udpFlowTimeout = <seconds>
* Indicates idle time before UDP flows expire.

arpFlowTimeout = <seconds>
* Indicates idle time before ARP flows expire.

ipFlowTimeout = <seconds>
* Indicates idle time before IP flows expire.

useGlobalSSLSessionKeyCache = <boolean>
* Enables sharing of SSL cache across processing threads. Set to true to share.

usePacketMemoryPool = <boolean>
* When set to true, Stream forwarder uses a pool allocator to allot memory for storing network packets.
* Because the pool allocator does not release unused memory back to the operating system, setting this
parameter to true may result in high memory usage.
* Set to true only when Stream forwarder is running on a dedicated capture server that processes large
traffic volumes.

configTemplateName = <value>
* Indicates the product template to use. <value> is the valid name of an installed product template (e.g. es, itsi).

indexer.<N>.uri = <value>
* When running Stream forwarder in Independent agent mode, use this parameter to specify the location of 
Splunk indexers where you want to receive Stream forwarder generated events.
* <value> is a valid URI pointing to a Splunk indexer.

analyzeRawSSL = <value>

creditCardNumbersMask = <value>

creditCardNumbersRegex = <value>

httpEventCollectorToken = <value>

ipAddr = <value>

logConfig = <value>

maxEventAttributes = <value>

packetBatchSize = <value>

port = <value>

sslKey = <value>

streamfwdcapture

##############################################################################################################################
# streamfwdcapture
#
# By default, streamfwd listens for traffic on all available network interfaces.
# Using the streamfwdcapture parameter you can restrict data capture to specific interfaces only.
##############################################################################################################################

streamfwdcapture.<N>.bitsPerSecond = <integer>
* Only applies if offline is true.
* Rate limiter: if undefined, defaults to 10 Mbps if <Repeat> is true, else 100 Mbps.

streamfwdcapture.<N>.filter = <BPF>
* Lets you set a BPF (Berkeley Packet Filter) for kernel-level packet filtering. The value of this tag must comply with BPF syntax.
* Only one filter variable per streamfwdcapture parameter is supported.

streamfwdcapture.<N>.interface = <string>
* Specifies a network interface name or a path to a pcap file or a directory of pcap files.

streamfwdcapture.<N>.interfaceRegex = <regex>
* A regular expression specifying which network interfaces to capture.

streamfwdcapture.<N>.offline = <boolean>
* True means use pcap files: interface must be a pcap file or a directory to monitor for pcap files.
* False means interface is a network device name.
* Default is false.

streamfwdcapture.<N>.repeat = <boolean>
* Only applies if interface is a pcap file.
* True means to play back the pcap file repeatedly for continuous load.

streamfwdcapture.<N>.afterIngest = delete | move [<subdir>] | ignore | repeat | stop
* Only applies if interface is a directory.
* Specifies action to take after ingesting a pcap file from the directory.
* delete: Delete the file.
* move [<subdir>]: Move the file to a subdirectory (which will be created if needed).  Default is finished_pcaps.
* ignore: Leave the file but mark it as already processed.
* repeat: Continue to re-ingest all pcap files in rotation.
* stop: Leave the file.  After processing each directory once, stop monitoring.
* Default is move.

streamfwdcapture.<N>.sysTime = <boolean>
* Only applies if offline is true.
* True means to use the system time for packet timestamps instead of actual timestamps from pcap file.  Default is false.

streamfwdcapture.<N>.munge = <boolean>

tcpServer

##############################################################################################################################
# tcpServer
#
# Stream forwarder automatically detects the client and server endpoints when it captures the beginnings of TCP connections.
# If it starts capturing traffic after establishing a TCP connection, Stream forwarder normally assumes that the sender of the
# first packet it sees is the client.
# You can modify this behavior by using the tcpServer parameter to define the endpoints of specific TCP servers.
# If the sender of a packet matches the endpoint, Stream forwarder correctly categorizes it as a server response packet.
##############################################################################################################################

tcpServer.<N>.address = <ip address>

tcpServer.<N>.addressWildCard = <address mask>

tcpServer.<N>.port = <integer>

sslServer

##############################################################################################################################
# sslServer
#
# Stream forwarder detects endpoint encryption, and attempts to decrypt SSL sessions using the available private keys.
# Optionally, you can explicitly define the traffic as encrypted by adding sslServer parameters.
##############################################################################################################################

sslServer.<N>.address = <ip address>

sslServer.<N>.port = <integer>

netflowReceiver

##############################################################################################################################
# netflowReceiver
#
# By default, streamfwd listens for traffic on all available network interfaces.
# Using the netflowReceiver parameter streamfwd can receive flow data (netflow/sflow) from network devices.
##############################################################################################################################

netflowReceiver.<N>.ip = <ip address>
* IP address to bind to. Default uses first available ip

netflowReceiver.<N>.port = <integer>
* Port number to listen for flow data.

netflowReceiver.<N>.decoder = <flow decoder>
* Flow protocol to listen for. Valid values are netflow and sflow

netflowReceiver.<N>.filter = <ip address>
* Comma separated list of ip addresses that are allowed to send flow data to this streamfwd instance. Default allows for all ip's to send data

netflowElement

##############################################################################################################################
#netflowElement
#
# Allows for adding enterprise specific flow elements. This maps enterprise element id to stream forwarder vocabulary term.
# Make sure to add the termid to steamfwd vocabulary in vocabulary.xml file
##############################################################################################################################

netflowElement.<N>.enterpriseid = <integer>
* IANA defined enterprise ID e.g. 25461 for Palo Alto Networks as defined here http://www.iana.org/assignments/enterprise-numbers/enterprise-numbers

netflowElement.<N>.id = <integer>
* ID of Enterprise element e.g. 100

netflowElement.<N>.termid = <vocabulary term>
* streamfwd vocabulary term the above element id maps to e.g. netflow-paloalto.user-id.
Last modified on 22 February, 2017
PREVIOUS
streamfwd command line options
  NEXT
Configure universal forwarder for Splunk_TA_stream

This documentation applies to the following versions of Splunk Stream: 7.0.0, 7.0.1


Was this documentation topic helpful?


You must be logged into splunk.com in order to post comments. Log in now.

Please try to keep this discussion focused on the content covered in this documentation topic. If you have a more general question about Splunk functionality or are experiencing a difficulty with Splunk, consider posting a question to Splunkbase Answers.

0 out of 1000 Characters