Monitor your services with the ITSI Service Analyzer

The Service Analyzer in IT Service Intelligence (ITSI) shows a unified view of all the services and KPIs in your IT environment. To access the Service Analyzer tile view, click the tile icon on the Service Analyzer. Whichever view you save last loads the next time you open the Service Analyzer.

The Service Analyzer lists the top 50 most critical services and KPIs you're monitoring. Change the number of services or KPIs to display by clicking the gear icon . The number and color of each tile indicates the current severity level of the service or KPI, while the sparkline shows the trend of the value for the selected time range. The following image shows an example Service Analyzer:

A notification icon ( ) on a tile indicates one or both of the following conditions exists within the selected time range:

• The service or KPI has one or more entities in a degraded state.
• The service has one or more critical or high episodes associated with it.

Hover over the icon to find out which conditions exist. Select the tile to open the side panel with more information.

You can only view services and KPIs that you have read access to. Read and write access to services and KPIs is controlled by teams. For information about teams, see Overview of teams in ITSI in the Administration Manual.

The minimum time range that can be selected in the time picker is 45 minutes. This is the minimum length of time needed to ensure all KPI data is available.

Filter services and KPIs

You can't filter services or KPIs unless you have read access to those services and KPIs.

Filter the services and KPIs in your environment using the Filter Services, Filter KPIs, and Filter by Tags boxes. When you filter by service, only the KPIs that belong to the filtered services are displayed. When you filter by KPI, only the services associated with the KPI are displayed. When you filter by tags, only services containing those tags are shown, as well as their KPIs.

All filters added within a single filter box have an implied OR clause. For example, service_A OR service_B. However, across the filter boxes there's an implied AND clause. For example, service_A AND kpi_B AND tag_C.

The checkboxes for showing disabled and dependent services are applied after the filters in the boxes. For example, if you filter to the Buttercup Store service and enable Show service dependencies, additional KPIs appear that are part of the dependent services. However, if you then add a KPI filter for one of those additional KPIs, nothing is returned because now nothing fits the combination of filters in the filter boxes.

The filters support wildcards. For example, if you want to display only your three database services called DB1, DB2, and DB3, you could simply filter by DB*.

You can also filter the KPIs for already filtered services. For example, to see only the Database Service Response Time KPI for the three database services, filter your KPIs by *response*.

Show disabled services

By default, disabled services and KPIs associated with disabled services are not shown on the Service Analyzer. Select Show disabled service(s) to display disabled services and their corresponding KPIs. The tiles for disabled services and KPIs are grey and display N/A instead of a number.

Show service dependencies

By default, when you filter by a service, the Service Analyzer only displays that service and its individual KPIs. Select Show service dependencies to also display the services that impact the filtered service and all KPIs within those services.

Filter KPI values

Click the KPI Value: Aggregate dropdown and select Max Severity if you want to see Max Severity in this view. See Aggregate versus maximum severity KPI values in ITSI for information.

For the Tile view, in the Top 50 Services and Top 50 KPIs sections, click the gear icon and select the number of services and KPIs to monitor.

Automatically refresh the Service Analyzer

You can configure the Service Analyzer to automatically refresh. By default, auto-refresh is disabled. Enable it in itsi_service_analyzer.conf.

Auto-refresh automatically refreshes all of the searches displayed on the Service Analyzer. So if you have the KPI side panel open, those searches are also executed. Auto-refresh doesn't execute service health score or KPI calculations. It only refreshes the searches on the Service Analyzer by fetching the latest calculated health score from the itsi_summary index.

Real-time searches such as Real-time and All time are not available in the time range picker.

Prerequisites

• Only users with file system access, such as system administrators, can enable automatic refresh using a configuration file.
• Review the steps in How to edit a configuration file in the Admin Manual.

Never change or copy the configuration files in the default directory. The files in the default directory must remain intact and in their original location.

Steps

1. Open or create a local itsi_service_analyzer.conf file at $SPLUNK_HOME/etc/apps/SA-ITOA/local.
2. Add the following stanza:

   [auto_refresh]
   disabled = 0
   interval = 180
   

3. Restart your Splunk software.

The interval setting is in seconds and defines the time interval to automatically refresh the Service Analyzer. This configuration file setting applies to the default Service Analyzer and all saved service analyzer views.

Create a custom service analyzer view

Create and save any number of custom service analyzer views to meet your particular monitoring needs. You can create tile or tree views. Use the filters to create custom views of service health and save each view as a new service analyzer.

Steps

1. In the main ITSI menu, click Service Analyzer > Analyzers.
2. Click Create Service Analyzer.
3. Enter a Title and optional Description, an set the privacy for the Service Analyzer.
4. Click Create.
5. Click the name of the service analyzer from the Saved Service Analyzers lister page.
6. Open the time range picker and set a time range for the new view. The Service Analyzer only supports relative time ranges, not real-time searches. The time range must be at least 45 minutes.
7. In the Filter Services and Filter KPIs fields, select the services and/or KPIs that you want to display.
   All other services and KPIs are hidden.
8. (Optional) Click the KPI Value: Aggregate dropdown and select Max Severity if you want to see Max Severity in this view.
9. (Optional) For the tree view, set the Minimum Severity and Filter by Service Depth filters to limit your view to services with a specific health score, or to only services that have certain dependencies.
10. For the Tile view, in the Top 50 Services and Top 50 KPIs sections, click the gear icon and select the number of services and KPIs to monitor.
11. Click Save to save the customizations to the Service Analyzer view.

Monitor services

The number displayed in a service tile indicates the service health score. Service health scores range from 0 to 100, with 0 being most critical and 100 being most healthy.

Service Health Score	Severity level	Color
0-20	Critical
20-40	High
40-60	Medium
60-80	Low
80-100	Normal

The service health score calculation is based on the current severity level of service KPIs (critical, high, medium, low, and normal) and the user-defined KPI importance value. For information about how the service health score is calculated, see How service health scores work in ITSI in this manual.

If a service is in maintenance mode, the tile is dark grey and contains a maintenance icon .

Monitor KPIs

The number displayed in a KPI tile is the number returned from the KPI search of the data. For example, you could have a KPI called Successful Logins that is a count of logins to your website. When a KPI is created in ITSI, aggregate severity-level thresholds of Normal, Low, Medium, High, and Critical are defined. If a KPI is split by entity, entity severity-level thresholds are also defined. The color corresponding to the aggregate severity-level is displayed in the KPI tile in the Service Analyzer by default. For more information about configuring KPI severity levels, see Configure KPI thresholds in ITSI in the Service Insights manual.

The name of the service that the KPI is associated with is displayed on the line beneath the name of the KPI for reference.

Grey KPI tiles indicate one of the following conditions:

• The KPI search has returned no data matching the search criteria. The sparkline is flat in this case.
• The KPI is associated with a disabled service (when the Show disabled service(s) check box is checked).
• The KPI is associated with a service in maintenance mode (displayed in dark grey with a maintenance icon )

Drill down to a deep dive

You can drill down from the Service Analyzer tile view to a deep dive where you can view and compare service health scores or KPI search results over time.

1. Select the check box on one or more service or KPI tiles.
2. Click Drilldown to Deep Dive.

If you select a single service or a single KPI, all KPIs associated with that service appear in the deep dive. If you select multiple services or KPIs, only the associated service health scores appear.

For more information about deep dives, see Overview of deep dives in ITSI in this manual.

Investigate a service with poor health

To investigate a service with poor health or a service that displays a notification icon, click the service tile. A panel opens displaying the severity and values of the KPIs associated with the service and up to 20 episodes associated with the service that have a severity of critical or high. Furthermore, you can click on a KPI in the side panel (or on a KPI tile) to see a secondary panel that shows the severity and value of any entities that contribute to the KPI.

If you bookmark or copy the URL for a service analyzer page, the service or KPI that is selected and any side panels that are open are saved as part of the page.

Why does a tile say "Waiting for data"?

You can change the number of tiles shown in the Service Analyzer. If you set the number of tiles too high (50 or greater), the two indexed real-time searches that generate the tiles might hang and show a "Waiting for data" message. This occurs only on the specific search head. This issue mostly occurs as a result of KV store performance issues in a search head cluster environment.

Workarounds:

• Avoid increasing the number of tiles in a search head cluster environment.
• Use filters to display only the specific services and KPIs that require monitoring.
• Set the number of visible tiles to the lowest number possible.