Upgrade a distributed AMI or OVA installation of Splunk UBA
Perform the following steps to upgrade a distributed AMI or OVA installation of Splunk UBA.
Upgrading to Splunk UBA version 5.3.0 on an AMI or OVA also requires you upgrade to Ubuntu version 20.04.
Prerequisites
Complete the following steps to ensure your system is correctly set up for upgrading Splunk UBA:
- Confirm you meet the Upgrade Splunk UBA prerequisites. Make sure that the prerequisites are verified on each server in the distributed deployment.
- Make sure the correct hadoop ports are open. See, Inbound networking port requirements.
- Ensure you Verify Postgres Collate and Ctype values.
- If you have enabled the integration that sends UBA audit data to Splunk Enterprise Security (ES), preserve the associated certificate before upgrading.
Use the following command to export the certificate:For more info on sending audit data to ES see, Send Splunk UBA audit events to Splunk ES in the Send and Receive Data from the Splunk Platform manual.. /opt/caspida/bin/CaspidaCommonEnv.sh sudo keytool -exportcert -alias "splunk es" -keystore $JAVA_HOME/lib/security/cacerts -rfc -file ~/splunk-es_cacert.pem
- If you have enabled validation of the SSL certificate from Splunk ES, export the SSL certificate used for validating datasources from the Splunk Enterprise platform:
. /opt/caspida/bin/CaspidaCommonEnv.sh sudo keytool -exportcert -alias "SplunkESRootCA" -keystore $JAVA_HOME/lib/security/cacerts -rfc -file ~/SplunkESRootCA.pem
- For 1, 3, 5, 7, and 10 node deployments, run the following command from the Management node. For 20 and 20XL node deployments, run the following command from from the Management node and Node 2:
psql -d caspidadb -c "UPDATE rulepackages SET version = 0 WHERE namespace LIKE 'secteam.%';"
Distributed environment upgrade steps
The Splunk UBA AMI and OVA images use Ubuntu as the operating system. Ensure that Splunk UBA is running before you upgrade, then perform the following tasks to upgrade Splunk UBA across multiple servers with the Ubuntu operating system.
To obtain and install Splunk UBA 5.3.0, perform the following tasks on the management node:
- On the management node only, stop all the caspida services.
/opt/caspida/bin/Caspida stop-all
- On each node, archive the previous UBA release. Replace
<old-uba-version>
with your version of UBA:sudo mkdir -p /var/vcap/release_archives sudo mv /opt/caspida /var/vcap/release_archives/caspida-<old-uba-version> sudo mkdir -p /opt/caspida && sudo chown caspida:caspida /opt/caspida sudo chown caspida:caspida /var/vcap/release_archives sudo chown caspida:caspida /var/vcap/release_archives/caspida-<old-uba-version>
- On each node, download the latest UBA branch build
splunk-uba-software-upgrade-package_530.tgz
and untar the UBA bits to/home/caspida
directory:$ tar xvzf /home/caspida/splunk-uba-software-upgrade-package_530.tgz Splunk-UBA-Platform-5.3.0-20230810-11068359.tgz Splunk-UBA-Platform-5.3.0-20230810-11068359.tgz.md5sum uba-ext-pkgs-5.3.0.tgz uba-ext-pkgs-5.3.0.tgz.md5sum
- On each node, untar the UBA 5.3.0 Platform build inside the /opt/caspida/ folder:
tar xvzf /home/caspida/Splunk-UBA-Platform-5.3.0-20230810-11068359.tgz -C /opt/caspida
- On each node update the package information.
- On each node, remove grub-pc package, then reinstall. This is done because there is an existing Ubuntu upgrade bug that is avoided with a clean install of this package.
- Remove by purging the grub-pc package:
sudo apt-get purge grub-pc -y
- Reinstall grub-pc package:
sudo apt-get install grub-pc -y
- When the interactive prompt comes up to choose a disk, select your BOOT disk if known. If BOOT disk is not known, select all disk choices.
Failure to choose the correct disk will result in it not being able to boot up.
- Remove by purging the grub-pc package:
- On each node, reboot the system:
sudo reboot
- Upgrade from Ubuntu 18.04 to Ubuntu 20.04 on each node using these steps:
- On each node, install the newest available versions of all packages and reboot. Run the following commands:
sudo apt-get update sudo apt-get dist-upgrade sudo reboot
- On each node, upgrade the OS to Ubuntu 20.04 with the following command:
sudo /opt/caspida/upgrade/utils/upgrade_ubuntu.sh -t 20.04
- On each node, reboot the system:
sudo reboot
- Set or update the following environment variable for PostgreSQL in the /etc/default/locale file:
Change theLANG
value toen_US.UTF-8
- Run the following command to source
/etc/default/locale
:
source /etc/default/locale
- On the management node, run the UBA upgrade script, using the path to your archived UBA from step 2. Migrate your configurations in a tmux shell just in case your SSH connection breaks.
The
path-to-prev-uba-archive
might be/var/vcap/release_archives/caspida-
depending on your archived UBA version number.$ tmux $ /opt/caspida/upgrade/utils/upgrade_uba.sh -p <path-to-prev-uba-archive> -e /home/caspida/uba-ext-pkgs-5.3.0.tgz
The command installs the new Splunk UBA software, restarts Splunk UBA, and then restarts the data sources.
If you are upgrading from UBA version 5.2.0 and you are on Ubuntu 20.04, there is no need to upgrade Ubuntu. Proceed directly to step 9.
sudo apt-get update
If you have previously imported an output connector certificate, re-import the certificate. See, Configure the Splunk platform to receive data from the Splunk UBA output connector in the Send and Receive Data from the Splunk Platform manual.
Apply security patches on Ubuntu
The Splunk UBA AMI and OVA images use Ubuntu as the operating system. Perform the following tasks to apply the latest security patches to your Ubuntu operating system:
Applying the security patches can take up to one hour.
- Log in to the Splunk UBA management node as the caspida user.
- On the management node, run the following command to stop Splunk UBA and all services:
/opt/caspida/bin/Caspida stop-all
- On each Splunk UBA node, perform the following tasks:
- Log in as the caspida user.
- Run the following commands to install latest unattended-upgrades package:
sudo apt update sudo apt install unattended-upgrades
If you see the following prompt, select keep the local version currently installed:
What do you want to do about modified configuration file 50unattended-upgrades?
- Run the following command:
sudo apt autoremove
- Edit the
/etc/apt/apt.conf.d/50unattended-upgrades
file and un-comment the following line:Skip this step if you have previously applied security patches to your Ubuntu environment following these instructions.
"${distro_id}:${distro_codename}-security";
Leave all other lines commented out. - Run the following command:
sudo unattended-upgrade -d
- Edit the
/etc/init.d/zookeeper-server
file and changesu
torunuser
in all of the following lines:Skip this step if you have previously applied security patches to your Ubuntu environment following these instructions.
Before:
su -s /bin/bash zookeeper -c "${DAEMON_SCRIPT} start" su -s /bin/bash zookeeper -c "${DAEMON_SCRIPT} stop" su -s /bin/bash zookeeper -c "zookeeper-server-initialize $*"
After:
runuser -s /bin/bash zookeeper -c "${DAEMON_SCRIPT} start" runuser -s /bin/bash zookeeper -c "${DAEMON_SCRIPT} stop" runuser -s /bin/bash zookeeper -c "zookeeper-server-initialize $*"
- Reboot the system:
sudo reboot
- On the management node, run the following command to start Splunk UBA and all services:
/opt/caspida/bin/Caspida start-all
Re-import the certificate used for sending UBA audit events to Splunk ES
If you have enabled the integration that sends UBA audit data to Splunk Enterprise Security (ES), and you preserved the associated certificate in the Before you begin step, you can now re-import that certificate. Use the following command to re-import the certificate:
. /opt/caspida/bin/CaspidaCommonEnv.sh sudo keytool -import -alias "splunk es" -keystore $JAVA_HOME/jre/lib/security/cacerts -rfc -file ~/splunk-es_cacert.pem
Re-import the SSL certificate used for validating datasources from the Splunk Enterprise platform
If you have enabled the integration that sends UBA audit data to Splunk Enterprise Security (ES), use the following command to re-import the SSL certificate:
. /opt/caspida/bin/CaspidaCommonEnv.sh sudo keytool -import -alias "SplunkESRootCA" -keystore $JAVA_HOME/jre/lib/security/cacerts -file ~/SplunkESRootCA.pem
For more information on SSL certificate validation, see Configure flag to enable or disable Splunk SSL certificate validation.
Troubleshoot the Ubuntu upgrade
While upgrading Ubuntu some environment specific issues can arise. See the following known issues and how to work around them.
Snapd
You might encounter the following error message if snapd is in an unexpected state:
FileNotFoundError: [Errno 2] No such file or directory: 'snap'
Workaround steps:
- Remove and purge the snapd package:
sudo apt purge snapd
- Reinstall the snapd package:
sudo apt install snapd
- Re-run the
upgrade_ubuntu.sh
script.
Next steps
You can Verify a successful upgrade of Splunk UBA.
By default, the caspida user is given ALL access in /etc/sudoers
during Splunk UBA installation and upgrade. If you want to restrict sudo
access for the caspida user after Splunk UBA is upgraded, see Restrict sudo access for the caspida account.
Upgrade a single node OEL installation of Splunk UBA | Upgrade a distributed RHEL installation of Splunk UBA |
This documentation applies to the following versions of Splunk® User Behavior Analytics: 5.3.0
Feedback submitted, thanks!